Scribd Logo
Upload

Welcome to Scribd!

  • 96 views

    Objectives: at The End of Practical Laboratory, Students Should Be Able

    Uploaded by

    cla ren raj
    1. The document outlines the objectives, tools, materials, and procedures for a practical laboratory on wiring installation. The objectives are to draw wiring diagrams, test circuits with and without power, and do inspections. 2. The procedures section details drawing a schematic, estimating materials, installing wires according to a marked route, connecting the circuit to power, and testing with a multimeter in various switch configurations. 3. Testing includes physical, visual, and insulation checks before operating the lamp under different switch conditions and making safety a priority during the installation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Objectives: at The End of Practical Laboratory, Students Should Be Able

    Uploaded by

    cla ren raj
    96 views4 pages
    1. The document outlines the objectives, tools, materials, and procedures for a practical laboratory on wiring installation. The objectives are to draw wiring diagrams, test circuits with and without power, and do inspections. 2. The procedures section details drawing a schematic, estimating materials, installing wires according to a marked route, connecting the circuit to power, and testing with a multimeter in various switch configurations. 3. Testing includes physical, visual, and insulation checks before operating the lamp under different switch conditions and making safety a priority during the installation.

    Original Title

    electrical

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document outlines the objectives, tools, materials, and procedures for a practical laboratory on wiring installation. The objectives are to draw wiring diagrams, test circuits with and without power, and do inspections. 2. The procedures section details drawing a schematic, estimating materials, installing wires according to a marked route, connecting the circuit to power, and testing with a multimeter in various switch configurations. 3. Testing includes physical, visual, and insulation checks before operating the lamp under different switch conditions and making safety a priority during the installation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    96 views4 pages

    Objectives: at The End of Practical Laboratory, Students Should Be Able

    Uploaded by

    cla ren raj
    1. The document outlines the objectives, tools, materials, and procedures for a practical laboratory on wiring installation. The objectives are to draw wiring diagrams, test circuits with and without power, and do inspections. 2. The procedures section details drawing a schematic, estimating materials, installing wires according to a marked route, connecting the circuit to power, and testing with a multimeter in various switch configurations. 3. Testing includes physical, visual, and insulation checks before operating the lamp under different switch conditions and making safety a priority during the installation.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    Objectives: At the end of practical laboratory, students should be able:

    1. To Drawing wiring diagram and using wiring tools.


    2. To draw schematic diagram.
    3. To do testing and inspections related to the wiring.
    i. Physical testing
    ii. Testing without power supply
    iii. Testing with power supply

    Tools: Materials:
    1. Side Cutter 1.Single Core PVC,(black and green 3/0.737mm)
    2. Tack Hammer 2.Screw,Tack Shoes,Plumbum
    3. Combination Plier 3.Three Pin Plug
    4. Test Pen 4.Lamb Holder
    5. Screw Driver 5.2 Way Switch with base
    6. Multimeter

    Procedures:
    A. Before wiring installation

    1. Draw schematic wiring diagram for circuit above


    2. Make estimation for cable length,clip and shoe tack
    3. Sketch the wiring route on the wiring board
    4. Cut the cable based on the length,colour and size

    B.During wiring installation


    1. Strip the end of each cable.
    2. String the cable using suitable tool.
    3. Install the wiring clip on wiring route within appropriate distance.
    4. Install the cable follows the sequence.
    5. Mark the end of cable (live and neutral) to avoid confusion during cable
    connection.
    6. Install the lamp base for mentol and casing base for switch.
    7. Make sure the cable polarity is correct. Any mistakes because polarity will
    cause dangerous.
    8. Connect the source of the wiring installation to AC supply in consumer box.

    C. Testing and Inspections the circuit.


    1. Do physical test and visual test.
    2. Used Megger Ohm Tester for insulation test.
    Switch 1 Switch 2 Lamp
    Live
    Neutral
    Earth

    3.Testing the lamp with power supply 240 Volt,


    Switch 1 Switch 1 lamp
    (OFF) (OFF)
    (OFF) (ON)
    (ON) (OFF)
    (ON) (ON)
    Conclusion
    Write the conclusions
    Questions
    1. Names 3 (three) examples of places for wiring installation above.
    2. Why the physical testing and visual testing is important?
    3. States 5(five) safety precaution while doing this wiring installation

    You might also like