Scribd
Upload
609 views2 pages

LX-16A Data Sheet

The LX-16A is a high-performance servo unit that integrates a motor, gearbox, communication interface, and sensors. It is mainly used for robot joints and wheel drives. The serial communication makes wiring robots easier and more delicate. The servo provides position, temperature, and voltage feedback and can be controlled through serial commands.

Uploaded by

Miguel Alberto Dávila Sacoto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
609 views2 pages

LX-16A Data Sheet

The LX-16A is a high-performance servo unit that integrates a motor, gearbox, communication interface, and sensors. It is mainly used for robot joints and wheel drives. The serial communication makes wiring robots easier and more delicate. The servo provides position, temperature, and voltage feedback and can be controlled through serial commands.

Uploaded by

Miguel Alberto Dávila Sacoto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

The LX-16A serial bus intelligent servo is a high-performance servo unit, which integrates the

motor, reduction gearbox, serial bus communication interface and sensors.


Mainly used for bionic robot joints, wheel drive and so on. The servo control is simple and
convenient, and can give good feedback about position, temperature and voltage data.The serial
servo makes robot wiring much more easier, so that the robot is more delicate and attractive.

Model Package Content


1 x Bus Servo
2 x Servo Horn
1 x Main Screw
LX-16A
1 x Deputy Screw
15 M2*4 Self-Tapping Screw
1 x 20cm Servo Wire
Product Parameters：

Net weight 52 g(1.8oz)


Product size 1.78in*0.97in*1.38in
Rotation speed 0.18sec/60degree(4.8v)
0.15sec/60degree(6v)
Servo accuracy 0.24°
Torque 17kg.cm(236oz.in)@6V; 19.5kg.cm(270.8oz.in)@7.4V
Servo ID 0~253(user setting, the default is 1)
Storage users’ parameter setting after support
power off
Read back function Support(Require TTL/USB debug board)
Control method Serial command
Communication baud rate 115200
Parameter feedback temperature/voltage/position
Apply to all kinds of Bionic robot joints

Technical Support

If there is anything that you do not understand, please check the instructions or
the accompanying video tutorial, if the problem still can not be solved, please
feel free to contact us by email at [email protected]

Please visit the following link or scan the QR codes to get related instructions，
PC software and video tutorials.

Get instructions,
Get video tutorial(Youtube)
software(Dropbox)

Link http://bit.ly/2rJshh6 http://bit.ly/2t4MNwS

QR code

You might also like