Sricam

SP020
Quick User Manual

Sricam R

Customer Service
Monday - Saturday
9:00-18:00 Beijing Time (UTC +8)
E-Mail: [email protected]
Skype ID: tech.sricam
Website: www.sricam.com

For Videos of how to setup IP Cameras please visit Website: www.sricam.com/videos

 English

Products Introduction

MicroSD card Slot

Reset

DC 5V Power Slot

Hardware Installation
1: Screw the mount on the wall with the two screws
Provided.
2: Loosen the thumb screws to adjust the mount to
the desired position. Once the position is set, tighten
SricamR

the screws securely.

Before starting setup

Make sure of the following:
- Your router supports the 2.4GHz frequency band (802.11b/g/n).
- Your router DHCP is enabled.
- Your smartphone is connected to the Internet with a WLAN/Wi-Fi that the camera will connect with.
- You know the WLAN/Wi-Fi password.
- Your smartphone, camera, and router should be within about 8 feet during setup. After your camera
is set up,you can move the camera to your preferred location(the configurations are saved to camera
system）
-For Videos of how to setup IP Cameras please visit Website: www.sricam.com/videos

-1-
 English

Start setup
Step1. Product Connection

WAN LAN

Step1-1: Power the IP Camera.

Step1-2: Connect the camera to the network. (Connect the
camera to a Router or Switch with a RJ-45 Ethernet cable.)
Step1-3: Reset to default setting (After power on the camera,
then keep pressing the RESET button until you hear a clash
sound from the camera）

RESET
Step2. Sricam APP Installation
: Scan the QR code to download the“Sricam” App.

Search“Sricam”on Google Play or iOS App Store

-2-
 English

Step3. Register an APP User Account

Input the email

0551876

Keep password
Keep password

Forgot Password?
Please creat a password
for App account, please don't Forgot Password?

input your email password

3-1

Step4. View the Camera on a Smart Phone (Open the “Sricam”App and follow these steps)

Add device Add device

IPCam

1069813

Input password(default:888888)

Next

Note: The “Device ID” can

be found on the label which is
attached to the camera.
Note: Here take camera
ID:1069813 as an example.

-3-
 English

Add device Change Admin Password

Input old admin password

1069813
The device is online.For the security,you’d Password modify succeed
better change the password immediately Input new admin password
want to connect to Wi-Fi network?
Change Password
Input new admin password

Modify

Note: Please use a

complex password for the device.
Password should be 6-9 characters
long(A-Z, and 0-9)Without
special characters.

Wi-Fi Setting

IPCam Add new device

Sricamsales

Input Wi-Fi Password

Drop-down to refresh

Note: Tap this button for setting

APP“Authority, Multi-Media, System,
About us, Update, Logout. ”

Authority: Open “Audio / Pan Tilt /...”

Multi-Media: Check “Video Playback/ Local Pictures
/ Alarm List”

4-8

-4-
 English

Live video stream on smart phone

2.Screenshots

Microphone 9.Pan & Tilt

-If the IP camera can't be found in step4-4, please make sure you have done step 1-3 to insert
a pin to reset the IP camera and wait for 30 seconds.
-If you experience inconsistent signal,it could be due to 1)too many devices sharing the same
internet network.Or 2)the IP camera is too far from the router if using Wi-Fi connection.
-If you fail to setup the Wi-Fi network in step 4-7, please make sure your smart phone is not
connecting to a 5G Wi-Fi signal. You can resolve this issue by 1) reconnecting to a non-5G
Wi-Fi signal on your smart phone or 2) skip this step and setup the Wi-Fi by going through the
steps under “settings”>“Network Setting” on the app.
-For any other quality and setup issues,it is recommended you insert a pin (until you hear a
clash sound) to reset the IP camera.
For configuring and watching live videos on Windows PC, please download SricamPC
software and user manual at website: www.sricam.com/download

More FAQs:
1. How to restore the camera to factory settings
2. How can I add the camera to my 2nd phone
3. Camera ID, Camera Password, App Account ID and Password
4. How to setup Alarm Record
5. How to watch live streams with ONVIF clients
Please visit:
www.sricam.com/faqs

-5-
 English

FAQ1: MicroSD card record and playback setting

1) Insert the microSD card to the camera

2) MicroSD card format and record setting

Log in “Sricam” App and follow the steps:Settings -> Record Setting -> SD card Formatting-> Record Switch
(Note: If you use 64G or 128G SD card can't recording, you need to format the SD card to FAT32 format on
your PC. If the SD card recording is full,it will automatically loop coverage, you do not need to manually delete
the video file.)

Devices List Settings Record Setting

IPCam Add new device SD Card Total Space:3784M
IPCam
1 SD Card Free Space:827M
Device information

SD Card Formatting
Time Setting

Media Setting Record Type

Modify Playback Settings Delete
Security Setting
Manual Record
2 Network Setting Alarm Record
! Alarm Setting Timing Record

Record Setting
Record Switch

FAQ1-1 FAQ1-2 FAQ1-3

3) Record Playback(on App)

Log in “Sricam” App and follow the steps: Settings >> Playback
Tap " Playback" for playback the record on MicroSD card,as pictures below (Note: each record is 30 minutes)

Devices List Playback-63

IPCam Add new device SD card videos Phone local videos

Latest 1 Lastest 3
Latest 1 day Latest 3 days
1 month months

disc1/2017-02-02_14:00:00_S.av (1123S)

disc1/2017-02-02_13:30:00_S.av (1800S)

Modify Playback Settings Delete disc1/2017-02-02_13:00:00_S.av (1800S)

2 FAQ1-4 FAQ1-5

-6-
 English

FAQ2: How to Setup Motion Detection Alarm

Step1: Enable motion detection alarm
Step1-1: Tap “Settings” button >> “Settings” >> “Alarm setting” be the alarm setting window as pictures FAQ2-1 ,
FAQ2-2 and FAQ2-3.

Devices List Settings

IPCam Add new device IPCam

1 Device information

Time Setting
Media Setting
Security Setting
Modify Playback Settings Delete
Network Setting

2 ! Alarm Setting

Step1-2: Enable “Motion Detection Alarm” and “Alarm Switch” as FAQ2-3

Alarm Setting Email Alerts Save

Receive Notifications
Sender: Please input sender’s mail address
Push Notifications Account
SMTP server: Select the email SMTP server...
Email Alerts Unbound
port: Please input the port number
Motion Detect Sensitivity(The most sensitive’0’)
Password: Input password
Encryption mode
No encrypt SSL encrypt TLS encrypt
Motion Detection Alarm Receiver
Email: Input the email
Buzzer Alarm

Alarm Switch Email: Input the email

Step2: Choose motion detection alarm notification types

There are 3 types you can choose to get the alarm notification.
・ Phone push alarm
Enable “Receive Notifications” then the camera will push notification to your smart phone when an alarm is activated. Push
notification account is default as the Sricam app login account. If don’t need this function, you can delete the push account.
・ Buzzer alarm
Enable “Buzzer Alarm” then the camera’s buzzer works when an alarm is activated.
・ Email Alerts
The alarm notification will send to your designated email address.
Tap " Email Alerts", and fill in the email information as below guide
1. Sender: Please input your email address (e.g., [email protected]).
2. SMTP server: The server address for the Sender's email account.
3. Port: Please select 587 or 465 if the SMTP address is mtp.gmail.com, Smtp.mail.yahoo.com or smtp.live.com(Hotmail.com).
If not, please select 25.
4. Password: input password
5. Receiver: Enter up to three receiving email accounts (e.g., you may have both [email protected] and Marcy@yahoo. com)
as picture FAQ2-4
If failed to setup Email Alert, please activate your Gmail or Yahoo Email account, Please check FAQS 8 in website：
www.sricam.com/faqs
-7-