SM-J106B DS Tshoo 7 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 33

8.

Level 3 Repair

8-1. Components Layout

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
SM-J106B Dual SIM (J1 mini 3G) BLOCK DIAGRAM
V_BAT VDDRF_1V8 / VDDRF0_1V8 / VDD_DCXO VDD_EMMC_1P8 / VDD1/VDD2/VDDCA/VDDQ_DDR /
VDD_EMMC_3P0 / VDD_MEM_1P2 / VREF_DDR2

TX_TR_OUT_2G_HB/LB LVDS_DLP_P/N

2G_SAW FILTER RX_TR_IN_G1800_P/N


LVDS_ULP_P/N
EMA[0:9] MEMORY
LVDS_ADC/DAC_ON
1IN 4OUT
(SFWG42KB002)
RX_TR_IN_G1900_P/N CP_TR_CLK_26M
EMMC_D(0~7)
(8G Byte eMMC + 8Gb LPDDR3)
MOVI_SD_CLK / MOVI_SD_CMD / MOVI_RST

EMD[0:31] / EMCLKDM / EMCLKDP


H9TQ64A8GTACUR-KUM
EMDQM0~3 / EMDQSN0~3
B5_DUPLEXER
(SFW836UYA02) RX_TR_IN_G850_B5_P/N
EMDQS0~3 / EMCSN0 / EMCKE0
3G B5 PAM TX_TR_OUT_B5
(RF3515)

GSM850 TX_MODULE
RF3235
B2_DUPLEXER
(SAYEY1G88CA0B3K) RX_TR_IN_B2_P/N
TRANCEIVER
3G B2 PAM

SIM1
RX : 869.2-893.8 MHz (RF3512)
TX_TR_OUT_B2 VDD_SIM0

TCXO (26Mhz) SIM_RST_N / SIM_CLK


TX : 824.2-848.8 MHz 8Z26000021 SIM_DATA
GSM1900
RX:1930.2-1989.8 MHz Duplexer
SR3533S
SIM2
(SFXG50QY902) B1_TR_IN_B1_P/N VDD_SIM1
TX:1850.2-1909.8 MHz V_BAT /
VDD_WPA SIM2_RST_N / SIM2_CLK
WCDMA B2 SIM2_DATA
RX : 1930-1990 MHz 3G B1/8 PAM
TX_TR_OUT_B1/B8
(SD3108)
TX : 1850-1910 MHz
SD CON
T_FLASH_D(0~3)
WCDMA B5
T_FLASH_CMD / T_FLASH_CLK
RX : 869-894 MHz Duplexer
(SFX897UYF02) RX_TR_IN_G900_B8_P/N T_FLASH_DETECT
TX : 824-849 MHz

VDD_CAM_IO_1P8 / VDD_CAM_A2P8_F /
VDD_CAM_1P2

5M_CAM
CAM_SDA_1P8 / CAM_SCL_1P8 / CAM_MCLK_5M

CAM_STBY / CAM_RST
CAM_MIPI_CLK_P/N_F
CAM_MIPI_D0_P/N_F
CAM_MIPI_D1_P/N_F

PA_RAMP / BS1 / BS2 / PA_MODE / PA_EN_GSM


VDD_CAM_IO_1P8 / VDD_CAM_A2P8
UCP300
VGA_CAM
CAM_SDA/SCL_1P8
EAR JACK
(EAR MIC)
EAR_MIC_P / EAR_MIC_N
SC7727SE VTCAM_MIPI_D0_P/N_F
EAR_OUT_L / R VTCAM_RST / VTCAM_STBY
BATTERY CONNECTOR
VTCAM_MCLK
KQ03ST1-4R FG_SENSE_P / FG_SENSE_N VTCAM_MIPI_CLK_P/N_F
SPK
SPK_OUT_N / SPK_OUT_P
RCV
RCV_P / RCV_N
AVDD1V8 / VDD1V8 / V_GPS_1.8V /
VDD_RF0_1V8 / VCAM_IO_1.8V /
MAIN MIC MAIN_MIC_N / P
VDD_1P8_AP SENSOR
VDD_EMMC_1V8 / V_SIM_3.0V / SENSOR_SDA/SCL_1P8
V_SIM2_3.1V / V_TSP_3.0V / AVDD2V8 / Accelerator
VCAM_A_2.8V / V_TSP_3.0V / V_LCD_3.0V / ACC_INT_N BMA254
VCAM_AF_2.8V / V_SD_3.0V / VMOT_3.3V / PWR KEY
PWR_ON

VDD_EMMC_3.0V / VDD_USB_3.3V /
VDD_SENSOR_3.0V / VBATBK / VDCDC_GEN
/ VDD_CORE / VDD_DDR_1V2 / VDCDC_GEN
/ VDD_ARM / VDD_WPA / VDDRF_1V5 /
MIC_BIAS_2.8V / EAR_MIC_BIAS_2.8V

LCD
V_LCD_3.0V / V_LCD_1.8V / VDD1V8

LCD_MIPI_D0_P_F / LCD_MIPI_D0_N_F
VDD_GPS_1P8 / VDD_GPS_3P3
LCD_MIPI_CLK_P_F / LCD_MIPI_CLK_N_F
/ VDD_AUXO
SAW_Filter
SAFFB1G56KB0F LCD_MIPI_D1_P_F / LCD_MIPI_D1_N_F
0AR15
GPS_UART_RXD/TXD
GPS V_BAT LCD BLIC
MAIN
GPS_UART_CTS/RTS LED_N
S5N6420X01 LCD_BL_EN KTD2801AECD-TR
TCXO (26Mhz) SLEEP_CLK_32K LED_P_26P
(4" WVGA PLS LCD)
KT2016K26000ACW18TAS

GPS_EN/RST

LCD_RST_N / FLM

FM_IN
WLAN_CLK / CMD

WLAN_D(0 ~ 3) Flash LED


VDD_1P8_AP, VDD_WLAN_1P6, VDD_BT_WLAN_3P3 FLASH LED
BT_UART_CTS_N / RTS_N Driver IC
FLASH_SET/FLASH_EN DB003BS
BT_UART_RXD / TXD RT8547

WIFI/BT/FM BT_WAKE_IN/ BT_WAKE_OUT

SC2331 FM_I2S_D_IN/OUT
FM_I2S_BCLK/LRCK
BT_WIFI_CLK_26M
SLEEP_CLK_32K
BT/BLE ANT SAW_FILTER WLAN_PWR_ON VBUS_5V_IF

: 2402-2480MHz IF Connenctor
LFB182G45SG9B740
WL_TX / WL_RX WIFI_WAKE_OUT AP_UART_RXD/TXD

WLAN USB_AP_D_P/N / USB_ID


GU07J-7P-SB-E1500

: 2412-2462 MHz
VX_Setup(2016-01-20)_HHP
EAR500
ANT200

TP607

TP604

C210 L202
C253
C213

C208 L200

C508
R505
L505

C507

R504 L516
C530
L514

ZD509
ANT500

ANT501

R517

R516

C614

CAM600
L603

ZD506 ZD513 C618


ANT201

L500 C500
C522 ZD508 ZD503
HDC600

ZD512

TP603
C619

C613

L513
L508

C511

TP602

R500 R511 R335


C510

C504

C521
L502

C502 L501
ZD502

L507

TP601
R512

C240
C501 ZD505 L503 R510
L506
TP606

TP605

TP600

TP610 TP611
ZD500
ZD504

L504

C503

R509

C608 R336
C237
L208

L201

C609

C610 C236
F202
SPK500
LED400

C235

CAM601
L207

C611
TP609

C232

R603 U202
L606
TP608

R607
C231

C234
L205

C612 C607
CD500
TAC502

R612

R611

TP_STBY

C444 C617

C615

L402
U601

ANT401

R431
U401
TP_ACC_INT

C616
TAC500

D400
R513 C506 C445
R439
ANT400
L515
L512

OSC200
TP_FLASH_SET

R429

TP_FLASH_EN
C442
C443

C524 C531

C245 C225 C229


ZD507

ZD511

R502
C518

C512

C523
R501

R507

ZD520
ZD524

ZD517

R528 R530
R520
C517

ZD516 C505
TH400

R514

C513
C400

R403

R400
ZD514

ZD515

R525 R526
C515
R519

C533 L517
C509
R529 R531
R533 R503
TAC501

C255
C243
L211

L212

F602 F601 F600 C254


F203

C220 L204
C216

SIM501 SIM500
C219 C221
TP_SLEEP_CLK
R203

C241

C242
L210

TP_MTDO

C214

U200
TP_MTMS

C215
TP_MTCK

C217
C218

TP_U1TXD

C325
TP210 TP212

C345
C201
R202

TP206 TP208
C202

C346
C203

C256
C200

C340
TP_GPS_CTS

TP_GPS_TXD

TP_GPS_RTS
R205

TP_GPS_RST

TP_GPS_EN

TP_GPS_RXD

L209
R609
C233
U201

R610 C247
R204

F201

R604 C249

C248
C239
L206

R337

R506

C252 C365

Q600 C224 C341 C349


C246

C250

C251
C364
R328
R324

C532
R323

R319

C336
R325

C344

C347 C355
C314
C377
C315

C380

C318 C302 C351 C353


C342 C301 C306
C305

C304

C339

OSC300
C370

R402 C350
L306
C311

C348

L304

L303

R401 R329 C361 C362


C354

R327

R1015
C1062

C369

R326

C352
C1064

C366
OSC1000

R331

TH1000 R1012
C374

C373

C359

C343
C372
C307

C308
C1065

C381

C368

C367

C1063
C312 R330
C371
C309
R606
C606
L602
C1083

C378
C357

C332

R1025
L605

L604
TP_SPI_CLK
C1066

C317

C310
L305
C1070

C1079

C1071
TP_SPI_DATA

TP_SPI_LE

C605
C1085

C1088

R1013

C1078

C303
C313
C1049

C1067
C1069
C1089

C1087

C1086

C331 R605
C1072

C334

C1068 C335
C316

C333
C1056

L1020

R308
R310

C338
L301
UCP300
U1000

PAM1003

C1050 R1022

C1095 L1034 R1014 R1019


U600 C603
C319
C1073

TH401
C326

C1082 R1023
C330
PAM1002

C329 C602
R1017

C1091
C1061
C1075
L300 R600
C601

R608

L1028 C321
C1092
C327

C1059 C600
C356

C328
C322

C1074
C1077

R303
C1058
R334
C1055 L1026
C1048

L1015 L1011
L600

R320

L601
L1027
R333
R332

L1019
C1053

C1054

L302
C1037

C1032

C1031

C1023

R321
C1076

C1081

L1014 L1005
L1018

L1021

C358 C454
C1030

C1039

C1007

C1011

C1036 C1028
C337

L1025
R301

R306

C1057
C432

C604

JTAG302

L1030 C300 C375


C428
C455

C376
F1002
F1004

L1024

R305

R315
F1003

L1017

R614

R615
F1000

TP_RST
L1003

L1012
C1060

R300
F1001

U400
R316

R317
L1010

C1051

R613 R417
C1029

C620

R302
C1019

L1023
R307 R418
L400
C526

C528
L1007

C1052
L1029
C453

C1006
R537
R314
C1018

C1017

L1009

C1016
L1013
TP_CA

TP_CS

TP_CKE

C424 TP_DM TP_DQS_C TP_DQS_T

R318
R424
JTAG301

L1004
C360
C1034

C1024 C1040
C423 R309 R322
U300

R438
R422

R434

L1033

C1041 C323 R419


C363

C324

L1016 C1025 C1012


C420 R311
C1042
C427 C448
UME400

R411
C320

C1043
C447
ZD404

R407
C1005

C1044

R1006

ZD400 C451
PAM1001
ZD406

R1007
PAM1000 R406
C379
L1035

C1015 C1096
R410
ZD401
C1021 C416 C418
C1026 L1008 R416 C452
ZD405
R436

R435

L1001
C1022 C1035 C1020
C415 C419
C1045

C1047

C1013 C429
C1010

C1014
C1098

ZD407
R432

L1031 L1032 C414 C409 R428


L1006
C431
C1038 C1027
C1097
ZD408
C449

R433

R415 C403 C408


R408
C404 C407 ZD403 ZD402
R412
R426

R409 C401
R421 R420
RFS1000

R413 C402

C426

C425

R414
R425

R437
R427

R430
R515

R508

C411

C412

R405

C421

C422

R404

C410

C413

C1003 L1000 C1002 ZD523 ZD501 R423 C405 C406 C417


JTAG303

JTAG300

BTC400
TP_GND

TP_UB

BOTH_1002
C1046

C1000

C1004

L401
R1030

R1027 R1026
R535
ZD510

L510
C527
C525

L511

C529 L509
ANT1001

ANT1000
R1003

R10
28
C1094

R1029

BOTH_1000
IFC400 BOTH_1001
R1004

LFB182G45SG9B740(F203) : IT'S
Wrong Polarity possibility.
Check the Pin1
2007-010848(R426) : Check! B
ottom Surface of Component
VX_Setup(2016-01-20)_HHP

CN400

CN401
JTAG304
CN500

MIC500

LFB182G45SG9B740(F203) : IT'S
Wrong Polarity possibility.
Check the Pin1
2007-010848(R426) : Check! B
ottom Surface of Component
8. Level 3 Repair

8-3. Flow Chart of Troubleshooting

Oscilloscope Digital Multimeter

Power Supply + driver, ESD Safe Tweezer

8960 & Spectrum Analyzer Soldering iron

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4. Power On

Mobile phone does not power on.

Check the Battery No Charging the battery by TA.


Voltage.
If its voltage level is extremely low(under 3.0V),
Is it more than 3.8V?
Change the battery.

Yes

Power-on the phone, Yes


check the power-on
sound Change the FRONT-LCD ASSY
or motor Vibration.
is ok?

No

Check the PWR_KEY No


(soldering crack, open, Resolder or replace TAC502
etc)

Yes

Check the UCP300 No If the output voltage is not satisfied with normal
output voltage.
condition, Change the UCP300
R513 ≒ 1.1V
※ voltage level has ±10% margin.

Yes

Check the Replace the OSC1000


Clock OSC1000
No
※ Test condition (Oscilloscope setting)
Is the frequency
26Mhz? : 20.0us.div (time division)

Yes

check the initial operation

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-2. Initial

Initial Failure.

Yes

Re-download latest
SW on the mobile
phone.

Abnormal

NO Check the OSC1000 (Crack, open etc.)


Re Check "8-4-1 Power on"
Trouble shooting process Check the UCP300 (Crack etc)

Yes

Change UCP300

No

Change PBA

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-3. No Service

No service

Yes

Check menu setting


Menu → applications → setting → network connections →
more networks → mobile networks → network mode → setting is auto connect ?

CP : J120HXXXX
Home screen → Phone → Keypad
→ *#1234# → check Phone version Check the Main Antenna exists or not.
→ CP : J105HXXXX or unknown

CP : unknown

Check the components of No


Antenna Path. Is it ok? Resolder the components

Yes

Check VREF No
VREF(C1064, C1065) = Replace the OSC1000
1.8

Yes

Change the PBA

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-4. Sim Part

Insert SIM card

Yes

Is SIM socket ok?

Yes

Is SIM/SD assy No
well connected to Reassemble SIM/SD assy and still SIM does not work,
main board? replace SIM/SD assy

Yes

No Change to the new SIM card.


Check the SIM
Voltage. If it doesn`t still work SIM card after changeing
C517 >= 1.8V? the SIM card, Check the UCP300 (Crack etc)

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-5. Charging Part

- First of all, Please check the battery status.

TA / USB Insert

Yes

Checking Volt at No Reconnect TA or USB


C428 = 5V? or
Swap the Sub PBA

Yes

Checking Volt at No
Resolder or Replace UCP300
C300 = 3.3V?

Yes

Resolder or Check The IC's around UCP300


Replace UCP300 No
or
and then Check Swap the Main PBA.
Charging or not

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-6. Microphone Part

Check microphone function


in voice call receiver mode
or in Voice Recording mode

Something Wrong

Check the MIC on Yes


PBA is placed for Resolder or replace MIC500
any damage

No

Check the L510


soldering status No
and Check the Resolder or replace UCP300
voltage at
L510 = 2.8V

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-7. Speaker Part

Check speaker function.


Play MP3
with maximum volume level.

Something Wrong

Check the Yes


connection of Replace speaker or replace speaker module
Speaker module

No

no
Check the signals
on L512, L515 Resolder or replace L512, L515

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-8. Receiver Part

Check receiver function


in voice call receiver mode

Something Wrong

Check the receiver


& EAR Jack Yes
module for any Reconnect or Replace receiver module
damage (tear in
FPCB, crack, etc)

No

Check the signals no


on L513, L514 OK? Resolder or replace L513, L514

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-9. LCD
.

LCD is still off after PWR ON

Yes

Check the No
connection of Reassemble FRONT assy
HDC600

Yes

check the voltage No


of C609=2.8V? Resolder C609, C610
C610=1.8V? or Replace the UCP300

Yes

Replace Front Assy

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-10. TSP
.

Touch Screen does not work

Yes

Check the No
connection of Reassemble FRONT assy
HDC600

Yes

check the voltage No


Resolder C611
of C611=3.0V? or Replace the UCP300

Yes

Replace Front Assy

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-11. 5M CAMERA
.

Main Camera function does not work

Yes

Check the Camera No


connector on Reconnect the 5M Cam module on CAM601
Main PBA

Yes

Check the voltage


C617 = 1.2 V No Resolder C617, C618, C619
C618 = 2.8V or Replace the UCP300
C619 = 1.8V

Yes

Replace the camera


module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-12. 2M CAMERA
.

Front Camera function does not work

Yes

Check the Camera No


connector on Reconnect the 2M Cam module on CAM600
Main PBA

Yes

Check the voltage


C614 = 2.8V
C613 = 1.8V No Resolder C613, C614

Yes

Replace the camera


module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-13. GSM 850 / WCDMA 850 RX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Rx path No Resolder or change


C1052, C1051, L1017,
L1018, L1021, F1003 Rx path components
Is it ok?

Yes

Check PAM1001, U1000 Yes


Resolder or change
any damage
(Crack, open, etc) PAM1001,U1000 components

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-14. GSM 900 / WCDMA 900 RX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Rx path No Resolder or change


C1019, L1003, C1007,
C1011, L1005, F1000 Rx path components
Is it ok?

Yes

Check PAM1000, Yes


PAM1001, U1000 Resolder or change
any damage PAM1000, PAM1001, U1000 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-15. GSM 1800 RX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Rx path No Resolder or change


L1015, C1032, C1037,
L1012, C1029 Rx path components
Is it ok?

Yes

Check PAM1001, U1000 Yes


any damage Resolder or change
(Crack, open, etc) PAM1001, U1000 components

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-16. GSM 1900 RX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Rx path No Resolder or change


L1011, C1023, C1031,
L1012, C1029 Rx path components
Is it ok?

Yes

Check PAM1001, U1000 Yes


Resolder or change
any damage
(Crack, open, etc) PAM1001, U1000 components

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-17. WCDMA 2100 RX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Rx path
L1007, L1010, L1030,
No Resolder or change
C1030, C1039, L1014,
Rx path components
F1001
Is it ok?

Yes

Check PAM1000, Yes


PAM1001, U1000 Resolder or change
any damage PAM1000, PAM1001, U1000 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-18. WCDMA 1900 RX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Rx path No Resolder or change


C1060, L1024, F1004,
C1076, C1081, L1027 Rx path components
Is it ok?

Yes

Check PAM1003, Yes


PAM1001, U1000 Resolder or change
any damage PAM1003, PAM1001, U1000 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-19. GSM850/GSM900 TX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Tx path No Resolder or change


L1008, C1026, C1015
Is it ok? Tx path components

Yes

Check PAM1001, U1000 Yes


Resolder or change
any damage
(Crack, open, etc) PAM1001, U1000 components

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-20. GSM1800/GSM1900 TX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Tx path No Resolder or change


L1006, C1014, C1010
Is it ok? Tx path components

Yes

Check PAM1001, U1000 Yes


Resolder or change
any damage
(Crack, open, etc) PAM1001, U1000 components

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-21. WCDMA2100 TX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Tx path No Resolder or change


C1034, L1013, F1001,
L1010, L1007 Tx path components
Is it ok?

Yes

Check PAM1000, Yes


PAM1001, U1000 Resolder or change
any damage PAM1000, PAM1001, U1000 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-22. WCDMA1900 TX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Tx path No Resolder or change


C1060, L1024, C1077,
L1028, F1004, C1079 Tx path components
Is it ok?

Yes

Check PAM1003, Yes


PAM1001, U1000 Resolder or change
any damage PAM1003, PAM1001, U1000 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-23. WCDMA850 TX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Tx path No
C1052, C1051, L1017, Resolder or change
F1003, L1020, C1056, Tx path components
L1034, C1053
Is it ok?

Yes

Check PAM1002, Yes


PAM1001, U1000 Resolder or change
any damage PAM1002, PAM1001, U1000 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-24. WCDMA900 TX

It is not catching the channel


in normal condition

Check ANT PATH


Yes
any damage Resolder or change
(ANT1000, ANT1001,
C1094, C1004, C1002, Antenna path components
L1000, C1003, RFS1000)

No

Check Tx path No
C1012, L1033, L1004, Resolder or change
F1000, L1003, C1019 Tx path components
Is it ok?

Yes

Check PAM1000, Yes


PAM1001, U1000 Resolder or change
any damage PAM1000, PAM1001, U1000 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-25. BT/WLAN

BT/WIFI does not work

Check ANT PATH Yes


any damage Resolder or change
(ANT200, C253, L202, Antenna path components
L200, C208, C243, L212)

No

No
Check RF path Resolder or change
L210 Is it ok? RF path components

Yes

Check U200, OSC1000, Yes


U1000, F203 Resolder or change
any damage U200, OSC1000, U1000, F203 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-26. GPS

GPS does not work

Check ANT PATH Yes


any damage Resolder or change
ANT201, L201, C237, Antenna path components
L208, C236

No

Check RF path No
C235, L207, C234, Resolder or change
C233, L206 RF path components
Is it ok?

Yes

Check U201, OSC200, Yes


F201, U202, F202 Resolder or change
any damage U201, OSC200, F201, U202, F202 components
(Crack, open, etc)

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-27. FM RADIO

FM RADIO does not work

Check the volume of Yes


handset. Change the speaker or earphone
Check the earphone.
Is it abnormal?

No

Check RF path No
ZD502, C521, L502, Resolder or change
C501, L204, C221 RF path components
Is it ok?

Yes

Yes
Check U200, EAR500 Resolder or change
any damage
(Crack, open, etc)
U200, EAR500 components

No

Change the board

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-5. Service Schematics

- NC Point(Top View)

UCP300 (AP+CP+PMIC)

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

You might also like