Scribd
Upload
189 views2 pages

Pile Capacity Comp./Uplift

The document provides design details for a pile foundation for a monopole tower, including: - The pile will be 11.5 meters long and 0.6 meters in diameter, with 1.3 meters embedded in a pile cap. - Calculations determine the pile has a bearing capacity of 204.32 tons and uplift capacity of 109.55 tons based on soil type and properties at different depths. - The pile foundation is designed to support the loads from the monopole tower as per relevant Indian Standards.

Uploaded by

Pankaj Sherwal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
189 views2 pages

Pile Capacity Comp./Uplift

The document provides design details for a pile foundation for a monopole tower, including: - The pile will be 11.5 meters long and 0.6 meters in diameter, with 1.3 meters embedded in a pile cap. - Calculations determine the pile has a bearing capacity of 204.32 tons and uplift capacity of 109.55 tons based on soil type and properties at different depths. - The pile foundation is designed to support the loads from the monopole tower as per relevant Indian Standards.

Uploaded by

Pankaj Sherwal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TOWER FOUNDATION CONSTRUCTION DESIGNED BY PANKAJ SHERWAL

PROJECT
M/S ATC INDIA INFRASTRUCTURE PVT.
CLIENT CHECKED BY AMIT SHARMA
LTD.
DESIGN OF PILE FOUNDATION FOR
JOB NAME DATE 07-02-2020
MONOPOLE TOWER
Pile Capacity Comp./Uplift (As per IS2911 Part I/Sec 2)

Length of Pile below Ground Level L = 11.5 m


Dia of Pile D = 0.60 m
3
Effective Unit weight of soil at Pile Tip = 1.73 t/m
Bearing Capacity Factor Nq = 16.85
Bearing Capacity Factor = 20.10
Depth of Pile Cap = 1.30 m
2
Area of Pile Ap = 0.2827 m
Earth Pressure Coefficient k = 1.00
Times the
Overburden Considered for a depth of = 15
dia of pile
2
Overburden Pdi = 15.6 t/m
2
Overburden Pd = 20.1 t/m
Angle of Internal Friction at toe = 29 deg

Depth Overal sub d* sub Pdi As K x Pdi x


layer tan
m Depth t/m3 t/m2 t/m2 m2 tan ( ) x Asi

I-SAND 9 9 1.73 15.60 7.80 16.96 29 28.67 0.55 72.35

II-SAND 2.5 11.5 1.81 4.53 15.60 4.71 29 29 0.51 37.21

109.55
= %
Bearing Resistance = 94.76 T
Friction Bearing Resistance = 109.55 T

Total Pile Capcity in Bearing (Un-Factored) = 204.32 T


Total Pile Capcity in Uplift (Un-Factored) = 109.55 T

You might also like