Scribd
Upload
70 views1 page

Simple Stresses and Strains Stress Strain Diagram - Ultimate Stress - Yield Stress

This document outlines the objectives and units of a course on Strength of Materials. The objectives are to learn fundamental concepts of stress, strain, and solid deformation; load transfer and induced stresses in beams; the effect of torsion on shafts and springs; and analysis of plane and space trusses. The course is divided into 5 units that cover topics such as stresses and strains, load transfer and stresses in beams, deflection of beams, torsion, and truss analysis. The units total 45 hours of instruction. Several textbooks are listed as references.

Uploaded by

ramamurthi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
70 views1 page

Simple Stresses and Strains Stress Strain Diagram - Ultimate Stress - Yield Stress

This document outlines the objectives and units of a course on Strength of Materials. The objectives are to learn fundamental concepts of stress, strain, and solid deformation; load transfer and induced stresses in beams; the effect of torsion on shafts and springs; and analysis of plane and space trusses. The course is divided into 5 units that cover topics such as stresses and strains, load transfer and stresses in beams, deflection of beams, torsion, and truss analysis. The units total 45 hours of instruction. Several textbooks are listed as references.

Uploaded by

ramamurthi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

19CE3501 STRENGTH OF MATERIALS – I LTPC 3003

OBJECTIVES:
1. To learn the fundamental concepts of Stress, Strain and deformation of solids.
2. To know the mechanism of load transfer in beams, the induced stress resultants and deformations.
3. To understand the effect of torsion on shafts and springs.
4. To analyze plane and space trusses
UNIT I STRESS, STRAIN AND DEFORMATION OF SOLIDS 9
Simple Stresses and strains - Elastic constants - Relationship between elastic constants – Stress Strain
Diagram - Ultimate Stress - Yield Stress - Deformation of axially loaded member - Composite Bars -
Thermal Stresses - State of Stress in two dimensions - Stresses on inclined planes - Principal Stresses
and Principal Planes Maximum shear stress
UNIT II TRANSFER OF LOADS AND STRESSES IN BEAMS 9
Types of loads, supports, beams concept of shearing force and bending moment – Relationship
between intensity of load, Shear Force and Bending moment - Shear Force and Bending Moment
Diagrams for Cantilever, simply supported and overhanging beams with concentrated load and
uniformly distributed load. Theory of Simple Bending - Stress Distribution due to bending moment
and shearing force
UNIT III DEFLECTION OF BEAMS 9
Elastic curve Governing differential equation - Double integration method - Macaulay's method -
Area moment method - conjugate beam method for computation of slope and deflection of
determinant beams.
UNIT IV TORSION 9
Theory of Torsion - Stresses and Deformations in Solid and Hollow Circular Shafts - combined
bending moment and torsion of shafts - Power transmitted to shaft - Shaft in series and parallel
-Closed and Open Coiled helical springs - springs in series and parallel.
UNIT V ANALYSIS OF TRUSSES 9
Determinate and indeterminate trusses - Analysis of pin jointed plane determinate trusses by method
of joints, method of sections and tension coefficient
TOTAL HOURS: 45
TEXT BOOK(S):
1. Rajput R.K. "Strength of Materials(Mechanics of Solids)", S.Chand&company Ltd., New Delhi,
2010.
2. Punmia.B.C., Ashok Kumar Jain and Arun Kumar Jain, SMTS I Strength of materials, Laxmi
publications. New Delhi, 2015
3. Bansal R.K. "Strength of Materials”, laxmi publications Pvt., Lid., New Delhi 2010.

REFERENCE BOOK(S):
1. Kazimi S.M.A, “Solid Mechanics”, Tata McGraw-Hill Publishing Co., New Delhi, 2003
2.William A .Nash, “Theory and Problems of Strength of Materials”, Schaum’s Outline
Series,TataMcGraw Hill Publishing company,2007.
3. PunmiaB.C."Theory of Structures"(SMTS) Vol 1&II, LaxmiPublishingPvt Ltd, New Delhi 2004
4. Rattan.S.S., "Strength of Materials", Tata McGraw Hill Education Pvt. Ltd., New Delhi,2011.

You might also like