Global LCD Panel Exchange Center www.panelook.

com
MT3151A05-2 Product Specification

MODEL: MT3151A05-2
Ver. 2.1
Date: 8.Jun.2012

Customer’s Approval CSOT

Signature Date Approved By Product Director Date

Name: Richard Lung
Signature:

Reviewed By PM Manager Date

Name: Aaron Tu
Signature:

Reviewed By Project Leader Date

Name: Richard Lung
Signature:

Reviewed By PM Date
Name: Teng Ma
Signature:

The copyright belongs to Shenzhen China Star 1 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

Contents

Revision History ................................................................................................................................................ 4

1. General Description ....................................................................................................................................... 5
1.1 Product Features .................................................................................................................................. 5
1.2 Overview .............................................................................................................................................. 5
1.3 General Information ............................................................................................................................. 5
2. Absolute Maximum Ratings .......................................................................................................................... 6
2.1 Absolute Maximum Ratings (TA = 25 ± 2 °C) .................................................................................... 6
2.2 Environment Requirement ................................................................................................................... 6
2.3 Package Storage ................................................................................................................................... 7
3. Electrical Specification .................................................................................................................................. 8
3.1 Electrical Characteristics ..................................................................................................................... 8
3.1.1 Power Consumption (TA = 25 ± 2 ºC) ...................................................................................... 8
3.1.2 LVDS Characteristics................................................................................................................ 9
3.2 Backlight Unit .................................................................................................................................... 10
3.2.1 LED Light Bar Characteristics (TA = 25 ± 2 ºC).................................................................... 10
3.2.2 LED Light Bar Output Connector Pin Definition ................................................................... 10
4. Electrical Block Diagram............................................................................................................................. 11
5. Input Terminal Pin Assignment ................................................................................................................... 12
5.1 TFT LCD Module .............................................................................................................................. 12
5.2 Block Diagram of Interface ............................................................................................................... 14
5.3 LVDS Interface .................................................................................................................................. 14
5.3.1 VESA Format (SELLVDS = L or Open) ................................................................................ 14
5.3.2 JEIDA Format (SELLVDS = H) ............................................................................................. 14
5.4 Color Data Input Assignment ............................................................................................................ 15
6. Interface Timing ........................................................................................................................................... 16
6.1 Timing Table (DE Only Mode) .......................................................................................................... 16
6.2 Power On/Off Sequence .................................................................................................................... 17
7. Optical Characteristics ................................................................................................................................. 18
7.1 Measurement Conditions ................................................................................................................... 18
7.2 Optical Specifications ........................................................................................................................ 19
8. Mechanical Characteristics .......................................................................................................................... 23
8.1 Mechanical Specification........................................................................................................................... 23
8.2 Packing............................................................................................................................................... 25
8.2.1 Packing Specifications ............................................................................................................ 25
8.2.2 Packing Method ...................................................................................................................... 25

The copyright belongs to Shenzhen China Star 2 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

9. Definition of Labels ..................................................................................................................................... 26

9.1 Module Label ..................................................................................................................................... 26
9.2 Carton Label ...................................................................................................................................... 26
9.3 Pallet Label ........................................................................................................................................ 27
10. Precautions ................................................................................................................................................. 28
10.1 Assembly and Handling Precautions ............................................................................................... 28
10.2 Safety Precautions............................................................................................................................ 28

The copyright belongs to Shenzhen China Star 3 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

Revision History
Version Date Page (New) Section Description Revision by
Ver. 1.1 27.Mar.2012 28 10 Tentative Specification. Teng Ma
Ver. 2.1 8.Jun.2012 28 10 Approval Specification. Teng Ma
16 6.1 Update Timing Table. Teng Ma
19 7.2 Update Optical Specifications. Teng Ma
21 7.2 Update (5) Definition of uniformity of white screen. Teng Ma
25 8.2.1 Update packing specification. Teng Ma
25 8.2.2 Update packing method. Teng Ma

The copyright belongs to Shenzhen China Star 4 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

1. General Description
1.1 Product Features
- HD Resolution (1366 x 768)
- Brightness: 300 cd/m²
- Very High Contrast Ratio: 3000:1
- Fast Response Time
- Color Saturation: 62% NTSC
- Ultra Wide Viewing Angle: 178° (H)/178° (V) (CR t 10)
- Low Power Consumption: Typ. 30 W
- DE (Data Enable) Mode
- LVDS (Low Voltage Differential Signaling) Interface
- RoHS Compliance

1.2 Overview
MT3151A05-2 is a diagonal 31.5” color active matrix LCD module with edge LED backlight and 1ch-LVDS interface.
This module is a transmissive type display operating in the normally black mode. It supports 1366 x 768 HD resolution and
can display up to 16.7M colors (8-bit). Each pixel is divided into Red, Green and Blue sub-pixels which are arranged in
horizontal stripe. The backlight is without converter.
This module dedicates for LCD TV products and provides excellent performance which includes high contrast ratio, ultra
wide viewing angle, low power consumption and high color depth.

1.3 General Information

Item Specification Unit Note

Active Area 697.685 (H) x 392.256 (V) mm

Bezel Opening Area 705.4 (H) x 400.0 (V) mm

Outline Dimension 735.4 (H) x 433.0 (V) x 10.8 (D) mm D: From Bezel to Rear (Thinner)

Weight 4.5 kg Max.

Driving Scheme a-Si TFT Active Matrix -

Number of Pixels 1366 x 768 pixel

Pixel Pitch (Sub Pixel) 0.51075 (H) x 0.17025 (V) mm

Pixel Arrangement RGB Horizontal Stripe -

Display Colors 16.7 M color 8-bit

Display Mode Transmissive Mode, Normally Black -

Surface Treatment Anti-glare, Haze 2%, Hard Coating (3H) -

Luminance of White 300 cd/m² Center Point, Typ.

The copyright belongs to Shenzhen China Star 5 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

2. Absolute Maximum Ratings

2.1 Absolute Maximum Ratings (TA = 25 ± 2 °C)
The followings are maximum values which, if exceeded, may cause damage to the unit.

Value
Item Symbol Unit
Min. Max.

Power Supply Voltage VCC - 0.3 13.5 V

Input Signal Voltage VIN - 0.3 3.6 V

Light Bar Voltage Vw 132.0 167.2 V

2.2 Environment Requirement

(1) Temperature and relative humidity range are shown as below.

Relative Humidity (%RH) 100

90 39 ºC, 90%
80

60

Operating Range
40

20
10 Storage Range

-40 -20 0 20 40 60 80

Temperature (ºC)

(a) 90%RH maximum (TA < 39 ºC).

(b) Wet-bulb temperature should be 39 ºC maximum (TA > 39 ºC).
(c) No condensation.
(2) The storage temperature is between - 20 ºC to 60 ºC, and the operating ambient temperature is between 0 ºC to 50 ºC.
The maximum operating temperature is based on the test condition that the surface temperature of display area is less than
or equal to 65 ºC with LCD module in a temperature controlled chamber alone. Thermal management should be considered
in final product design to prevent the surface temperature of display area from being over 65 ºC. The range of operating
temperature may degrade in case of improper thermal management in the end product design.
(3) The TFT module including glass should be avoided any shock or vibration.
While testing shock and vibration, the fixture holding the module should be assured to be hard and rigid enough to prevent
the module twisted or bent by the fixture. The test conditions should be less than:
Shock (Non-operating): 35 G, 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.

The copyright belongs to Shenzhen China Star 6 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

Vibration (Non-operating): Random 1.0 Grms, 10 ~ 200 Hz, 10 min, 1 time for each X, Y, Z.
2.3 Package Storage
When storing modules as spares for a long time, please follow the precaution instructions:
(1) Do not store the module in high temperature and high humidity for a long time. It is highly recommended to store the
module with temperature from 0 ºC to 35 ºC in normal humidity.
(2) The module shall be stored in a dark area and avoided to be exposed in direct sunlight or fluorescent light.

The copyright belongs to Shenzhen China Star 7 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

3. Electrical Specification
3.1 Electrical Characteristics
3.1.1 Power Consumption (TA = 25 ± 2 ºC)

Value
Parameter Symbol Unit Note
Min. Typ. Max.

Power Supply Voltage VCC 10.8 12.0 13.2 V (1)

Rush Current IRUSH - - 3.0 A (2)

White Pattern ICC - 0.2 0.3 A

Power Supply
Vertical Stripe ICC - 0.4 0.5 A (3)
Current
Black Pattern ICC - 0.2 0.3 A

Note:
(1) The ripple voltage should be controlled less than 10% of VCC.
(2) Measurement condition: VCC rising time = 470 μs.

VCC
VCC x 0.9

VCC x 0.1
GND
470 μs

Fig. 3.1 VCC rising time condition

(3) Measurement condition: VCC = 12 V, TA = 25 ± 2 ºC, F = 60 Hz. The test patterns are shown as below.
A. White Pattern B. Vertical Pattern

C. Black Pattern

Fig. 3.2 Test patterns

The copyright belongs to Shenzhen China Star 8 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

3.1.2 LVDS Characteristics

Value
Parameter Symbol Unit Note
Min. Typ. Max.
Differential Input High
VTH + 100.0 - - mV
Threshold Voltage
Differential Input Low
VTL - - - 100.0 mV
Threshold Voltage
LVDS Interface (1)
Common Input Voltage VCM 1.0 1.2 1.4 V

Differential Input Voltage |VID| 200.0 - 600.0 mV

Terminating Resistor RT - 100.0 - ohm

Input High Threshold Voltage VIH 2.7 - 3.3 V

CMOS Interface
Input Low Threshold Voltage VIL 0.0 - 0.6 V
Note:
(1) The LVDS input signal has been defined as follows:

VTH |VID|
VCM
VTL

GND

Fig. 3.3 LVDS input signal

The copyright belongs to Shenzhen China Star 9 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

3.2 Backlight Unit

3.2.1 LED Light Bar Characteristics (TA = 25 ± 2 ºC)
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Power Consumption PBL - 25.0 - W (1)
Light Bar Voltage Vw 132.0 150.0 167.2 V
Light Bar Current IL - 150.0 - mA (1)
Lifetime - 30000.0 - - Hrs (2)
Note:
(1) Dimming ratio = 100% (Max.) (TA = 25 ± 2 ºC).
(2) The Lifetime is defined as the time which luminance of the LED decays to 50% compared to the initial value, Operating
condition: Continuous operating at Ta = 25 ± 2 ºC, IL =150 mA.
3.2.2 LED Light Bar Output Connector Pin Definition
Light bar cable CN1: CI0113S0000 (Cvilux) or equivalent (see Note (1))

Pin No. Symbol Description Note

1 VLED+ Positive of LED String

2 NC For CSOT internal only (2)

3 VLED- Negative of LED String

Note:
(1) The direction of pin assignment is shown as below:

#1 #3
CN1

#1 CN1 #3

Fig. 3.4 Light bar cable connector direction sketch map

(2) For CSOT internal only, please let it open.

The copyright belongs to Shenzhen China Star 10 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

4. Electrical Block Diagram

Input Connector

Data

Scan Driver
VCC Timing TFT LCD Panel

Controller (1366 x 768 x 3)

DC/DC
Converter

GAMMA Data Driver

Voltage

X + C Board

Backlight
Cvilux: CI0103S0000(3pin)
Unit

The copyright belongs to Shenzhen China Star 11 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

5. Input Terminal Pin Assignment

5.1 TFT LCD Module
X + C Board CN1: 300B30-0000RA-M4 (Starconn) or equivalent (see Note (1))
Pin No. Symbol Description Note
1 VCC Power Supply ,+ 12 V DC Regulated
2 VCC Power Supply ,+ 12 V DC Regulated
3 VCC Power Supply ,+ 12 V DC Regulated
4 VCC Power Supply ,+ 12 V DC Regulated
5 GND Ground
6 GND Ground
7 GND Ground
8 GND Ground
9 LVDS SEL LVDS Data Format Selection (2)
10 NC For CSOT internal only (3)
11 GND Ground
12 LV1N0 1st Channel LVDS Data Input (0-)
13 LV1P0 1st Channel LVDS Data Input (0+)
14 GND Ground
15 LV1N1 1st Channel LVDS Data Input (1-)
16 LV1P1 1st Channel LVDS Data Input (1+)
17 GND Ground
18 LV1N2 1st Channel LVDS Data Input (2-)
19 LV1P2 1st Channel LVDS Data Input (2+)
20 GND Ground
21 LVCK1N 1st Channel LVDS Clock Input (-)
22 LVCK1P 1st Channel LVDS Clock Input (+)
23 GND Ground
24 LV1N3 1st Channel LVDS Data Input (3-)
25 LV1P3 1st Channel LVDS Data Input (3+)
26 GND Ground
27 NC For CSOT internal only (3)
28 NC For CSOT internal only (3)
29 NC For CSOT internal only (3)
30 GND Ground

The copyright belongs to Shenzhen China Star 12 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

Note:
(1) The direction of pin assignment is shown as below:

#1 # 30
CN1

#1 CN1 # 30

Fig. 5.1 LVDS connector direction sketch map

(2) High: connect to + 3.3 V ė JEIDA format; Low: connect to GND or Open ė VESA format.
(3) For CSOT internal only, please let it open.

The copyright belongs to Shenzhen China Star 13 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

5.2 Block Diagram of Interface

Connector Timing Controller

LV1N0
100Ω
LV1P0
LV1N1
100Ω
LV1P1
LV1N2
100Ω
LV1P2
LVCK1N
100Ω
LVCK1P
LV1N3
100Ω
LV1P3
Attention:
(1) LCD module uses a 100 ohms (Ω) resistor between positive and negative lines of each receiver input.
(2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line respectively.
5.3 LVDS Interface
5.3.1 VESA Format (SELLVDS = L or Open)

LVCK1 N/ LVCK1 P

LV1N0/ LV1P0 G0 R5 R4 R3 R2 R1 R0

LV1N1/ LV1P1 B1 B0 G5 G4 G3 G2 G1

LV1N2/ LV1P2 DE VS HS B5 B4 B3 B2

LV1N3/ LV1P3 RSVD B7 B6 G7 G6 R7 R6

5.3.2 JEIDA Format (SELLVDS = H)

LVCK1 N/ LVCK1 P

LV1N0/ LV1P0 G2 R7 R6 R5 R4 R3 R2

LV1N1/ LV1P1 B3 B2 G7 G6 G5 G4 G3

LV1N2/ LV1P2 DE VS HS B7 B6 B5 B4

LV1N3/ LV1P3 RSVD B1 B0 G1 G0 R1 R0

The copyright belongs to Shenzhen China Star 14 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

5.4 Color Data Input Assignment

The brightness of each primary color is based on the 8-bit gray scale data input for each color. The higher the binary input,
the brighter the color. The table below provides the assignment of the color versus.
Data Signal

Red Green Blue

Data Input Color
MSB LSB MSB LSB MSB LSB

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Basic Colors
Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Red (0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Red (1) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Gray Scale of : : : : : : : : : : : : : : : : : : : : : : : : :

Red : : : : : : : : : : : : : : : : : : : : : : : : :

Red (254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Red (255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Green (0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Green (1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0

Gray Scale of : : : : : : : : : : : : : : : : : : : : : : : : :

Green : : : : : : : : : : : : : : : : : : : : : : : : :

Green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0

Green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

Blue (0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Blue (1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1

Gray Scale of : : : : : : : : : : : : : : : : : : : : : : : : :

Blue : : : : : : : : : : : : : : : : : : : : : : : : :

Blue (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0

Blue (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

Attention:
0: Low level voltage; 1: High level voltage.

The copyright belongs to Shenzhen China Star 15 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

6. Interface Timing
6.1 Timing Table (DE Only Mode)
Signal Item Symbol Min. Typ. Max. Unit Note
FCLK
LVDS Clock Frequency 50.0 75.4 85.0 MHz
(= 1 / TCLK)
Frame Rate F 47.0 60.0 63.0 Hz

Vertical Frequency FV 43.0 48.0 53.0 KHz

Vertical
Total TV 784.0 806.0 1015.0 TH TV = TVD + TVB
Term
Display TVD 768.0 TH

Blank TVB 16.0 38.0 247.0 TH

Total TH 1460.0 1560.0 2000.0 TCLK TH = THD+ THB

Horizontal
Display THD 1366.0 TCLK
Term
Blank THB 94.0 194.0 634.0 TCLK
Attention:
(1) The module is operated in DE only mode, H sync and V sync input signal have no effect on normal operation.

TV

TVD TVB

DE
TH

DCLK

TCLK
THB THD
DE

DATA Valid Display Data

Fig. 6.1 Interface signal timing diagram

The copyright belongs to Shenzhen China Star 16 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

6.2 Power On/Off Sequence

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram below.

0.1 VCC 0.1 VCC

0V

T1 T3

T2 T4

LVDS & Option Signal Valid Data

0V
Power On Power Off

BLU On/Off
50% 50%
T5 T6

Fig. 6.2 Power on/off Sequence

Values
Parameter Unit
Min. Typ. Max.

T1 0.5 - 10.0 ms
T2 0.0 - - ms
T3 0.0 - - ms
T4 1000.0 - - ms
T5 500.0 - - ms
T6 100.0 - - ms
Attention:
(1) The supply voltage of the external system for the module input should follow the definition of VCC.
(2) Apply the light bar voltage within the LCD operation range. When the backlight turns on before the LCD operation or the
LCD turns off before the backlight turns off, the display may momentarily become abnormal screen.
(3) In case that VCC is in off level, please keep the level of input signals on the low or high impedance. If T2 < 0, that may
cause electrical overstress.
(4) T4 should be measured after the module has been fully discharged between power off and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.

The copyright belongs to Shenzhen China Star 17 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

7. Optical Characteristics
7.1 Measurement Conditions
The table below is the test condition of optical measurement.
Item Symbol Value Unit

Ambient Temperature TA 25 r 2 ºC

Ambient Humidity HA 50 r 10 % RH

LVDS Supply Voltage VCC 12 V

Driving Signal Refer to the typical value in Chapter 3: Electrical Specification

LED Driving Current IL 120 mA

Vertical Refresh Rate FR 60 Hz

To avoid abrupt temperature change during optical measurement, it’s suggested to warm up the LCD module more than 45
minutes after lighting the backlight and in the windless environment.
To measure the LCD module, it is suggested to set up the standard measurement system as Fig. 7.1. The measuring area S
should contain at least 500 pixels of the LCD module as illustrated in Fig. 7.2 (A means the area allocated to one pixel). In this
model, for example, the minimum measuring distance Z is 370 mm when T is 2 degree. Hence, 500 mm is the typical
measuring distance. This measuring condition is referred to 301-2H of VESA FPDM 2.0 about viewing distance, angle, and
angular field of view definition.

T
S = πr²
For Square
Z
T r

Fig. 7.1 The standard set-up system of measurement Fig. 7.2 The area S contains at least 500 pixels to be measured

S
N= ı 500pixels
A

N means the actual number of the pixels in the area S.

The copyright belongs to Shenzhen China Star 18 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

7.2 Optical Specifications

The table below of optical characteristics is measured by MINOLTA CS2000, MINOLTA CA310, ELDIM OPTI
Scope-SA and ELDIM EZ Contrast in dark room.
Item Symbol Condition Min. Typ. Max. Unit Note

Static Contrast Ratio CR 2400 3000 - - (1) (2)

Response Time TL - 6.5 12.0 ms (3)

Center Luminance LW 250 300 - cd/m2 (2) (4)

Uniformity of White Screen - 70 - - % (2) (5)

RX 0.613 -
Red TH = 0q, TV = 0q
RY 0.333 -
Normal direction at
GX 0.331 -
Green center point of the
Color GY Typ. 0.604 Typ. -
LCD Module (2) (6)
Chromaticity BX - 0.03 0.153 + 0.03 -
Blue
(CIE1931) BY 0.071 -

WX 0.274 -
White
WY 0.292 -

Color Gamut CG - 62 - % NTSC

TH+ 80 89 -
Horizontal
TH- 80 89 -
Viewing Angle CR t 10 Deg. (7)
TV+ 80 89 -
Vertical
TV- 80 89 -
Note:
(1) Definition of static contrast ratio (CR):
It’s necessary to switch off all the dynamic and dimming function when measuring the static contrast ratio.

CR-W
Static Contrast Ratio (CR) =
CR-D

CR-W is the luminance measured by LMD (light-measuring device) at the center point of the LCD module with
full-screen displaying white. The standard setup of measurement is illustrated in Fig. 7.3; CR-D is the luminance measured
by LMD at the center point of the LCD module with full-screen displaying black. The LMD in this item is CS2000.
(2) The LMD in the item could be a spectroradiometer such as (KONICA MINOLTA) CS2000, CS1000(TOPCON), SR-UL2
or the same level spectroradiometer. Other display color analyzer (KONICA MINOLTA) CA210, CA310 or (TOPCON)
BM-7 could be involved after being calibrated with a spectroradiometer on each stage of a product.

The copyright belongs to Shenzhen China Star 19 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

Black & White

LMD

LCD Module

Fig. 7.3 The standard setup of CR measurement

(3) Response time TL is defined as the average transition time in the response time matrix. The table below is the response
time matrix in which each element tX to Y is the transition time from luminance ratio X to Y. X and Y are two different
luminance ratios among 0%, 25%, 50%, 75%, and 100% luminance. The transition time tX to Y is defined as the time taken
from 10% to 90% of the luminance difference between X and Y (X < Y) as illustrated in Fig.7.4. When X > Y, the
definition of tX to Y is the time taken from 90% to 10% of the luminance difference between X and Y. The response time is
optimized on refresh rate Fr = 60Hz.

Measured Luminance Ratio of Previous Frame

Transition Time 0% 25% 50% 75% 100%

0%  t25% to 0% t50% to 0% t75% to 0% t100% to 0%

25% t0% to 25% t50% to 25% t75% to 25% t100% to 25%

Luminance
Ratio of 50% t0% to 50% t25% to 50% t75% to 50% t100% to 50%
Current Frame
75% t0% to 75% t25% to 75% t50% to 75% t100% to 75%

100% t0% to 100% t25% to 100% t50% to 100% t75% to 100%

tX to Y means the transition time from luminance ratio X to Y.

Luminance
e
Luminance
ttXX totoYY Y: 0%, 25%, 50%, 75%, 100%
100% Y: 0%, 25% 50%, 75%, 100%
100%
90%
90% Brighter state
Brighter State

Darker State
10%
10%
0% Darker state
0% X: 0%,
X: 0%,25% 50%,50%,
25%, 75%, 75%,
100% 100%
Time
Time
Fig. 7.4 The definition of tX to Y
All the transition time is measured at the center point of the LCD module by ELDIM OPTI Scope-SA.

The copyright belongs to Shenzhen China Star 20 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

(4) Definition of center luminance (LW):

The luminance is measured at the center point of the LCD module with full-screen displaying white. Fig. 7.5 shows the
standard setup of luminance measurement.

White

LMD

LCD Module

Fig. 7.5 The standard setup of luminance measurement

(5) Definition of uniformity of white screen:
The luminance Li (i from 1 to 5) is measured at the 5 points defined in Fig. 7.6. H and V indicate active area.
From the measured set of luminance values Li (i from 1 to 5), the minimum luminance is denoted as Lmin and the
maximum luminance is denoted as L max. . The uniformity of white screen is defined according to
Uniformity = L min / L max x 100%.

H
H/2
2
H/4 H/4

V/4
V/2
(1) (2)
V
(3)
(4) (5) V/4

Fig. 7.6 Symbol “ + ” defines the 5 measuring locations (1), (2), (3) ··· (5)
(6) Definition of color chromaticity:
Each chromaticity coordinates (x, y) are measured in CIE1931 color space when full-screen displaying primary color R, G,
B and white. The color gamut is defined as the fraction in percent of the area of the triangle bounded by R, G, B
coordinates and the area is defined by NTSC 1953 color standard in the CIE color space. Chromaticity coordinates are
measured by CS2000 and the standard setup of measurement is shown in Fig. 7.7.

The copyright belongs to Shenzhen China Star 21 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

Colors

LMD

LCD Module

Fig. 7.7 The standard setup of color chromaticity measurement

(7) Definition of viewing angle coordinate system (TH, TV):
The contrast ratio is measured at the center point of the LCD module. The viewing angles are defined at the angle that the
contrast ratio is larger than 10 at four directions relative to the perpendicular direction of the LCD module (two vertical
angles: up TV+ and down TV-; and two horizontal angles: right TH+ and left TH-) as illustrated in Fig. 7.8. The contrast ratio
is measured by ELDIM EZ Contrast.

TH+

TH- TV+

TV-
Z

Fig. 7.8 Viewing angle coordination system

The copyright belongs to Shenzhen China Star 22 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

8. Mechanical Characteristics
8.1 Mechanical Specification

The copyright belongs to Shenzhen China Star 23 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

The copyright belongs to Shenzhen China Star 24 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

8.2 Packing
8.2.1 Packing Specifications
Specification
Item
Quantity Dimension (mm) Weight (kg)
Net Weight: 102.00(Max.)
Packing Box 24 pcs / box 1140.00 (L) x 818.00 (W) x 505.00 (H)
Gross Weight: 110.80 (Max.)
Pallet 1 1150.00 (L) x 850.00 (W) x 120.00 (H) Net Weight:5.04

Stack Layer 2

Boxes per Pallet 2 boxes / pallet

Pallet after Packing 48 pcs / pallet 1150.00 (L) x 850.00 (W) x 1130.00(H) Gross Weight:227.00
8.2.2 Packing Method

Protector Film Masking Tape PE Bag

Pallet Earth Box Around Box B

Bottom Cushion (2pcs) Board (3pcs) LCD TV Module (24pcs)

Heaven Box Top Cushion (2pcs)

Carton Label (2pcs) PP Belt Carton Label (2pcs)

PE Sheet
PE Film

Pallet Label (2pcs)

Fig. 8.1 Packing method (protector film stick on the front of the LCD module)

The copyright belongs to Shenzhen China Star 25 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

9. Definition of Labels
9.1 Module Label

For RoHS compliant products, CSOT will add RoHS for identification.
Model Name: MT3151A05-2
Ver. X.X: Version, for example: 0.1, 0.2, … , 1.1, 1.2, …, 2.1, 2.2, …
WC (Week Code): XX XX

Week
Year
Year: 2010 = 10, 2011 = 11 … 2020 = 20, 2021 = 21…
Week: 01, 02, 03 …
Serial Number: XXXXXXXXXXXX XXXXXXXX

CSOT Internal Use

Panel ID

9.2 Carton Label

Serial Number: XXXX XX XXXXX XXXXX

CSOT Internal Use

Year, Month, Date
Model Version Code
CSOT Internal Use

The copyright belongs to Shenzhen China Star 26 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

Manufactured Date:
Year: 2010 = 10, 2011 = 11…2020 = 20, 2021 = 21…
Month: 1~9, A~C, for Jan. ~ Dec.
Date: 01~31, for 1st to 31st
Model Version Code: Version of product, for example: 01, 02, 11, 12…

9.3 Pallet Label

Model Name: MT3151A05-2

MT
Module Qty.: 48
Modu
Note:
V
Ver. X.X
X.X
Carton Qty.: 2

Made In China
Serial Number: XXX XX XXX XXXXX

CSOT Internal Use

Year, Month
Model Version Code
CSOT Internal Use

The copyright belongs to Shenzhen China Star 27 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com
MT3151A05-2 Product Specification

10. Precautions
10.1 Assembly and Handling Precautions
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) It is recommended to assemble or install a module into the user’s system in clean working areas. The dust and oil
may cause electrical short or damage the polarizer.
(3) Do not apply pressure or impulse to the module to prevent the damage to LCD panel and backlight.
(4) Always follow the correct power-on sequence. This can prevent the damage and latch-up to the LSI chips.
(5) Do not plug in or pull out the interface connector while the module is in operation.
(6) Do not disassemble the module.
(7) Use soft dry cloth without chemicals for cleaning because the surface of polarizer is very soft and easily be
scratched.
(8) Moisture can easily penetrate into the LCD module and may cause the damage during operation.
(9) High temperature or humidity may deteriorate the performance of the LCD module. Please store LCD modules in
the specified storage conditions.
(10) When ambient temperature is lower than 10 ºC, the display quality might be deteriorated. For example, the
response time will become slow, and the starting voltage of LED light bar will be higher than that in room
temperature.
10.2 Safety Precautions
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(2) After the module’s end of life, it is not harmful in case of normal operation and storage.

The copyright belongs to Shenzhen China Star 28 / 28 Ver. 2.1

Optoelectronics Technology Co., Ltd.
Any unauthorized use is prohibited.

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com