SCA2100-D02

Data Sheet

SCA2100-D02 2-AXIS HIGH PERFORMANCE ACCELEROMETER WITH

DIGITAL SPI INTERFACE

Features Applications
• 3.3V supply voltage SCA2100-D02 is targeted to applications with high
• ±2 g measurement range stability requirements. Typical applications include
• 2-axis measurement XY directions • Hill Start Aid (HSA)
• ±30mg offset stability over temp range • Electronic Parking Brake (EPB)
• SPI digital interface • Roll Over detection
• Extensive self diagnostics features • Suspension control
• Size 7.6 x 3.3 x 8.6 mm (w x h x l) • Inclinometers
• Qualified according to AEC-Q100 standard • Motion and position measurements
• Package, pin-out and SPI protocol compatible
with VTI digital accelerometer product family
• RoHS compliant Dual Flat Lead (DFL) plastic
package suitable for lead free soldering process
and SMD mounting
• Proven capacitive 3D-MEMS technology

General Description
SCA2100-D02 is a high performance three axis accelerometer component based on VTI capacitive 3D-MEMS
technology. The component integrates high accuracy micromechanical acceleration sensing together with a flexible
SPI digital interface. Dual Flat Lead (DFL) housing guarantees reliable operation over product lifetime.

SCA2100-D02 is designed, manufactured and tested for high stability, reliability and quality requirements of
automotive applications. The accelerometer has extremely stable output over wide range of temperature, humidity and
vibration. The component is qualified against AEC-Q100 standard and has several advanced self diagnostics features.
The DFL housing is suitable for SMD mounting and the component is compatible with RoHS and ELV directives.

SCA2100-D02 is a part of VTI digital accelerometer family and fully compatible with single axis accelerometers
(SCA800 series) and other multi axis accelerometers (SCA2100 series and SCA3100 series).

VTI Technologies Oy 1/5

www.vti.fi Doc.nr. 82 682 00 C
 SCA2100-D02

Performance Characteristics
Vdd=3.3 V and ambient temperature unless otherwise specified.

Parameter Condition

Min Typ A) Max Units

Analog and digital Vdd 3.0 3.6 V
Current consumption Active mode 3 5 mA
Power down mode 0.12 mA
Measurement range Measurement axes (XY) -2 2 g
Operating temperature -40 125 °C
Offset total error B) Temperature range -40 ... +125 °C -70 70 mg
Offset calibration error C) @25 °C ±5°C -40 ±16 40 mg
Offset temperature drift Temperature range -40 ... +125 °C -30 D) ±18 E) 30 D) mg
Sensitivity 12 bit output 900 Count/g
Between ±3° 0.0637 °/Count
Total sensitivity error Temperature range -40 ... +125 °C -4 4 % FS
Sensitivity calibration error @25 °C ±5°C ±0.5 % FS
Sensitivity temperature drift Temperature range -40 ... +125 °C ±0.8 % FS
Linearity error +1g ... -1g range -20 20 mg
Cross-Axis sensitivity -3.5 ±2.5 +3.5 %
Zero acceleration output 2-complement 0 Counts
Amplitude response F) -3dB frequency 30 55 Hz
Noise 5 mg RMS
Power on setup time 0.1 s
Output data rate 2000 Hz
Output load 50 pF
SPI clock rate 8 MHz
ESD protection Human Body Model 2 kV
Charge Device Model 1 kV
Moisture sensitivity level IPC/JEDEC J-STD-020C, Level 3
Mechanical shock 20 000 g
ID register value Customer readable ID register (27hex) 82
A)
Typical ± values are ±3 sigma variation limits from validation test population.
B)
Includes offset deviation from 0g value including calibration error and drift over lifetime, temperature and
supply voltage.
C)
Includes offset deviation from 0g value including calibration error and drift over lifetime.
D)
Offset drift due to temperature. Value is a relative value and has not been centered to 0g. Error defined as maximum change
of offset in temperature range. Offset (max)-Offset Min). 100% tested in production.
E)
Biggest change of output from RT value due temperature.
F)
See figure 4.

Analog Lowpass Decimation Coordinate SCK

calibration Filter Mapping
C/V DE- SPI MISO
& ADC and
MUX Lowpass Decimation i/f
1:4 Calibration
Filter MOSI

Lowpass Decimation CSB

Filter

Lowpass Decimation
Filter

Oscillator Reference Non- Temperature Continuous Start-up

& Volatile sensor self test self test
clock Memory

Figure 1. SCA2100-D02 Block diagram

VTI Technologies Oy 2/5

www.vti.fi Doc. Nr. 82 682 00 C
 SCA2100-D02

Typical Performance characteristics

X axis Offset calibration error Y axis Offset calibration error

60 60
55 55
50 50
45 45
Percent of parts[%]

Percent of parts[%]
40 40
35 35
30 30
25 25
20 20
15 15
10 10
5 5
0 0
-25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35
Offset [mg] Offset [mg]

Temperature dependency of X axis offset X axis Offset drift at temperature range

o o
-40 C…+125 C
20
30
15
25
Percent of parts[%]

10

5 20
Offset[mg]

+3 sigma
0 Average 15
-45 -20 5 30 55 80 105 130 -3 sigma
-5
10
-10
5
-15
0
-20 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30
Tem p [ oC] Offset drift [mg]

Temperature dependency of Y axis offset Y axis Offset drift at temperature range

o o
-40 C…+125 C
20 30
15
25
10
Percent of parts[%]

20
5
Offset[mg]

+3 sigma
0 Average 15
-45 -20 5 30 55 80 105 130 -3 sigma
-5
10
-10
5
-15

-20 0
-30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30
Tem p [ oC]
Offset drift [mg]

X axis Sensitivity at 25 C
o X axis Sensitivity drift at temperature range
o o
-40 C…+125 C
60
55 50
50 45
Percent of parts[%]

45 40
40 35
Percent of parts[%]

35 30
30 25
25
20
20
15 15
10 10
5 5
0 0
893 894 895 896 897 898 899 900 901 902 903 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 0.1 0.2
Sensitivity [LSB/g] Sensitivity error [% FS]

VTI Technologies Oy 3/5

www.vti.fi Doc. Nr. 82 682 00 C
 SCA2100-D02

o Y axis Sensitivity drift at temperature range

Y axis Sensitivity at 25 C
o o
-40 C…+125 C
60
55 50
50 45
Percent of parts[%]

45 40

Percent of parts[%]
40 35
35 30
30
25
25
20 20
15 15
10 10
5 5
0 0
893 894 895 896 897 898 899 900 901 902 903 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 0.1 0.2
Sensitivity [LSB/g] Sensitivity error [% FS]

Measument directions

Figure 2. Accelerometer measuring directions

Housing dimensions

Figure 3. Housing dimensions

VTI Technologies Oy 4/5

www.vti.fi Doc. Nr. 82 682 00 C
 SCA2100-D02

Frequency response

Figure 4. Frequency response curves

Contact Information
Finland Germany
USA
(head office) VTI Technologies Oy
VTI Technologies, Inc.
VTI Technologies Oy Branch Office Frankfurt
One Parklane Blvd.
P.O. Box 27 Rennbahnstrasse 72-74
Suite 804 - East Tower
Myllynkivenkuja 6 D-60528 Frankfurt am Main,
Dearborn, MI 48126
FI-01621 Vantaa Germany
USA
Finland Tel. +49 69 6786 880
Tel. +1 313 425 0850
Tel. +358 9 879 181 Fax +49 69 6786 8829
Fax +1 313 425 0860
Fax +358 9 8791 8791 E-mail: [email protected]
E-mail [email protected]
E-mail: [email protected]

Japan China
Akebono Brake Industry Co.,Ltd. VTI Technologies Shanghai Office To find out your local sales
5-4-71 Higashi, Hanyu-city 6th floor, Room 618 representative visit www.vti.fi
Saitama Pref., 348-8501 780 Cailun Lu
Japan Pudong New Area
Tel. +81 48 560 1470 201203 Shanghai
Fax +81 48 560 1469 P.R. China
www.akebono-brake.co.jp Tel. +86 21 5132 0418 or
E-mail: [email protected] +86 21 5132 0400 *112
Fax +86 21 513 20 416
E-mail: [email protected]

VTI Technologies Oy 5/5

www.vti.fi Doc. Nr. 82 682 00 C