Scribd Logo
Upload

Welcome to Scribd!

  • 164 views

    Workplace Inspection Checklist - Workshop Environment

    Uploaded by

    justine8448
    This document provides a checklist for inspecting a workshop environment. The checklist covers equipment, electrical safety, work environment, guarding, emergency preparedness, and any necessary actions. Regular inspections are important for identifying hazards so that corrective actions can be tracked and completed to ensure workplace safety. The inspector should verify that equipment is in good working order, electrical items are properly maintained and tagged, the work area is clean and well-lit with adequate space, hazards are properly guarded, emergency exits are clear with necessary supplies accessible, and any identified issues are assigned action items and tracked in the RiskWare system.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Workplace Inspection Checklist - Workshop Environment

    Uploaded by

    justine8448
    164 views2 pages
    This document provides a checklist for inspecting a workshop environment. The checklist covers equipment, electrical safety, work environment, guarding, emergency preparedness, and any necessary actions. Regular inspections are important for identifying hazards so that corrective actions can be tracked and completed to ensure workplace safety. The inspector should verify that equipment is in good working order, electrical items are properly maintained and tagged, the work area is clean and well-lit with adequate space, hazards are properly guarded, emergency exits are clear with necessary supplies accessible, and any identified issues are assigned action items and tracked in the RiskWare system.

    Original Description:

    checklist

    Original Title

    Workplace_Inspection_Checklist_Workshop

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a checklist for inspecting a workshop environment. The checklist covers equipment, electrical safety, work environment, guarding, emergency preparedness, and any necessary actions. Regular inspections are important for identifying hazards so that corrective actions can be tracked and completed to ensure workplace safety. The inspector should verify that equipment is in good working order, electrical items are properly maintained and tagged, the work area is clean and well-lit with adequate space, hazards are properly guarded, emergency exits are clear with necessary supplies accessible, and any identified issues are assigned action items and tracked in the RiskWare system.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    164 views2 pages

    Workplace Inspection Checklist - Workshop Environment

    Uploaded by

    justine8448
    This document provides a checklist for inspecting a workshop environment. The checklist covers equipment, electrical safety, work environment, guarding, emergency preparedness, and any necessary actions. Regular inspections are important for identifying hazards so that corrective actions can be tracked and completed to ensure workplace safety. The inspector should verify that equipment is in good working order, electrical items are properly maintained and tagged, the work area is clean and well-lit with adequate space, hazards are properly guarded, emergency exits are clear with necessary supplies accessible, and any identified issues are assigned action items and tracked in the RiskWare system.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    WORKPLACE INSPECTION CHECKLIST – WORKSHOP ENVIRONMENT

    Use this checklist to assist you when completing routine workplace inspections of your workshop environment.
    Carrying out regular workplace inspections is one way to identify workplace hazards. Any serious or ongoing
    hazards should be reported via RiskWare to ensure that appropriate corrective actions are tracked and completed .

    Faculty/School/Administrative Unit: Date:

    Area inspected: Inspected by:

    1. Equipment

    Inspection item Yes No N/A Notes


    Cranes and hoists available to reduce lifting where
    possible
    Minimum load bearing capacity clearly marked on
    cranes, hoists and gantries
    Slings and shackles are in good condition e.g. not
    damaged, stretched, cracks, deep rust
    Hand tools are in good condition
    “LED/frosted” light globes fitted in machinery
    Oxyacetylene cylinders used and stored secured in
    upright position
    Flashback arrestors fitted to all oxyacetylene
    equipment
    Pressure gauges on oxyacetylene cylinders in
    working order
    Bench grinder wheels regularly dressed and tool
    rests correctly adjusted
    Compressed air has fixed guarding around the
    moving parts and sign posted
    Operational controls clearly identified and within
    reach of operators
    Emergency stop buttons clearly identified and
    coloured RED
    Certificate of Registration for “registrable plant” is
    made available and up-to-date

    2. Electrical Safety

    Inspection item Yes No N/A Notes


    Double adaptors and power boards are not used
    Power tools and extension cords regularly inspected,
    tested and tagged
    Electrical switches and power points are in good
    condition

    3. Work Environment

    Inspection item Yes No N/A Notes


    Workshop is locked when unattended
    Appropriate signage “AUTHORISED ENTRY ONLY”
    posted at entrance
    PPE signage in place where required to be worn
    Storage of PPE is appropriate
    Machinery is kept clean after use
    Sufficient clearance provided around and between
    WORKPLACE INSPECTION CHECKLIST – WORKSHOP ENVIRONMENT

    machinery to allow for safe operations, set up,


    servicing, material handling and waste removal
    Areas are adequately lit and well ventilated
    Floor is not slippery or uneven
    Combustible materials stored away from sparks and
    flames
    Noise measurements associated with machinery
    undertaken and appropriate measures in place
    All hazardous substances are identified, labelled
    and stored appropriately

    4. Guarding

    Inspection item Yes No N/A Notes


    Effective guarding provided as a barrier from
    hazards such as nip-points, rotating parts, flying
    chips, pulleys, moving chains, high pressure gas
    Splash guards mounted on machinery that uses
    coolant

    5. Emergency Preparedness

    Inspection item Yes No N/A Notes


    Exit sign is posted and/or illuminated
    Exit paths and walkways are clear and free from
    obstructions
    Appropriate fire extinguishers accessible and sign
    posted
    First aid kits readily available
    An appropriate spill kit is available
    Safety shower/eyewash station is available –
    operational and tested weekly
    Emergency contacts sign posted

    6. Actions

    Action item When by Who by Status RiskWare


    reference

    Retain copies of your completed workplace inspection checklists for auditing purposes. Page 2

    You might also like