Scribd
Upload
39 views3 pages

Ii Internal CT

The document contains details of an internal test for a circuit theory course including 10 questions to be answered in parts A and B worth 40 total marks over 1.5 hours. Questions cover topics like bandwidth, resonance, impedance diagrams, self and mutual inductance, dot rule, selectivity, resonant frequency, Q factor, and coupled circuits.

Uploaded by

Kannan Alagumuthiah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
39 views3 pages

Ii Internal CT

The document contains details of an internal test for a circuit theory course including 10 questions to be answered in parts A and B worth 40 total marks over 1.5 hours. Questions cover topics like bandwidth, resonance, impedance diagrams, self and mutual inductance, dot rule, selectivity, resonant frequency, Q factor, and coupled circuits.

Uploaded by

Kannan Alagumuthiah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Rajiv Gandhi College of Engineering and Technology

Department of Electronics and Communication Engineering


Date : 29.08.2015 Max. Marks : 40 Max. Time : 1 ½ Hrs Rajiv Gandhi College of Engineering and Technology

II ECE B INTERNAL TEST II CIRCUIT THEORY Department of Electronics and Communication Engineering

PART A (5 * 2 = 10) Answer All Questions Date : 29.08.2015 Max. Marks : 40 Max. Time : 1 ½ Hrs
II ECE B INTERNAL TEST II CIRCUIT THEORY
1. Define bandwidth and state the condition for series resonance. PART A (5 * 2 = 10) Answer All Questions
2. Draw the impedance diagram and voltage current relationship diagram for
series RL, RC and Parallel RL, RC circuits. 1. Define bandwidth and state the condition for series resonance.
3. Define self-inductance and mutual inductance. 2. Draw the impedance diagram and voltage current relationship diagram for
4. Define Dot rule and write the equation for the same with an example. series RL, RC and Parallel RL, RC circuits.
5. What is the importance of selectivity parameter? 3. Define self-inductance and mutual inductance.
PART B (3 * 10 = 30) 4. Define Dot rule and write the equation for the same with an example.
6. A series RLC circuit consists of a resistance of 1 KΩ and an inductance 5. What is the importance of selectivity parameter?
100 mH in series with capacitance 10 p. If 100 V is applied as input across PART B (3 * 10 = 30)
the combination determine the resonant frequency, Maximum current in 6. A series RLC circuit consists of a resistance of 1 KΩ and an inductance
circuit, Q factor of the circuit. 100 mH in series with capacitance 10 p. If 100 V is applied as input across
(10) the combination determine the resonant frequency, Maximum current in
(or) circuit, Q factor of the circuit.
7. A sine wave generator supplies a 500 Hz, 10 V rms signal to a 2 KΩ (10)
resistor in series with a 0.1 µF capacitor as shown in figure. Determine the (or)
total impedance Z, current I, phase angle θ, capacitive voltage V C and 7. A sine wave generator supplies a 500 Hz, 10 V rms signal to a 2 KΩ
resistive voltage VR. resistor in series with a 0.1 µF capacitor as shown in figure. Determine the
(10) total impedance Z, current I, phase angle θ, capacitive voltage V C and
resistive voltage VR.
(10)
8. Derive the bandwidth and Q factor of an series RLC circuit. (10)
(or)
9. The voltage VS = 100 cos ωt mV is applied to a series resonant circuit
composed of a 10 Ω resistance, a 200 nF capacitance and a 2 mH 8. Derive the bandwidth and Q factor of an series RLC circuit. (10)
inductance. Calculate current amplitude if ω = 48 Krad/sec. (or)
(10) 9. The voltage VS = 100 cos ωt mV is applied to a series resonant circuit
10. a) Explain how the multi winding coupled circuits can be analyzed. (4) composed of a 10 Ω resistance, a 200 nF capacitance and a 2 mH
b) Explain the dot conversion rule. Write the voltage equations of the coils inductance. Calculate current amplitude if ω = 48 Krad/sec.
using dot rule. (6) (10)
(or) 10. a) Explain how the multi winding coupled circuits can be analyzed. (4)
11. Find the voltage across the 10Ω resistor for the network shown in figure b) Explain the dot conversion rule. Write the voltage equations of the coils
below (10) using dot rule. (6)
(or)
1. Find the voltage across the 10Ω resistor for the network shown in figure
below (10)

You might also like