Just A Word

‫م‬.‫م‬.
‫الشركة الكورية للفحص الفنى الشرق األوسط ذ‬

KOREAN TECHNO INSPECTION
MIDDLE EAST CO. LCC
INSPECTION REPORT (IR)

KTI-IR-RFI-7084-HO-839-REV00 Page 1 of 13
DOCUMENT
Third-party Inspection DISTRIBUTION
Inspection Report
ADNOC
OFFICE
SITE
GALFAR
OFFICE v
SECTION (A)- Attendees
CALL OUT WORKS CONTRACT FOR ASR GAS TIE SITE v
PROJECT NAME
INS IN ASAB
SECTION (B)- Description PACKAGE B
of Materials/Products
KTI
PROJECT
P90227
SECTION (C)- Scope of the Inspection
NUMBER PROJECTS v
SECTION
CONTRACT NO (D)- Reference Documentations OPERATIONS v
INDEX:
RFI (NOI) (E)- Description, Inspection Note & Results
SECTION TECHNICAL v
RFI-7084-HO-839
NUMBER INDUSTERIAL v
SECTION (F) - Digital Photos
COUNTRY UNITED ARAB EMIRATES MARKETING
SECTION (G)- Pending
KTI JOB NUMBER Issues, NCRs, Status & Concession Requests
03-19007-003 ELECTRICAL
INSTRUMENT
CLINETSECTION
PO/WO (H)- Attachments
GEC/CD/343/19 TESTING
NUMBER
HUMAN RESORUCES
PROCUREMENT
INSPECTION v
QA / QC v
HSE
IT
NDT & TPI Services
Form code: KTI-TPI-001Rev 01

KTI Middle East Co. LLC
M-36, Plot No 134, Mussafah Industriel City, Abu Dhabi–UAE
Tel. No. +971-2-666 2568 | Fax No. +971-2-666 2569 | [email protected] | www.kti.ae
The inspection report is issued subject to the condition that it is understood and agreed that nothing in this inspection report shall be deemed to relieve any designer, manufacturer, seller,
supplier, repairer or operator of any warranty, expressed or implied, and KTI Middle East Co., LLC shall be limited to the acts or omissions of its employees, agents and subcontractors.
Under no circumstances whatsoever shall KTI Middle East Co. LLC be liable for any injury or damage to any person, or occurring by reason of negligent operation or any defect in materials,
machinery, equipment or other items other than such defects ascertainable by normally accepted testing standards and only those items inspected by KTI Middle East Co. LLC and which
are covered by this inspection report.
‫م‬.‫م‬.‫الشركة الكورية للفحص الفنى الشرق األوسط ذ‬
MIDDLE EAST CO. LCC

INSPECTION REPORT NO.: DATE:

KTI-IR-RFI-7084-HO-839-REV00 02-06-2020
CUSTOMER: END USER:
GALFAR ADNOC ONSHORE
VENDOR ADDRESS:
LONESTAR LONESTAR, MUSSAFAH, ABU DHABI
SUB-VENDOR: ADDRESS:
KIT SCI Middle East INSPECTOR/S Mr. BIBIN
SECTION (A): ATTENDEES:

NAME POSITION COMPANY
Mr. BIBIN KTI TPI Inspector GALFAR
Mr.Mujahid Ali ADNOC TPI Adnoc
Mr.Ajith Peter QC Inspector Lonestar
Mr.
Mr.
SECTION (B): DESCRIPTION OF MATERIALS/Products

Sample ID Description Material Grade Heat NO Manufacturer
3” Dia x SCH 10S Thick 90
400-65024 A403,SS316L 60NSKJ004 BENKAN
degree Elbow
3” Dia to 2” Dia x SCH 10S
400-65025 A403,SS316L 62DSWJ038-1 BENKAN
Thick Eccentric Reducer
3” Dia x SCH 40 Thick 45
400-65026 A420,WPL6 62D01M090 BENKAN
degree Elbow
1/2” Dia x SCH XXS Thick OFFICINE
400-65027 A182,F316L E171204
RTJ, 2500# Flange SANTAFEDE
1” Dia to 1/2” Dia x SCH
400-65028 XXS Thick Eccentric A182,F316L 45586 PROMAT.BD
Reducer
2” Dia x SCH 40S Thick ASTM A312
400-65029 728812 MANNESMANN
Pipe TP 310S
3” Dia x SCH 40S Thick ASTM A312
400-65030 162962 MANNESMANN
Pipe TP 310S
6” Dia x 21.95mm Thick
400-65031 API 5L X65 314588/354747 VALLOUREC
Pipe
Client PO Number GEC/CD/343/19
ITEM COMPLETION STATUS
% ENGINEERING & % PO RECEIVED
% MANUFACTURING % INSPECTION & TESTS
DOCUMENTATION MATERIALS
NDT & TPI Services

MIDDLE EAST CO. LCC

XXX % XXX % XXX % XXX %

NDT & TPI Services

MIDDLE EAST CO. LCC

SECTION (C): SCOPE OF THE INSPECTION
PRELIMINARY YES PARTIAL

INSPECTION CONSTRUCTION ORDER
PROGRESSIVE INSPECTION
STEP INSPECTION STATUS
COMPLET
FINAL INSPECTION NO
E
INSPECTION DATE: PREVIOUS INSPECTION DATE: NEXT INSPECTION DATE:
02-06-2020 NA 03-06-2020
C-1: Inspection Status/Dates
C-2: Inspection Target
Factory Acceptance Test (FAT) Final Inspection
Visual Examination, Dimension Checks Packing
Witnessing Tests Inspection Data Sheet
Manufacturing Progress Status Documents Review
Vendor Assessment Mechanical Testing
C-3: Inspection Quantities:

PO Cumulative Pending
Sr. Item ITEM Offered Accepted Released Qty. Balanc TAG or HEAT
MATERIAL Quantit Released Inspection
No No DESCRIPTION Quantity Quantity (This visit) e Qty No#
y Qty Activity
WQT/PL-047
Test Coupons API 5L X65 PSL- JILIA76(PM1) to
1 4 4
for Fillet fracture 2 JILIA76(PM2)
test
WQT/PL-047
API 5L X65 PSL- JILIA76(PM1) to
2 Test Coupons 2 2
2 JILIA76(PM2)
for Macro
WQT/PL-048
Test Coupons API 5L X65 PSL- JILIA76(PM1) to
3 4 4
for Fillet fracture 2 JILIA76(PM2)
test
WQT/PL-0478
API 5L X65 PSL- JILIA76(PM1) to
4 Test Coupons 2 2
2 JILIA76(PM2)
for Macro
1/2” Dia x SCH

XXS Thick RTJ,
5 A182,F316L 1 1 E171204
2500# Flange
Tensile test
2” Dia x SCH
ASTM A312
6 40S Thick Pipe 1 1 728812
TP 310S
Tensile test
NDT & TPI Services

MIDDLE EAST CO. LCC

3” Dia x SCH
ASTM A312
7 40S Thick Pipe 1 1 162962
TP 310S
Tensile test
6” Dia x
21.95mm Thick
8 API 5L X65 1 1 314588/354747
Pipe
Tensile test
3” Dia x SCH 40
Thick 45 degree
9 A420,WPL6 1 1 62D01M090
Elbow
Impact test
6” Dia x
21.95mm Thick
10 API 5L X65 1 1 314588/354747
Pipe
Impact test
3” Dia x SCH
10S Thick 90
11 degree Elbow A403,SS316L 1 1 60NSKJ004
Brinell
Hardness test
3” Dia to 2” Dia
x SCH 10S
Thick Eccentric
12 A403,SS316L 1 1 62DSWJ038-1
Reducer
Brinell
Hardness test
3” Dia x SCH 40
Thick 45 degree
13 Elbow A420,WPL6 1 1 62D01M090
Brinell
Hardness test
1/2” Dia x SCH
XXS Thick RTJ,
14 2500# Flange A182,F316L 1 1 E171204
Brinell
Hardness test
1” Dia to 1/2”
Dia x SCH XXS
Thick Eccentric
15 A182,F316L 1 1 45586
Reducer
Brinell
Hardness test
2” Dia x SCH
40S Thick Pipe ASTM A312
16 1 1 728812
Rockwell TP 310S
Hardness test
3” Dia x SCH
40S Thick Pipe ASTM A312
17 1 1 162962
Rockwell TP 310S
Hardness test
6” Dia x
21.95mm Thick
18 Pipe API 5L X65 1 1 314588/354747
Vickers
Hardness test
2” Dia x SCH
ASTM A312
19 40S Thick Pipe 1 1 728812
TP 310S
Flattening test
3” Dia x SCH
ASTM A312
20 40S Thick Pipe 1 1 162962
TP 310S
Flattening test
NDT & TPI Services

MIDDLE EAST CO. LCC

1/2” Dia x SCH

XXS Thick RTJ,
21 A182,F316L 1 1 E171204
2500# Flange
Chemical test
3” Dia x SCH 40
Thick 45 degree
22 A420,WPL6 1 1 62D01M090
Elbow
Chemical test
x SCH 10S
23 Thick Eccentric A403,SS316L 1 1 62DSWJ038-1
Reducer
Chemical test
3” Dia x SCH
10S Thick 90
24 A403,SS316L 1 1 60NSKJ004
degree Elbow
Chemical test
1” Dia to 1/2”
Dia x SCH XXS
25 Thick Eccentric A182,F316L 1 1 45586
Reducer
Chemical test
2” Dia x SCH
ASTM A312
26 40S Thick Pipe 1 1 728812
TP 310S
Chemical test
3” Dia x SCH
ASTM A312
27 40S Thick Pipe 1 1 162962
TP 310S
Chemical test
6” Dia x
21.95mm Thick
28 Pipe API 5L X65 1 1 314588/354747
Vickers
Hardness test
6” Dia x
21.95mm Thick
29 API 5L X65 3 314588/354747
Pipe
SSC-Loading
3” Dia x SCH
10S Thick 90
30 A403,SS316L 1 1 60NSKJ004
degree Elbow
IGC-Loading
x SCH 10S
31 Thick Eccentric A403,SS316L 1 1 62DSWJ038-1
Reducer
IGC-Loading
2” Dia x SCH
ASTM A312
32 40S Thick Pipe 1 1 728812
TP 310S
IGC-Loading
3” Dia x SCH
ASTM A312
33 40S Thick Pipe 1 1 162962
TP 310S
IGC-Loading
NDT & TPI Services

MIDDLE EAST CO. LCC

SECTION (D): REFERENCE DOCUMENTATIONS

D-1: Applicable Procedures, Specifications & Standards:
SR.N DOCUMENT NO DOCUMENT TITLE REV. NO. APPROVAL STATUS

O
1 WPS/7084/PL-09 Rev_1 WPS 1
ASME BPVC.II.A
*DOC STATUS: APP= Approved without comments; AWC=Approved with comments; REJ=Rejected, FI=For Information; CRL= Circulating
D-2 – Instruments Used For Inspection with Calibration Status:
Instrument Serial No./ID No. Calibration Due Date

1. Brinell Hardness tester 200T1160989/LTIS-13447 09-03-2021
2. Rockwell Hardness tester 01/2007-1554/LTIS-6660 09-03-2021
3. Vickers Hardness testing machine 254700/LTIS-6508 10-03-2021
4. Charpy Impact test machine 1566/LTIS-6509 09-03-2021
5. Hydraulic Press LTIS-0193 NA
6. Thermometer 1809000576/LTIS-27916 10-03-2021
7. Universal tensile testing machine 38885/LTIS-6506 09-03-2021
8. Digital caliper A16233040/LTIS-13807 09-06-2020
SECTION (E): DESCRIPTION, INSPECTION NOTE & RESULTS

E-1 – INSPECTION ACTIVITIES: (As per Applicable ITP)
SR. ITP POINT ACCEPTANCE CRITERIA QUANTUM OF

DESCRIPTION OF TEST STATUS
NO COVERED (SPECS/CODES) CHECK (%)
E-2 – INSPECTION DETAILS (Provide details as per ITP& Findings)
Visited M/s Lonestar LLC, Musaffah on 02-06-2020 and the following activities were done as per the RFI-7084-HO-839
1. Macro Examination
Total 02 pcs of Samples were subject to Macro Examination
Traceability marking identified on Test samples as:

At One End Another End
(PM1) M1
(PM2) M2
NDT & TPI Services

MIDDLE EAST CO. LCC

Visual inspection performed the samples which were etched and polished. Noticed the Parent material, Heat Affected zone,
and Weld area with the Number of passes (weld beads) are clearly visible and found in good condition. No visual discontinuity
or defects observed in Macro Examination.
Test samples – 02 pcs were after Macro Analysis – Result – Satisfactory.
1. Hardness Check
Machine No.HTM9248 used for Hardness check.

Hardness values obtained are in the range of 182 to 211 were noted by the Lab personnel and will be reflected on the
Laboratory Report.
Hardness Values obtained are found in acceptable range.
Hardness Testing – Satisfactory.
2. Tensile Testing
U.T.M. Machine No.46280 used for the Mechanical Tensile Testing.

Test samples - Reduced section Width, thickness measured, and the values were note down by Lab personnel.
Initial Gauge Length measured & marked as 50mm.
Tensile Testing performed and the obtained values were noted were found in the range of
Yield Strength – 514 to 573 N/mm square

Tensile Strength – 593 to 662 N/mm square
% Elongation – 36 to 41%
Final Gauge Length – 68mm to 70.5mm
Tensile Testing Values obtained are found in acceptable range.
Tensile Test Result – Satisfactory.
3. Charpy Impact Testing
Machine No.142809 used for the Impact Testing at -20Deg C.

06 sets were tested. Each set consists of 03 samples.
Width x thickness x Length measured as: 10mm x 10mm x 55mm
V Notch profile checked on Profile Projector and found the Profile is in line with the standard drawing.
Impact Testing performed at -20 Deg C with Hold time of 5 minutes.
The Obtained values for the Impact Testing are in range of 312 to 404Joules.
Impact Testing Values obtained are found in acceptable range.
Impact Test Result – Satisfactory.

NDT & TPI Services

MIDDLE EAST CO. LCC

E-3 - INSPECTION FINDINGS:
E- 4 INSPRECTION RESULTS
ACCEPTABLE/SATISFACTORY Yes No
ACCEPTABLE WITH COMMENTS Yes No
REJECTED Yes No
NDT & TPI Services

MIDDLE EAST CO. LCC

Page 10 of
KTI-IR-RFI-7084-HO-839-REV00
13
SECTION (F): DIGITAL PHOTOS
Plates/Beam Dimension check Dimension check
Plate (Heat Mark) Plate (Heat Mark) Plate (Heat Mark)
Plates/Beam Dimension check Dimension check

NDT & TPI Services

MIDDLE EAST CO. LCC

Page 11 of
13
NDT & TPI Services

MIDDLE EAST CO. LCC

Page 12 of
13
SECTION (G): Pending Issues, NCRs, Status & Concession Requests

Punch list issued: Yes No N/A
Punch list number/title:

Punch list attached to this report: Yes
No
NON CONFORMANCE / OBSERVATION REPORTS ISSUED BY INSPECTOR EXPECTED DATE FOR

QUANTITY
COMPLETION
NC ISSUED DURING THE VISIT 0
TOTAL NUMBER OF NC ISSUED SINCE THE BEGINNING 0
NC STILL OUTSTANDING 0
OBS ISSUED DURING THE VISIT 0
TOTAL NUMBER OF OBS ISSUED SINCE THE BEGINNING 0

Note:
Any NCR shall be issued on the same day after inspection and shall be attached to this report.
SECTION (H): LIST OF ATTACHMENTS
SN Attachment(s) and ID No(s) Description Total No. of Pages

1
2
3
4
Total No. of all inspection documents including this IR =
The goods/items specified have been inspected in accordance with the scope of inspection provided. The result is as stated on
the inspection report section-E.
CONCLUSIONS AND REQUIRED ACTIONS
INSPECTOR
Name Signature Date
NDT & TPI Services

MIDDLE EAST CO. LCC

Page 13 of
13
Division Manager
Name Signature Date
NDT & TPI Services


Just A Word

Uploaded by

Copyright:

Available Formats

Just A Word

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Just A Word

Uploaded by

Copyright:

Available Formats

‫م‬.‫م‬.

‫الشركة الكورية للفحص الفنى الشرق األوسط ذ‬

INSPECTION REPORT (IR)

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)

INSPECTION REPORT NO.: DATE:

KIT SCI Middle East INSPECTOR/S Mr. BIBIN

SECTION (A): ATTENDEES:

SECTION (B): DESCRIPTION OF MATERIALS/Products

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)

XXX % XXX % XXX % XXX %

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)

SECTION (C): SCOPE OF THE INSPECTION

PRELIMINARY YES PARTIAL

C-2: Inspection Target

Factory Acceptance Test (FAT) Final Inspection

Visual Examination, Dimension Checks Packing

Witnessing Tests Inspection Data Sheet

Manufacturing Progress Status Documents Review

Vendor Assessment Mechanical Testing

C-3: Inspection Quantities:

1/2” Dia x SCH

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)

1/2” Dia x SCH

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)

SECTION (D): REFERENCE DOCUMENTATIONS

SR.N DOCUMENT NO DOCUMENT TITLE REV. NO. APPROVAL STATUS

Instrument Serial No./ID No. Calibration Due Date

SECTION (E): DESCRIPTION, INSPECTION NOTE & RESULTS

SR. ITP POINT ACCEPTANCE CRITERIA QUANTUM OF

E-2 – INSPECTION DETAILS (Provide details as per ITP& Findings)

Traceability marking identified on Test samples as:

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)

Test samples – 02 pcs were after Macro Analysis – Result – Satisfactory.

Machine No.HTM9248 used for Hardness check.

Hardness Values obtained are found in acceptable range.

Hardness Testing – Satisfactory.

U.T.M. Machine No.46280 used for the Mechanical Tensile Testing.

Yield Strength – 514 to 573 N/mm square

Tensile Testing Values obtained are found in acceptable range.

Tensile Test Result – Satisfactory.

3. Charpy Impact Testing

Machine No.142809 used for the Impact Testing at -20Deg C.

Impact Testing performed at -20 Deg C with Hold time of 5 minutes.

Impact Testing Values obtained are found in acceptable range.

Impact Test Result – Satisfactory.

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)

E-3 - INSPECTION FINDINGS:

ACCEPTABLE WITH COMMENTS Yes No

Form code: KTI-TPI-001Rev 01

INSPECTION REPORT (IR)