3-In-1, Panel 90° / 12 dBd

Mechanical specifications BXV-80090/8CF ___

Length 2450 mm 96.5 in
When ordering, replace “___” with connector type.
Width 285 mm 11.2 in
Depth 160 mm 6.3 in Radiation-pattern1)
4)
Weight 12.25 kg 27.0 lbs
-100 -90 -80
Wind Area -120
-110 -70
-60
-130 -50
2 2
Front 0.698 m 7.51 ft -140 -40
Side 0.39 m2 4.22 ft2 -150 -30

-160 -20 Port 3

Rated Wind Velocity (Safety factor 2.0) Vertical
-170 -10
>332 km/hr >206 mph 180 35 30 25 20 15 10 5 0

Wind load @ 100 mph (161 km/hr) 170 10

160 20
Front 1140 N 256 lbs
150 30
Side 665 N 150 lbs
140 40

Antenna consisting of aluminum alloy with brass 130 50

120 60
feedlines covered by a UV safe fiberglass radome. 110
100 90 80
70

Mounting & Downtilting: Horizontal

Mounting brackets attach to a pipe diameter of
Ø50-160 mm (2.0-6.3 in). -100 -90 -80
-110 -70
-120 -60
Mounting bracket kit #36210002 -130 -50

Downtilt bracket kit #36114003 -140 -40 Port 1 Port 2

-150 -30 Slant +45° Slant -45°

Electrical specifications
-160 -20

-170 -10
Frequency Range 806-900 MHz 180 35 30 25 20 15 10 5 0

Impedance 50Ω 170 10

160 20
3)
Connector NE, E-DIN 150 30
1)
VSWR ≤1.4:1 140 40
Diagram: As viewed from
130 50
120 60 the back
Transmit Polarization Vertical 110 70
100 90 80

1)
Isolation Between Ports Vertical Amphenol Antel’s
±45°/±45° < -30 dB Exclusive 3T (True
±45°/Vertical < -30 dB Transmission Line
1)
Radiation patterns for all antennas Technology)
Gain 12 dBd Antenna Design:
are measured with the antenna
2)
Power Rating 500 W mounted on a fiberglass pole.
1)
Half Power Angle • Watercut brass feedline assembly for
Mounting on a metal pole will consistent performance.
H-Plane 90°
typically improve the Front-to- • Unique feedline design eliminates the
E-Plane 15° Back Ratio. need for conventional solder joints in the
1)
Electrical Downtilt 0° signal path.
1)
Null Fill 5%
• A non-collinear system with access to
every radiating element for broad
Lightning Protection Direct Ground bandwidth and superior performance.
• Air as insulation for virtually no internal
signal loss.
Every Amphenol Antel antenna is under a five-
Patented Dipole Design: U.S. Patent No. 6,608,600 B2 year limited warranty for repair or replacement.
1)
2)
Typical Values CF Denotes a Center-Fed
Power Rating limited by connector only.
3)
NE indicates an elongated N Connector. Connector.
E-DIN indicates an elongated DIN Connector.
4)
The antenna weight listed above does not include the bracket weight.

Improvements to mechanical and/or electrical performance of the

antenna may be made without notice. 806-960 MHz
1300 Capital Drive Rockford, IL 61109 Toll-Free (888) 417-9562 Tel. (815) 399-0001 Revision Date: 8/23/05
Fax. (815) 399-0156 Email: [email protected] www.antelinc.com