0% found this document useful (0 votes)
139 views7 pages

Cat Electronic Technician 2018C v1.0 Product Status Report

This document provides a status report for a Cat Electronic Technician machine with an ID of FFF01154. It lists diagnostic codes, events, operating hours, and calibration statuses. There are issues with sensors for transmission pressure, gauge clusters, and powertrain controls. The machine has operated for over 6926 hours and calibration is needed for several auxiliary functions that have never been successfully completed.

Uploaded by

Rodolft Rodolft
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
139 views7 pages

Cat Electronic Technician 2018C v1.0 Product Status Report

This document provides a status report for a Cat Electronic Technician machine with an ID of FFF01154. It lists diagnostic codes, events, operating hours, and calibration statuses. There are issues with sensors for transmission pressure, gauge clusters, and powertrain controls. The machine has operated for over 6926 hours and calibration is needed for several auxiliary functions that have never been successfully completed.

Uploaded by

Rodolft Rodolft
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Cat Electronic Technician 2018C v1.

0
Product Status Report

6/20/2020 2:35 AM

Product Status Report


Parameter Value
Product ID FFF01154
Equipment ID D3K
Comments 1cek timing fuel pump
2calibration frp
3adjust valve engingine

Machine Control D3K (FFF01154)


Parameter Value
Product ID FFF01154
Equipment ID D3K
ECM Part Number 3045687-02
ECM Serial Number 27536024MS
Software Group Part Number 4368287-00
Software Group Release Date SEP2013
Software Group Description D3K (FFF/LLL/JTD)
Active Diagnostic Codes Present Yes

Logged Diagnostic Codes [Diagnostic Clock = 6926.5972 hours] - Machine Control D3K
(FFF01154)
Code Description Occ. First Last
811- 9 Gauge Cluster #1 : Abnormal Update Rate 23 6926 6926
133- 5 Transmission Pilot Pressure Supply Solenoid : 1 6925 6925
Current Below Normal
2500- 3 Powertrain Speed Range Control Position Sensor : 3 6819 6820
Voltage Above Normal
2532- 3 Operator Gear Ratio Set/Recall Switch Position : 2 6819 6820
Voltage Above Normal

Logged Event Codes [Diagnostic Clock = 6926.5972 hours] - Machine Control D3K (FFF01154)
Code Description Occ. First Last
E179 (2) Alternator Not Charging 1 6540 6540
E568 (2) Unexpected Left Motor Forward Speed Detected 6 5480 5757
E569 (2) Unexpected Left Motor Reverse Speed Detected 4 5480 5757
E571 (2) Unexpected Right Motor Reverse Speed Detected 1 5823 5823

Active Diagnostic Codes - Machine Control D3K (FFF01154)


Code Description
133- 5 Transmission Pilot Pressure Supply Solenoid : Current Below Normal
811- 9 Gauge Cluster #1 : Abnormal Update Rate
2500- 3 Powertrain Speed Range Control Position Sensor : Voltage Above Normal
2532- 3 Operator Gear Ratio Set/Recall Switch Position : Voltage Above Normal

Active Event Codes - Machine Control D3K (FFF01154)


Code Description
No Active
Event Codes

Current Totals - Machine Control D3K (FFF01154)


Description Value Unit
Total Operating Hours 6927 hours
Total Distance 7514.74 Miles
Total Forward Distance 5405.74 Miles
Total Reverse Distance 2108.93 Miles

Configuration - Machine Control D3K (FFF01154)


Description Value Unit
Product ID FFF01154
Equipment ID D3K
Low System Battery Voltage Elevated Idle Enabled
Engine Warm Up Elevated Idle Feature Enabled
Enable Status
Information Units Configuration Metric
Fuel Efficient Reverse Default Setting Off
AccuGrade System Installation Status Not Installed
AccuGrade Enable Configuration Automatic Detection
Monitoring Mode Derates Enabled
Maximum Forward Ground Speed 5.6 mph
Maximum Reverse Ground Speed 6.2 mph
Default Gear Ratio 0.822
Parking Brake Lockout Configuration Not Locked Out
Machine Response Rate Setting Medium
Steering Response Rate Setting Medium
Steering Modulation Setting Medium
Brake Pedal Deceleration Function Enable Enabled
Status
Stable Blade Control Installation Status Not Installed
Blade Control Response Configuration Standard
Rear Attachment Installation Status Not Installed
Auxiliary Valve #2 Installation Status Not Installed
Auxiliary Valve #1 Float Installation Status Not Installed
Auxiliary Valve #2 Float Installation Status Not Installed
Auxiliary Valve #1 Port A Solenoid 1.600 Amps
Maximum Current
Auxiliary Valve #1 Port B Solenoid 1.600 Amps
Maximum Current
Auxiliary Valve #2 Port A Solenoid 1.600 Amps
Maximum Current
Auxiliary Valve #2 Port B Solenoid 1.600 Amps
Maximum Current
Winch Spool In Solenoid Maximum Current 1.600 Amps
Winch Spool Out Solenoid Maximum 1.600 Amps
Current
Tilt Right Solenoid Maximum Current 1.500 Amps
Tilt Left Solenoid Maximum Current 1.500 Amps
Blade Lower Solenoid Maximum Current 1.300 Amps
Blade Raise Solenoid Maximum Current 1.400 Amps
Blade Angle Right Solenoid Maximum 1.600 Amps
Current
Blade Angle Left Solenoid Maximum 1.600 Amps
Current
Advanced Machine Security System Not Installed
Installation Status

Calibration Status - Machine Control D3K (FFF01154)


Calibration Status Last Successful Completion
Winch Spool Out Solenoid Not Calibrated Never Successfully Calibrated
Winch Spool In Solenoid Not Calibrated Never Successfully Calibrated
Transmission Drive Pump Success 0.1 hours
Pressure Override Calibration
Reverse Pump Solenoid Success 0.1 hours
Calibration
Forward Pump and Motor Success 0.1 hours
Solenoid Calibration
Service Brake Pedal Calibration Success 0.0 hours
Joystick Left/Right Calibration Success 0.0 hours
Joystick Forward/Reverse Success 0.0 hours
Calibration
Powertrain Speed Range Success 0.0 hours
Control Rocker Calibration
Blade Control Handle Thumb Success 0.0 hours
Rocker
Blade Control Lever Success 0.0 hours
Auxiliary Valve #2 Port B Not Calibrated Never Successfully Calibrated
Solenoid
Auxiliary Valve #2 Port A Not Calibrated Never Successfully Calibrated
Solenoid
Auxiliary Lever #2 Calibration Not Calibrated Never Successfully Calibrated
Auxiliary Control Lever Not Calibrated Never Successfully Calibrated
Auxiliary Valve #1 Port B Not Calibrated Never Successfully Calibrated
Solenoid
Auxiliary Valve #1 Port A Not Calibrated Never Successfully Calibrated
Solenoid
Blade Angle Left Solenoid Not Calibrated Never Successfully Calibrated
Blade Angle Right Solenoid Not Calibrated Never Successfully Calibrated
Blade Tilt Left Solenoid Success 0.4 hours
Blade Tilt Right Solenoid Success 0.4 hours
Blade Lower Solenoid Success 0.4 hours
Blade Raise Solenoid Success 0.4 hours
Product Link (FFF01154)
Parameter Value
Machine Serial Number FFF01154
Dealer Identification Code J210
DBS Machine Make Code AA
ECM Serial Number 2563B186LQ
Wireless Transmission Device Serial Number DQCAT0143787
Software Group Part Number 4345158-00
Software Group Release Date JAN2013
Software Group Description PL-300 3.1.4 PROD

Logged Diagnostic Codes [Diagnostic Clock = 6926.6064 hours] - Product Link (FFF01154)
Code Description Occ. First Last
No Logged
Diagnostic
Codes

Logged Event Codes [Diagnostic Clock = 6926.6064 hours] - Product Link (FFF01154)
Code Description Occ. First Last
E2133 (2) Operation Time Boundary Violation 127 5116 6926

Active Diagnostic Codes - Product Link (FFF01154)


Code Description
No Active
Diagnostic
Codes

Active Event Codes - Product Link (FFF01154)


Code Description
No Active
Event Codes

Configuration - Product Link (FFF01154)


Description Value Unit
Maintenance Mode Off
Machine Serial Number FFF01154
DBS Machine Make Code AA
Dealer Identification Code J210
Registration E-Mail Address Username PLSUPPORT
Registration E-Mail Address Domain TRAKINDO.CO.ID
Event/Diagnostic Report Interval (SMU) 4 hours
Event/Diagnostic Message Interval (RT) 168 hours
Report Start Time 12/31/1984 4:00 PM
Warning Level 3 Report Configuration Report Immediately
Warning Level 2 Report Configuration Report Immediately
Warning Level 1 Report Configuration Report at Next Scheduled
Diagnostic Report Configuration Report at Next Scheduled
Operating Hours Report Configuration On
Number of Daily Machine Location 4
Messages Configuration
Position Report Minimum Location Change 0 feet
Fuel Consumed Report Configuration On
Global Gram Enable Status Disabled
GPS Fix Validity Time Duration 60.0 min
Preferred Wireless Service Configuration Satellite Premium #2
Digital Sensor Input #1 Type Configuration Not Installed
Digital Input #1 Monitoring Condition All Conditions
Digital Sensor Input #1 Description DIGITAL INPUT 1
Digital Sensor Input #1 Delay Time 30.0 sec
Digital Sensor Input #2 Type Configuration Not Installed
Digital Input #2 Monitoring Condition All Conditions
Digital Sensor Input #2 Description DIGITAL INPUT 2
Digital Sensor Input #2 Delay Time 30.0 sec
Digital Sensor Input #3 Type Configuration Not Installed
Digital Input #3 Monitoring Condition All Conditions
Digital Sensor Input #3 Description DIGITAL INPUT 3
Digital Sensor Input #3 Delay Time 30.0 sec
Digital Sensor Input #4 Type Configuration Not Installed
Digital Input #4 Monitoring Condition All Conditions
Digital Sensor Input #4 Description DIGITAL INPUT 4
Digital Sensor Input #4 Delay Time 30.0 sec
Embedded Communication Adapter Not Installed
Installation Status

C4.4 (C4E29419)
Parameter Value
Equipment ID D3K
Engine Serial Number C4E29419
ECM Serial Number 22637222MN
Software Group Part Number 3489182-00
Software Group Release Date MAY09
Software Group Description C4.4-CCR-A4E2

Logged Diagnostic Codes [Diagnostic Clock = 6926.5555 hours] - C4.4 (C4E29419)


Code Description Occ. First Last
No Logged
Diagnostic
Codes

Logged Event Codes [Diagnostic Clock = 6926.5555 hours] - C4.4 (C4E29419)


Code Description Occ. First Last
E360 (2) Low Engine Oil Pressure 1 5115 5115
E361 (2) High Engine Coolant Temperature 2 4079 4079
E362 (1) Engine Overspeed 10 4149 4291
E398 (2) Low Fuel Rail Pressure 14 6925 6926
Active Diagnostic Codes - C4.4 (C4E29419)
Code Description
No Active
Diagnostic
Codes

Active Event Codes - C4.4 (C4E29419)


Code Description
No Active
Event Codes

Current Totals - C4.4 (C4E29419)


Description Value Unit
Total Fuel 12863 gal
Ether Usage Unavailable gal
Total Idle Time 1498:45 hours
Total Idle Fuel 818 gal
Total Operating Hours 6927 hours
Percentage Idle Time 21.63 %
Average Fuel Rate 1.86 gal/h

Configuration - C4.4 (C4E29419)


Description Value Unit
Equipment ID D3K
Engine Serial Number C4E29419
ECM Serial Number 22637222MN
Software Group Part Number 3489182-00
Software Group Description C4.4-CCR-A4E2
Rating Number 1
Ether Solenoid Configuration Not Installed
Monitoring Mode Shutdowns Disabled
Monitoring Mode Derates Enabled
User Defined Switch Installation Status Not Installed
FLS 13
FTS -19
Engine Security System Status Unavailable
Total Tattletale 1

Injector Trim Calibration - C4.4 (C4E29419)


Injector Serial Number File Version
Injector1 000000002S02337773FE 1
Injector2 000000002S02337721B1 1
Injector3 000000002S023375510C 1
Injector4 000000002S02337777E2 1

Monitoring System - C4.4 (C4E29419)


Description State Trip Point Delay Time
Engine Overspeed
Least Severe (1) Always On 3000 rpm 0 sec
High Engine Coolant
Temperature
Least Severe (1) Always On 235 Deg F 10 sec
Moderate Severity (2) Always On 237 Deg F 10 sec
Most Severe (3) Always On 244 Deg F 10 sec
High Engine Inlet Air
Temperature
Least Severe (1) Always On 329.0 Deg F 8 sec
Moderate Severity (2) Always On 338.0 Deg F 8 sec
High Hydraulic Oil
Temperature
Moderate Severity (2) Always On 192 Deg F 20 sec
Most Severe (3) Always On 196 Deg F 20 sec
Low Engine Oil
Pressure
Least Severe (1) Always On None 8 sec
Moderate Severity (2) Always On None 8 sec
Most Severe (3) Always On None 4 sec

You might also like