Scribd Logo
Upload

Welcome to Scribd!

  • 365 views

    Fault Code 135: Engine Oil Pressure Sensor Circuit

    Uploaded by

    hamilton miranda
    The document discusses fault code 135 for an engine oil pressure sensor circuit. The fault code indicates a high signal voltage detected, meaning the sensor circuit is shorted high. This would provide no engine protection for oil pressure. Possible causes are an open return in the harness or connectors, or a signal wire shorted to supply voltage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fault Code 135: Engine Oil Pressure Sensor Circuit

    Uploaded by

    hamilton miranda
    365 views2 pages
    The document discusses fault code 135 for an engine oil pressure sensor circuit. The fault code indicates a high signal voltage detected, meaning the sensor circuit is shorted high. This would provide no engine protection for oil pressure. Possible causes are an open return in the harness or connectors, or a signal wire shorted to supply voltage.

    Original Description:

    Solución de falla

    Original Title

    70-fc135

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses fault code 135 for an engine oil pressure sensor circuit. The fault code indicates a high signal voltage detected, meaning the sensor circuit is shorted high. This would provide no engine protection for oil pressure. Possible causes are an open return in the harness or connectors, or a signal wire shorted to supply voltage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    365 views2 pages

    Fault Code 135: Engine Oil Pressure Sensor Circuit

    Uploaded by

    hamilton miranda
    The document discusses fault code 135 for an engine oil pressure sensor circuit. The fault code indicates a high signal voltage detected, meaning the sensor circuit is shorted high. This would provide no engine protection for oil pressure. Possible causes are an open return in the harness or connectors, or a signal wire shorted to supply voltage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    File: 70-fc135 Page 1 of 2

    Fault Code 135

    Engine Oil Pressure Sensor Circuit

    CODES REASON EFFECT

    Fault Code: 135 Engine Oil Pressure Sensor Circuit No engine protection for engine oil pressure.
    PID(P), SID(S): P100 - shorted high. High signal voltage
    SPN: 100 detected at the engine oil pressure
    FMI: 3/3 circuit.
    Lamp: Amber
    SRT:

    Engine Oil Pressure Sensor Circuit

    Circuit Description:
    The engine oil pressure sensor is used by the electronic control module (ECM) to monitor the lubricating oil pressure.
    The ECM monitors the voltage on the signal pin and converts this to a pressure value. The oil pressure value is used by
    the ECM for the engine protection system.

    Component Location:
    The engine oil pressure sensor is located on the intake side of the engine block, below and to the rear of the integrated
    fuel system module (IFSM). Refer to Section E for a detailed component location view.

    Shop Talk:
    The engine oil pressure sensor shares supply and return wires in the engine harness with other sensors. Opens and
    shorts in the engine harness can cause multiple fault codes to be active. Before troubleshooting fault code 135, check
    for multiple faults.
    Possible causes of this fault code include:
    • Open return in the harness, connectors, or sensor.
    • Signal wire shorted to sensor supply or battery voltage.

    Refer to Troubleshooting Fault Code t05-135

    © 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
    All Rights Reserved. Last Modified: 01-Sep-2010
    File: 70-fc135 Page 2 of 2

    © 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
    All Rights Reserved. Last Modified: 01-Sep-2010

    You might also like