Scribd Logo
Upload

Welcome to Scribd!

  • 77 views

    Model 2-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve (740 Series)

    Uploaded by

    Anurag Jain
    This document provides information about a 2-way, direct-acting solenoid-operated poppet valve from Sun Hydraulics. The valve is available in normally open or normally closed configurations and has a capacity of 10 gpm. It has low leakage rates of less than 10 drops/min at 5000 psi and features options for manual override controls. The document provides technical specifications, configuration options, and notes about performance and related models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Model 2-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve (740 Series)

    Uploaded by

    Anurag Jain
    77 views3 pages
    This document provides information about a 2-way, direct-acting solenoid-operated poppet valve from Sun Hydraulics. The valve is available in normally open or normally closed configurations and has a capacity of 10 gpm. It has low leakage rates of less than 10 drops/min at 5000 psi and features options for manual override controls. The document provides technical specifications, configuration options, and notes about performance and related models.

    Original Description:

    Sun hydraulics

    Original Title

    DTDF_full_en_us_a4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a 2-way, direct-acting solenoid-operated poppet valve from Sun Hydraulics. The valve is available in normally open or normally closed configurations and has a capacity of 10 gpm. It has low leakage rates of less than 10 drops/min at 5000 psi and features options for manual override controls. The document provides technical specifications, configuration options, and notes about performance and related models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    77 views3 pages

    Model 2-Way, Direct-Acting, Solenoid-Operated Directional Blocking Poppet Valve (740 Series)

    Uploaded by

    Anurag Jain
    This document provides information about a 2-way, direct-acting solenoid-operated poppet valve from Sun Hydraulics. The valve is available in normally open or normally closed configurations and has a capacity of 10 gpm. It has low leakage rates of less than 10 drops/min at 5000 psi and features options for manual override controls. The document provides technical specifications, configuration options, and notes about performance and related models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    MODEL 2-way, direct-acting, solenoid-operated directional blocking poppet valve (740

    DTDF Series)
    SERIES 1 / CAPACITY: 10 gpm / CAVITY: T-13A
    sunhydraulics.com/model/DTDF

    X-Control, C-Poppet X-Control, H-Poppet

    D-Control, C-Poppet D-Control, H-Poppet

    This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. The valve is
    L-Control, C-Poppet L-Control, H-Poppet available in either a normally open or normally closed configuration and is designed to be used with 740 and 747
    Series coils.

    Due to the poppet style construction, this valve has extremely low leakage.

    TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

    M-Control, C-Poppet M-Control, H-Poppet Cavity T-13A


    Series 1
    Capacity 10 gpm
    Maximum Operating Pressure 5000 psi
    Maximum Valve Leakage at 110 SUS (24 cSt) 10 drops/min.@5000 psi
    T-Control, C-Poppet T-Control, H-Poppet Manual Override Force Requirement 5 lbs/1000 psi @ Port 1
    Manual Override Stroke .10 in.
    Response Time - Typical 50 ms
    Switching Frequency 15,000 max. cycles/hr
    Solenoid Tube Diameter .63 in.
    Valve Hex Size 7/8 in.
    Valve Installation Torque 30 - 35 lbf ft
    Seal kit - Cartridge Buna: 990413007
    Seal kit - Cartridge Polyurethane: 990413002
    Seal kit - Cartridge Viton: 990413006
    Model Weight 0.52 lb.

    NOTES Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances.

    CONFIGURATION OPTIONS Model Code Example: DTDFXCN


    CONTROL (X) POPPET CONFIGURATION (C) SEAL MATERIAL (N) COIL *
    X No Manual Override C Normally Closed N Buna-N No coil
    D Twist/Lock (Dual) Manual Override H Normally Open E EPDM * Additional coil options are available
    L Twist/Lock (Detent) Manual Override V Viton
    M Manual Override
    T Twist (Momentary) Manual Override

    c 2020 Sun Hydraulics


    1 of 3
    TECHNICAL FEATURES
    The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
    This valve is direct actuated and requires no minimum hydraulic pressure for operation.
    This cartridge has an option for manual override. See the CONFIGURATION section.
    Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage
    the seals.
    All configurations of this valve include zinc-nickel plating as standard for 1000-hour salt fog protection.
    Coil connector options offer ratings up to IP69K. See individual coil product pages for details.
    This cartridge utilizes both 740 Series high-power and 747 Series hazardous location coils.
    This valve is suitable for load holding applications when using the Normally Closed option. In the event of power failure, the valve will spring closed.
    Valves exhibit extremely low leakage rates; less than 10 drops/min. @ 5000 psi (0,7 cc/min @ 350 bar).
    On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control
    assemblies have a mechanical life expectancy of approximately 7,000 cycles.
    A FULL DATA SHEET is available for this model using the link at the top of the page.
    This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a
    factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes
    that will affect the function of the cartridge.
    A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
    The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
    Coils can be mounted on the tube in either direction.
    Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
    machining variations.

    PERFORMANCE CURVES

    c 2020 Sun Hydraulics


    2 of 3
    RELATED MODELS

    c 2020 Sun Hydraulics


    3 of 3

    You might also like