CL212B
CL Series Dual 12' LH
Medium Line Array System
User Manual
U M- C L 2 1 2 B - 2 0 1 0 0 5 1 7 ver A
SAFETY INSTRUCTIONS
PLEASE READ THIS MANUAL FIRST
Thank you for a buying product. Read this manual first as it will help you operate the system properly. Please keep this manual
for future reference.
WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with
the product, please ensure they comply with the local safety codes.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important
operating and servicing instructions.
ATTENTION: Don't refit the system or spare parts without being authorized as this will void the warranty.
WARNING: Don't place naked flames (such as candles) close to the equipment.
1. Read the instruction manual first before using this product.
2. Please keep this manual for future reference
3. Pay attention to all warnings.
4. Obey all operating instructions.
5. Do not expose this product to rain or moisture.
6. Clean this equipment with a dry cloth.
7. Do not block any ventilation openings. Install according to manufacturer's instructions .
8. Do not install this product near any heat source, such as a, heater, burner, or any other equipment with heat radiation .
9. Only use spare parts supplied by the manufacturer.
10. Pay attention to the safety symbol on the outside of the cover.
1
CL212B
CL Series Medium Line Array System CONTENT
CONTENT
PRODUCT INTRODUCTION 3
Main Features 3
Product Description 3
Applications 3
CONNECTION 4
Push Terminals 4
Nl4 Connection 4
System Connection Example 4
INSTALLATION 5
Installation Guidance 5
TECHNICAL SPECIFICATIONS 6
Specifications 6
Frequency Response And Impedance Curve 6
Dimensions 7
Product information may be updated without
notification, please visit www.elderaudio.com for the
latest update.
2
CL212B
PRODUCT INTRODUCTION CL Series Medium Line Array System
CL212B
Double 12 LF
" Speaker
Main Features
Double 12 LF
" drivers inverted low frequency speaker.
Frequency Response 45 Hz 300 Hz (-3dB).
Sensitivity 92 dB, Max Sound Level 122 dB.
RMS Power 900W, Peak Power 3600w.
The cabinet adopts new paints and advanced spraying
techniques which greatly enhance the surface resistance.
Special designed connection accessories and hangs to combine
the application of CL110 and CL212B.Easy assembling .
The phase reversal cabinet design greatly reduce the
disturbance to low frequencies and thus enhance the
sound quality.
The sound produced by CL212B is clean powerful and elastic.
Product Description
β3 CL212B is a low frequency speaker with brand new shape CL212B is mainly applied in meeting rooms, large multifunction
and structure design as well as advanced paint spraying halls, auditorium, churches and mobile performance. The
techniques. It is combined of two 12' LF speaker. the sound characteristics of CL212B can be defined as clear full
100mm flat aluminum and TIL material bracket enable full and without any compromises on the massiness.
heat radiation. The RMS of the speaker can reach 900W
and short term peak power can reach 3600W.
The design of parallel magnetic circuit can reduce the odd
harmonic in the LF speaker to the fullest extent.
The cabinet of CL212B is made of 18mm thick plywood with
stretching resistance up to 4500N. The wedge structure
frees the cabinet from any nails. The paint on the surface
has high resistance to abrasion. The inverted bass design
which provides best sound quality is used in CL212B. Also the
phase reversal tube is improved to reduce the wind
speed. Thus sound quality is improved by reducing the Applications
disturbance to the low frequencies.
Multi-function hall
Thanks to the Q235 material and the powder spraying
techniques, the grill of CL212B has high intensity and high salt Auditorium
mist resistance. In the atmosphere of 5% sodium hydroxide,
Religion Place
it has salt mist resistance duration of 96 hours. In actual
application it can keep itself rust free for 5 years. The inner All kinds of living performance
side of the grill is padded with cottons to protect it from
rains. Assembly room
3
CL212B
CL Series Medium Line Array System CONNECTION
Two NL4 connectors are available for amplifier connections. Paralelled connector is very convenient for another speaker
connection.
Speakon
1+ 1- INPUT
CL212B
Warranty does not
cover damage caused
by incorrect installation,
operation or overload. 1+ +
LOW
No.:
1- -
INPUT
1+ 1- : INPUT
2-
2+
1+ +
1-
LOW
OUTPUT
-
FREQUENCY 45Hz-300Hz
POWER(RMS) 900W
SENSITIVITY(1W/1m) 92dB
IMPEDANCE 4Ω
NET WEIGHT 50kg
ELDER AUDIO MANUFACTURE CO., LTD
NL4 Wiring Connection
1. Connect 2. Disconnect
1
2
2
3
System Connection Reference
CHA
BRIDGE IN
-
A ! CAUTION
+ RISK OF ELECTRIC SHOCK
DO NOT OPEN
INPUT MODE LF FILTER CLIPLIMITER GROUND CHA OUTPUT
+
BRIDGE
PIN1: SIGNAL GND BRIDGE 50HZ OFF OFF
FUSE
PIN2: SIGNAL + PARALLEL 25HZ
PIN3: SIGNAL - STEREO 5HZ ON ON -
Special design for big power！
Serial no:
OUTPUT ASSIGNMENT: +
CHA: PIN 1+ : CHA SIGNAL CHB: PIN 1+ : CHB SIGNAL B
PIN 1 - : CHA GND PIN 1 - : CHB GND - POWER
PIN 2+ : CHB SIGNAL PIN 2+ :
PIN 2 - : CHB GND PIN 2 - :
CABLE
BRIDGE MONO OUTPUT:
CHB
CHA : PIN1+ : SIGNAL PIN2+ : GND CHB OUTPUT
CL212B CL212B
Warning: Please make sure the speaker impedance and polarity match the amplifiers.
4
CL212B
INSTALLATION COMPACT LINE ARRAY SOUND REINFORCEMENT
CL Series Medium Line Array SYSTEM
System
Installation Guidance
(1) Cl212B has customized hanging wares for convenient and
easy hanging and installation.
(2) The hanging wares include CL212B hanging bracket,CL110
cabinet front and rear hanging ware and the lockpins.
(3) The rear hanging ware is fixed on the cabinet for easy and
fast field vertical angle adjustment between the speakers.
(4) The hanging frame of CL212B is welding steel frame,
which can hang multiple CL110.But optional accessories
are provided according to actual requirements.
Flying Frame
CL110 Rear Panel
Hanging Plate
4 inch wheel
Wheel bracket(1-AZPJ-85)
4-YXPJ-112 with baking
CL110 Angel 4-YXPJ-113 without baking
Adjusting Plate
Lockpin
Safety Steel Wire
CL110 Front
Hanging Plate
Warning: Make sure the mounting accessories safety The number rear hanging plate indicates the current angle.
factor not less than 5:1 or meet the local standard during E.g. 1 means that the angle between 2 CL110 is 1.
installation .
5
CL212B
CL Series Medium Line Array System TECHNICAL SPECIFICATIONS
Specifications Speaker Testing Method
Product: Passive Paint Wooden Full 1. Frequency Response
Range Speaker
Use pink noise to test the speaker in the anechoic chamber, adjust the
LF Driver: 2×12" LF Drivers level to make the speaker work at its rated impedance and set the output
1
Frequency Response(-3db): 45Hz-300Hz power at 1W, then test the frequency response 1m away from the
speaker.
Frequency Response(-10db): 35Hz-600Hz
2
Sensitivity(1w@1m): 92dB
3 2. Sensitivity
Maximum. Spl(1m): 122dB/128dB(PEAK)
4 Use full range Pink noise which has been modified using an EQ
Power: 900W (RMS) curve to test thespeaker in the anechoic chamber, increasing the
1800W (MUSIC) signal to make the speaker work at its rated impedance and set the
3600W (PEAK) power output at 1W, then test the sensitivity 1m away from the
Rated Impedance: 4 ohms speaker.
Cabinet: Wedge Cabinet, 18mm Plywood
3. MAX.SPL
Installation: Special rigging brackets
and connection accessories Use full range Pink noise which has been modified using an EQ
curve to test the speaker in the anechoic chamber , increase the
Carry: 4×Wooden Handles signal to make the speaker work at its maximum power output
Paint: Polyurethane-based painting. level, then test the SPL1m away from the speaker.
Steel grille is coated by dots to
provide strong ultra-Weatherability.
Connector: NL4×2 4. Rated Power
Dimension(WXDXH): 540×680×713mm Use pink noise to the IEC#268-5 standard to test the speaker,
(21.3×26.8×28.1in) increase the signal for a continuous period of 100 hours, the
rated Power is the power whenthe speaker will show no visible
Packing Dimension(WXDXH): 784×670×853mm or measurable damage.
(30.9×26.4×33.6in)
Net Weight: 50kg(110 lb)
Gross Weight: 55kg(121 lb)
Optional Accessories: Flight Frame
Technical Specifications
110 50
Frequency Response
Impedance
100 30
90 18
Sensitivity (dB)
80 12
70 6.5
60 4
20 50 100 200 500 1k 2k 5k 10k 20k
6
CL212B
TECHNICAL SPECIFICATIONS CL Series Medium Line Array System
Dimensions
540mm
[21.26in]
520mm
[20.47in]
Front view
712.6mm
[28.06in]
697.3mm
[27.45in]
663.3mm
[26.11in]
Side view
Back view
7
Notes:
