SCREW INSERTS http://www.shing-hing.com.

hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Pan Head

Cross Drive/PZ Drive of Pan Head 十字/米字糟盆頭 JIS B1111

unit : mm
dk k m q(1) r da
Designation of Pitch No. of
Basic Per-mis- Basic Per-mis-
thread cross sible sible Ref Max Min Min Max
Size Size
(d) (P) recess deviation deviation

M2 0.40 #1 3.50 0-0.4 1.30 ±0.10 2.20 1.01 0.60 0.10 2.60

(M 2.2) 0.45 #1 4.00 0-0.4 1.50 ±0.10 2.40 1.21 0.80 0.10 2.80

M 2.5 0.45 #1 4.50 0-0.4 1.70 ±0.10 2.60 1.42 1.00 0.10 3.10

M3 0.50 #2 5.50 0-0.5 2.00 ±0.15 3.60 1.43 0.86 0.10 3.60

Shing Hing Industrial Limited - FASTENERS HANDBOOK

(M3.5) 0.60 #2 6.00 0-0.5 2.30 ±0.15 3.90 1.73 1.15 0.10 4.10

M4 0.70 #2 7.00 0-0.5 2.60 ±0.15 4.20 2.03 1.45 0.20 4.70

(M4.5) 0.75 #2 8.00 0-0.6 2.90 ±0.15 4.60 2.43 1.84 0.20 5.20

M5 0.80 #2 9.00 0-0.6 3.30 ±0.15 4.90 2.73 2.14 0.20 5.70

M6 1.00 #3 10.50 0-0.7 3.90 ±0.20 6.30 2.86 2.26 0.25 6.80

M8 1.25 #3 14.00 0-0.8 5.20 ±0.20 7.80 4.36 3.73 0.40 9.20

* (1): The Dimension a indicates the gauge penetration depth of the cross recess.
27
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Flat Head

Cross Drive/PZ Drive of Flat Head Screws

JIS B1111
十字/米字糟沉頭 unit : mm

dk k c m q(1)
Designation of Pitch No. of
thread cross Basic Per-mis- Basic Per-missible
sible deviation Approx Ref Max Min
(d) (P) recess Size deviation Size

M2 0.40 #1 4.00 0-0.4 1.20 0-0.2 0.20 2.20 1.01 0.65

(M 2.2) 0.45 #1 4.40 0-0.4 1.30 0-0.2 0.20 2.40 1.21 0.85

M 2.5 0.45 #1 5.00 0-0.4 1.45 0-0.2 0.20 2.60 1.42 1.05

M3 0.50 #2 6.00 0-0.5 1.75 0-0.3 0.25 3.60 1.43 0.91

Shing Hing Industrial Limited - FASTENERS HANDBOOK

(M 3.5) 0.6 #2 7.00 0-0.5 2.00 0-0.3 0.25 4.10 1.93 1.40

M4 0.70 #2 8.00 0-0.5 2.30 0-0.3 0.30 4.50 2.33 1.79

(M4.5) 0.75 #2 9.00 0-0.6 2.55 0-0.3 0.30 4.90 2.73 2.19

M5 0.80 #2 10.00 0-0.6 2.80 0-0.3 0.30 5.10 2.93 2.38

M6 1.00 #3 12.00 0-0.7 3.40 0-0.4 0.40 6.70 3.26 2.70

M8 1.25 #3 16.00 0-0.8 4.40 0-0.4 0.40 8.40 4.96 4.36

* (1): The Dimension a indicates the gauge penetration depth of the cross recess.
28
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Oval Head

Cross Drive/PZ Drive of Oval Head Screws

JIS B1111
十字/米字糟扁圓沉頭 unit : mm
dk k c f m q(1)
Designation of Pitch No. of
Basic Per-mis- Basic Per-mis-
thread cross sible sible Approx Approx Ref Max Min
Size Size
(d) (P) recess deviation deviation

M2 0.40 #1 4.00 0-0.4 1.20 0-0.2 0.20 0.40 2.40 1.21 0.85

(M 2.2) 0.45 #1 4.40 0-0.4 1.30 0-0.2 0.20 0.50 2.70 1.52 1.14

M 2.5 0.45 #1 5.00 0-0.4 1.45 0-0.2 0.20 0.55 2.90 1.72 1.34

M3 0.50 #2 6.00 0-0.5 1.75 0-0.3 0.25 0.70 3.80 1.63 1.11

Shing Hing Industrial Limited - FASTENERS HANDBOOK

(M 3.5) 0.60 #2 7.00 0-0.5 2.00 0-0.3 0.25 0.80 4.30 2.13 1.60

M4 0.70 #2 8.00 0-0.5 2.30 0-0.3 0.30 0.90 4.70 2.53 1.99

(M4.5) 0.75 #2 9.00 0-0.6 2.55 0-0.3 0.30 1.00 5.10 2.93 2.38

M5 0.80 #2 10.00 0-0.6 2.80 0-0.3 0.30 1.20 5.30 3.13 2.58

M6 1.00 #3 12.00 0-0.7 3.40 0-0.4 0.40 1.40 6.90 3.46 2.90

M8 1.25 #3 16.00 0-0.8 4.40 0-0.4 0.40 1.80 8.60 5.16 4.56

* (1): The Dimension a indicates the gauge penetration depth of the cross recess
29
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Truss Head

Cross Drive/PZ Drive of Truss Head Screws

JIS B1111
十字/米字糟扁圓頭 unit : mm
dk k m q(1) da
Designation of Pitch No. of
thread cross Basic Per-mis- Basic Per-missible
sible deviation Ref Max Min Max
(d) (P) recess Size deviation Size

M2 0.40 #1 4.50 0-0.4 1.20 ±0.10 2.20 1.01 0.65 2.60

(M 2.2) 0.45 #1 5.00 0-0.4 1.30 ±0.10 2.30 1.11 0.75 2.80

M 2.5 0.45 #1 5.70 0-0.4 1.50 ±0.10 2.50 1.32 0.95 3.10

M3 0.50 #1 6.90 0-0.5 1.90 ±0.15 2.90 1.72 1.34 3.60

Shing Hing Industrial Limited - FASTENERS HANDBOOK

(M 3.5) 0.60 #2 8.10 0-0.5 2.20 ±0.15 4.00 1.83 1.30 4.10

M4 0.70 #2 9.40 0-0.5 2.50 ±0.15 4.30 2.13 1.60 4.70

(M4.5) 0.75 #2 10.60 0-0.6 2.80 ±0.15 4.70 2.53 1.99 5.20

M5 0.80 #2 11.80 0-0.6 3.10 ±0.15 5.00 2.83 2.29 5.70

M6 1.00 #3 14.00 0-0.7 3.70 ±0.15 6.30 2.86 2.31 6.80

M8 1.25 #3 17.80 0-0.8 4.80 ±0.20 7.80 4.36 3.78 9.20

* (1): The Dimension a indicates the gauge penetration depth of the cross recess
30
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Binding Head

Cross Drive/PZ Drive of Binding Head Screws

十字/米字糟盆圓頭 JIS B1111
unit : mm
dk k f m q(1)
Designation of Pitch No. of
thread cross Basic Per-mis- Basic Per-missible
sible Approx deviation Ref Max Min
(d) (P) recess Size deviation Size

M2 0.40 #1 4.30 0-0.4 0.85 0.35 ±0.10 2.20 1.01 0.65

(M 2.2) 0.45 #1 4.70 0-0.4 0.90 0.40 ±0.10 2.30 1.11 0.75

M 2.5 0.45 #1 5.30 0-0.4 1.00 0.50 ±0.10 2.50 1.32 0.95

M3 0.50 #2 6.30 0-0.5 1.30 0.60 ±0.10 3.70 1.53 1.01

Shing Hing Industrial Limited - FASTENERS HANDBOOK

(M 3.5) 0.60 #2 7.30 0-0.5 1.50 0.70 ±0.15 4.00 1.83 1.30

M4 0.70 #2 8.30 0-0.5 1.70 0.80 ±0.15 4.30 2.13 1.60

(M4.5) 0.75 #2 9.30 0-0.6 1.90 0.90 ±0.15 4.70 2.53 1.99

M5 0.80 #2 10.30 0-0.6 2.10 1.00 ±0.15 5.00 2.83 2.29

M6 1.00 #3 12.40 0-0.7 2.40 1.30 ±0.15 6.30 2.86 2.31

M8 1.25 #3 16.40 0-0.8 3.10 1.70 ±0.20 7.80 4.36 3.78

* (1): The Dimension a indicates the gauge penetration depth of the cross recess
31
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Round Head

Cross Drive/PZ Drive of Round Head Screws

十字/米字糟圓頭 JIS B1111
unit : mm
dk k m q(1) r da
Designation of Pitch No. of
Basic Per-mis- Basic Per-mis-
thread cross sible sible Ref Max Min Min Max
(d) (P) recess Size deviation Size deviation

M2 0.40 #1 3.50 0-0.4 1.30 ±0.10 2.10 0.91 0.50 0.10 2.60

(M 2.2) 0.45 #1 4.00 0-0.4 1.50 ±0.10 2.30 1.11 0.70 0.10 2.80

M 2.5 0.45 #1 4.50 0-0.4 1.70 ±0.10 2.50 1.32 0.90 0.10 3.10

M3 0.50 #2 5.50 0-0.5 2.00 ±0.15 3.50 1.33 0.76 0.10 3.60
Shing Hing Industrial Limited - FASTENERS HANDBOOK

(M 3.5) 0.60 #2 6.00 0-0.5 2.30 ±0.15 3.80 1.63 1.06 0.10 4.10

M4 0.70 #2 7.00 0-0.5 2.60 ±0.15 4.10 1.93 1.35 0.20 4.70

(M4.5) 0.75 #2 8.00 0-0.6 3.00 ±0.15 4.50 2.33 1.74 0.20 5.20

M5 0.80 #2 9.00 0-0.6 3.40 ±0.15 4.80 2.63 2.04 0.20 5.70

M6 1.00 #3 10.50 0-0.7 4.00 ±0.20 6.20 2.76 2.16 0.25 6.80

M8 1.25 #3 14.00 0-0.8 5.40 ±0.20 7.70 4.26 3.63 0.40 9.20

* (1): The Dimension a indicates the gauge penetration depth of the cross recess
32
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Pan Head Binding Head

Cross Recessed Drive 十字糟

ANSI B18.6.3 1972
unit : inch

Pan head Binding Head

Nominal Size
or Basic Screw T N T N
Driver Size

Driver Size
Diameter Recess Recess
Recess Depth Recess Depth
Width Width
Max Min Min Max Min Min

#0 0.0600 0.039 0.021 0.013 #0 0.040 0.023 0.013 #0

#1 0.0730 0.045 0.025 0.014 #0 0.047 0.030 0.014 #0
#2 0.0860 0.059 0.041 0.017 #1 0.058 0.041 0.017 #1

Shing Hing Industrial Limited - FASTENERS HANDBOOK

#3 0.0990 0.068 0.050 0.019 #1 0.068 0.051 0.017 #1
#4 0.1120 0.078 0.060 0.019 #1 0.077 0.059 0.017 #1
#5 0.1250 0.083 0.057 0.028 #2 0.075 0.051 0.018 #2
#6 0.1380 0.091 0.066 0.028 #2 0.088 0.064 0.026 #2
#8 0.1640 0.108 0.082 0.030 #2 0.114 0.090 0.028 #2
#10 0.1900 0.124 0.100 0.031 #2 0.134 0.109 0.029 #2
#12 0.2160 0.141 0.115 0.034 #3 0.151 0.126 0.032 #3
1/4 0.2500 0.161 0.135 0.036 #3 0.164 0.140 0.046 #3
5/16 0.3125 0.193 0.169 0.059 #4 0.195 0.172 0.068 #4
3/8 0.3750 0.233 0.210 0.065 #4 0.247 0.223 0.076 #4
7/16 0.4375 0.259 0.234 0.068 #4 - - - -
1/2 0.5000 0.280 0.255 0.071 #4 - - - -
9/16 0.5625 0.312 0.288 0.076 #4 - - - -
33

5/8 0.6250 0.343 0.314 0.081 #5 - - - -

3/4 0.7500 0.382 0.355 0.086 #5 - - - -
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Truss Head Oval Head

Cross Recessed Drive 十字糟

ANSI B18.6.3 1972
unit : inch

Truss head Oval Head

Nominal Size
or Basic Screw T N T N
Driver Size

Driver Size
Diameter Recess Recess
Recess Depth Recess Depth
Width Width
Max Min Min Max Min Min
#0 0.0600 0.037 0.019 0.013 #0 0.045 0.027 0.014 #0
#1 0.0730 0.045 0.027 0.014 #0 0.048 0.030 0.015 #0
#2 0.0860 0.059 0.041 0.018 #1 0.069 0.052 0.018 #1
Shing Hing Industrial Limited - FASTENERS HANDBOOK

#3 0.0990 0.066 0.049 0.018 #1 0.081 0.064 0.019 #1

#4 0.1120 0.069 0.051 0.018 #1 0.094 0.077 0.019 #1
#5 0.1250 0.085 0.067 0.019 #1 0.085 0.061 0.028 #2
#6 0.1380 0.084 0.059 0.027 #2 0.105 0.080 0.030 #2
#8 0.1640 0.099 0.074 0.029 #2 0.119 0.095 0.031 #2
#10 0.1900 0.115 0.090 0.030 #2 0.137 0.113 0.033 #2
#12 0.2160 0.128 0.103 0.032 #3 0.152 0.128 0.038 #3
1/4 0.2500 0.143 0.118 0.033 #3 0.173 0.148 0.040 #3
5/16 0.3125 0.193 0.168 0.059 #4 0.238 0.214 0.065 #4
3/8 0.3750 0.226 0.202 0.063 #4 0.257 0.233 0.068 #4
7/16 0.4375 0.257 0.232 0.068 #4 0.269 0.245 0.070 #4
1/2 0.5000 0.288 0.263 0.072 #4 0.283 0.259 0.071 #4
9/16 0.5625 0.302 0.278 0.074 #4 0.316 0.292 0.075 #4
34

5/8 0.6250 0.322 0.289 0.077 #5 0.356 0.324 0.081 #5

3/4 0.7500 0.384 0.352 0.085 #5 0.421 0.390 0.088 #5
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Flat Head Fillister Head

Cross Recessed Drive 十字糟

ANSI B18.6.3 1972
unit : inch

Flat head Fillister Head

Nominal Size
or Basic Screw T N T N
Driver Size

Driver Size
Diameter Recess Recess
Recess Depth Recess Depth
Width Width
Max Min Min Max Min Min

#0 0.0600 0.043 0.027 0.014 #0 0.039 0.021 0.013 #0

#1 0.0730 0.051 0.035 0.015 #0 0.045 0.025 0.014 #0
#2 0.0860 0.063 0.047 0.017 #1 0.059 0.041 0.017 #1

Shing Hing Industrial Limited - FASTENERS HANDBOOK

#3 0.0990 0.068 0.052 0.018 #1 0.068 0.050 0.019 #1
#4 0.1120 0.089 0.073 0.018 #1 0.078 0.060 0.019 #1
#5 0.1250 0.086 0.063 0.027 #2 0.067 0.042 0.027 #2
#6 0.1380 0.106 0.083 0.029 #2 0.091 0.066 0.028 #2
#8 0.1640 0.121 0.098 0.030 #2 0.108 0.082 0.030 #2
#10 0.1900 0.136 0.113 0.032 #2 0.124 0.100 0.031 #2
#12 0.2160 0.156 0.133 0.035 #3 0.141 0.115 0.034 #3
1/4 0.2500 0.171 0.148 0.036 #3 0.161 0.135 0.036 #3
5/16 0.3125 0.216 0.194 0.061 #4 0.203 0.177 0.042 #3
3/8 0.3750 0.245 0.223 0.065 #4 0.233 0.210 0.065 #4
7/16 0.4375 0.261 0.239 0.068 #4 0.259 0.234 0.068 #4
1/2 0.5000 0.276 0.254 0.069 #4 0.280 0.255 0.071 #4
35

9/16 0.5625 0.300 0.278 0.073 #4 0.312 0.288 0.076 #4

5/8 0.6250 0.342 0.316 0.079 #5 0.343 0.314 0.081 #5
3/4 0.7500 0.406 0.380 0.087 #5 0.382 0.355 0.086 #5
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Pan Head Binding Head

PZ Drive 米字糟 ANSI B18.6.3 1972

unit : inch

Pan Head Binding Head

Nominal Size
or Basic Screw T N T N
Driver Size

Driver Size
Diameter Recess Recess
Recess Depth Recess Depth
Width Width
Max Min Min Max Min Min
#0 0.0600 0.040 0.024 0.018 #0 0.040 0.024 0.018 #0
#1 0.0730 0.047 0.031 0.018 #0 0.049 0.033 0.018 #0
#2 0.0860 0.064 0.048 0.028 #1 0.065 0.049 0.029 #1
Shing Hing Industrial Limited - FASTENERS HANDBOOK

#3 0.0990 0.073 0.057 0.029 #1 0.070 0.054 0.029 #1

#4 0.1120 0.083 0.067 0.029 #1 0.078 0.062 0.029 #1
#5 0.1250 0.084 0.066 0.040 #2 0.075 0.057 0.040 #2
#6 0.1380 0.092 0.074 0.040 #2 0.087 0.069 0.040 #2
#8 0.1640 0.108 0.090 0.041 #2 0.113 0.095 0.041 #2
#10 0.1900 0.124 0.106 0.041 #2 0.131 0.113 0.041 #2
#12 0.2160 0.139 0.121 0.056 #3 0.147 0.129 0.056 #3
1/4 0.2500 0.159 0.141 0.057 #3 0.161 0.143 0.057 #3
5/16 0.3125 0.191 0.173 0.086 #4 0.190 0.172 0.086 #4
3/8 0.3750 0.228 0.210 0.086 #4 0.240 0.222 0.086 #4
7/16 0.4375 0.251 0.233 0.086 #4 - - - -
1/2 0.5000 0.273 0.255 0.086 #4 - - - -
36

9/16 0.5625 0.304 0.286 0.087 #4 - - - -

5/2 0.6250 0.333 0.312 0.098 #5 - - - -
3/4 0.7500 0.379 0.358 0.098 #5 - - - -
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Truss Head Oval Head

PZ Drive 米字糟 ANSI B18.6.3 1972

unit : inch

Truss Head Oval Head

Nominal Size
or Basic Screw T N T N
Driver Size

Driver Size
Diameter Recess Recess
Recess Depth Recess Depth
Width Width
Max Min Min Max Min Min
#0 0.0600 0.037 0.021 0.018 #0 0.048 0.032 0.018 #0
#1 0.0730 0.045 0.029 0.018 #0 0.051 0.035 0.018 #0
#2 0.0860 0.059 0.043 0.029 #1 0.073 0.057 0.029 #1

Shing Hing Industrial Limited - FASTENERS HANDBOOK

#3 0.0990 0.066 0.050 0.029 #1 0.085 0.069 0.030 #1
#4 0.1120 0.069 0.053 0.029 #1 0.097 0.081 0.030 #1
#5 0.1250 0.085 0.069 0.030 #1 0.089 0.071 0.041 #2
#6 0.1380 0.080 0.062 0.041 #2 0.109 0.091 0.041 #2
#8 0.1640 0.094 0.076 0.041 #2 0.124 0.106 0.041 #2
#10 0.1900 0.110 0.092 0.042 #2 0.141 0.123 0.041 #2
#12 0.2160 0.122 0.104 0.055 #3 0.157 0.139 0.056 #3
1/4 0.2500 0.136 0.118 0.056 #3 0.177 0.159 0.057 #3
5/16 0.3125 0.187 0.169 0.086 #4 0.241 0.223 0.086 #4
3/8 0.3750 0.219 0.201 0.086 #4 0.262 0.244 0.086 #4
7/16 0.4375 0.249 0.231 0.086 #4 0.274 0.256 0.086 #4
1/2 0.5000 0.278 0.260 0.086 #4 0.289 0.271 0.086 #4
9/16 0.5625 0.283 0.265 0.086 #4 0.311 0.293 0.087 #4
37

5/8 0.6250 0.304 0.283 0.097 #5 0.338 0.317 0.098 #5

3/4 0.7500 0.362 0.341 0.098 #5 0.400 0.379 0.099 #5
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Flat Head Fillister Head

PZ Drive 米字糟 ANSI B18.6.3 1972

unit : inch

Flat Head Fillister Head

Nominal Size
or Basic Screw T N T N
Driver Size

Driver Size
Diameter Recess Recess
Recess Depth Recess Depth
Width Width
Max Min Min Max Min Min

#0 0.0600 0.044 0.028 0.018 #0 0.040 0.024 0.018 #0

#1 0.0730 0.052 0.036 0.018 #0 0.047 0.031 0.018 #0
#2 0.0860 0.063 0.047 0.028 #1 0.064 0.048 0.028 #1
Shing Hing Industrial Limited - FASTENERS HANDBOOK

#3 0.0990 0.068 0.052 0.028 #1 0.073 0.057 0.029 #1

#4 0.1120 0.089 0.073 0.030 #1 0.083 0.067 0.029 #1
#5 0.1250 0.086 0.068 0.041 #2 0.070 0.052 0.040 #2
#6 0.1380 0.107 0.089 0.041 #2 0.092 0.074 0.040 #2
#8 0.1640 0.121 0.103 0.041 #2 0.108 0.090 0.041 #2
#10 0.1900 0.136 0.118 0.041 #2 0.124 0.106 0.041 #2
#12 0.2160 0.158 0.140 0.056 #3 0.139 0.121 0.056 #3
1/4 0.2500 0.173 0.155 0.027 #3 0.159 0.141 0.057 #3
5/16 0.3125 0.220 0.202 0.086 #4 0.202 0.184 0.057 #3
3/8 0.3750 0.248 0.230 0.086 #4 0.228 0.210 0.086 #4
7/16 0.4375 0.265 0.247 0.086 #4 0.251 0.233 0.086 #4
1/2 0.5000 0.280 0.262 0.086 #4 0.273 0.255 0.086 #4
38

9/16 0.5625 0.303 0.285 0.087 #4 0.304 0.286 0.087 #4

5/8 0.6250 0.345 0.324 0.098 #5 0.333 0.312 0.098 #5
3/4 0.7500 0.410 0.389 0.099 #5 0.379 0.358 0.098 #5
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Pan Head Flat Head

Slotted Drive of Pan Head 一字糟盆頭 JIS B 1101

unit : mm
Designation M 1.6 M2 M 2.5 M3 (M3.5) M4 M5 M6 M8 M 10
of threads (d)
Pitch (P) 0.35 0.40 0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50
a Max. 0.70 0.80 0.90 1.00 1.20 1.40 1.60 2.00 2.50 3.00
b Min. 25.00 25.00 25.00 25.00 38.00 38.00 38.00 38.00 38.00 38.00
dk Nominal=Max. 3.20 4.00 5.00 5.60 7.00 8.00 9.50 12.00 16.00 20.00
Min. 2.90 3.70 4.70 5.30 6.64 7.64 9.14 11.57 15.57 19.48
da Max. 2.00 2.60 3.10 3.60 4.10 4.70 5.70 6.80 9.20 11.20
k Nominal=Max. 1.00 1.30 1.50 1.80 2.10 2.40 3.00 3.60 4.80 6.00
Min. 0.86 1.16 1.36 1.66 1.96 2.26 2.86 3.30 4.50 5.70
n Nominal 0.40 0.50 0.60 0.80 1.00 1.20 1.20 1.60 2.00 2.50
Max. 0.60 0.70 0.80 1.00 1.20 1.51 1.51 1.91 2.31 2.81

Shing Hing Industrial Limited - FASTENERS HANDBOOK

Min. 0.46 0.56 0.66 0.86 1.06 1.26 1.26 1.66 2.06 2.56
t Min. 0.35 0.50 0.60 0.70 0.80 1.00 1.20 1.4 1.9 2.4

Slotted Drive of Flat Head Screws 一字糟沉頭

Designation M 1.6 M2 M 2.5 M 3 (M3.5) M 4 M5 M6 M8 M 10
of threads (d)
Pitch (P) 0.35 0.40 0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50
a Max. 0.70 0.80 0.90 1.00 1.20 1.40 1.60 2.00 2.50 3.00
b Min. 25.00 25.00 25.00 25.00 38.00 38.00 38.00 38.00 38.00 38.00
dk Maximum theoretical 3.6 4.40 5.50 6.30 8.20 9.40 10.40 12.60 17.30 20.00
dimension
Actual Nominal=Max. 3.00 3.80 4.70 5.50 7.30 8.40 9.30 11.30 15.80 18.30
dimen- Min. 2.7 3.50 4.40 5.20 6.94 8.04 8.94 10.87 15.37 17.78
sion
k Nominal=Max. 1 1.20 1.50 1.65 2.35 2.70 2.70 3.30 4.65 5.00
n Nominal 0.4 0.50 0.60 0.80 1.00 1.20 1.20 1.60 2.00 2.50
Max. 0.6 0.70 0.80 1.00 1.20 1.51 1.51 1.91 2.31 2.81
39

Min. 0.46 0.56 0.66 0.86 1.06 1.26 1.26 1.66 2.06 2.56
t Max. 0.5 0.60 0.75 0.85 1.20 1.30 1.40 1.60 2.30 2.60
Min. 0.32 0.40 0.5 0.6 0.90 1.00 1.10 1.20 1.80 2.00
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Oval Head

JIS B 1101
Slotted Drive of Oval Head 一字糟扁圓沉頭 unit : mm
Designation of threads M 1.6 M2 M 2.5 M 3 (M3.5) M 4 M5 M6 M8 M 10
(d)
Pitch (P) 0.35 0.40 0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50

a Max. 0.70 0.80 0.9 1 1.20 1.40 1.60 2.00 2.50 3.00

b Min. 25.00 25.00 25.00 25.00 38.00 38.00 38.00 38.00 38.00 38.00

dk Maximum theoretical 3.60 4.40 5.50 6.30 8.20 9.40 10.40 12.60 17.30 20.00
dimension
Actual
dimen-
Nominal=Max 3.00 3.80 4.70 5.50 7.30 8.40 9.30 11.30 15.80 18.30
sion
Min. 2.70 3.50 4.40 5.20 6.94 8.04 8.94 10.87 15.37 17.78

f Approx. 0.40 0.50 0.60 0.70 0.80 1.00 1.20 1.40 2.00 2.30
Shing Hing Industrial Limited - FASTENERS HANDBOOK

k Nominal=Max 1.00 1.20 1.50 1.65 2.35 2.70 2.70 3.30 4.65 5.00

n Nominal 0.40 0.50 0.60 0.80 1.00 1.20 1.20 1.60 2.00 2.50

Max. 0.60 0.70 0.80 1.00 1.20 1.51 1.51 1.91 2.31 2.81

Min. 0.46 0.56 0.66 0.86 1.06 1.26 1.26 1.66 2.06 2.56
t Max. 0.80 1.00 1.20 1.45 1.70 1.90 2.40 2.80 3.70 4.40

Min. 0.64 0.80 1.00 1.20 1.40 1.60 2.00 2.40 3.20 3.80
40
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Cheese Head

JIS B 1101
Slotted Drive of Cheese Head 一字糟棋子頭 unit : mm
Designation of threads M 1.6 M2 M 2.5 M3 (M3.5) M4 M5 M6 M8 M 10
(d)

Pitch (P) 0.35 0.40 0.45 0.50 0.60 0.70 0.80 1.00 1.25 1.50

a Max. 0.70 0.80 0.90 1.00 1.20 1.40 1.60 2.00 2.50 3.00

b Min. 25.00 25.00 25.00 25.00 38.00 38.00 38.00 38.00 38.00 38.00

dk Nominal=Max. 3.00 3.80 4.50 5.50 6.00 7.00 8.50 10.00 13.00 16.00

Min. 2.86 3.62 4.32 5.32 5.82 6.78 8.28 9.78 12.73 15.73

da Max. 2.00 2.60 3.10 3.60 4.10 4.70 5.70 6.80 9.20 11.20

k Nominal=Max. 1.10 1.40 1.80 2.00 2.40 2.60 3.30 3.90 5.00 6.00

Shing Hing Industrial Limited - FASTENERS HANDBOOK

Min. 0.96 1.26 1.66 1.86 2.26 2.46 3.12 3.60 4.70 5.70

n Nominal 0.40 0.50 0.60 0.80 1.00 1.20 1.20 1.60 2.00 2.50

Max. 0.60 0.70 0.80 1.00 1.20 1.51 1.51 1.91 2.31 2.81

Min. 0.46 0.56 0.66 0.86 1.06 1.26 1.26 1.66 2.06 2.56

r Min. 0.10 0.10 0.10 0.10 0.10 0.20 0.20 0.25 0.40 0.40

t Min. 0.45 0.60 0.70 0.85 1.00 1.10 1.30 1.60 2.00 2.40
w Min. 0.40 0.50 0.70 0.75 1.00 1.10 1.30 1.60 2.00 2.40
x Max. 0.90 1.00 1.10 1.25 1.50 1.75 2.00 2.50 3.20 3.80
41
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Truss Head

Slotted Drive of Truss Head 一字糟扁圓頭

JIS B1101
unit : mm
Designation
of threads M2 (M 2.2) M 2.5 M3 (M3.5) M4 (M 4.5) M5 M6 M8
(d)

Pitch (P) 0.40 0.45 0.45 0.50 0.60 0.70 0.75 0.80 1.00 1.25

dk Basic size 4.50 5.00 5.70 6.90 8.10 9.40 10.60 11.80 14.00 17.80
Permissible 0 0 0 0 0
deviation -0.4 -0.5 -0.6 -0.7 -0.8

k Basic size 1.20 1.30 1.50 1.90 2.20 2.50 2.80 3.10 3.70 4.80
Permissible
±0.10 ±0.15 ±0.20
deviation
Shing Hing Industrial Limited - FASTENERS HANDBOOK

n Basic size 0.60 0.60 0.80 0.80 1.00 1.00 1.00 1.20 1.20 1.60
Permissible + 0.1 + 0.15 +0.2
deviation 0 0 0
t Basic size 0.60 0.65 0.75 0.95 1.10 1.25 1.40 1.60 1.90 2.40
Permissible
deviation ±0.10 ± 0.15 ±0.20 ±0.25 ±0.30 ±0.40
42
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Binding Head

Slotted Drive of Binding Head 一字糟盤圓頭

JIS B1101
unit : mm

Designation
of threads M2 (M 2.2) M 2.5 M3 (M3.5) M4 (M 4.5) M5 M6 M8
(d)

Pitch (P) 0.40 0.45 0.45 0.50 0.60 0.70 0.75 0.80 1.00 1.25

dk Basic size 4.30 4.70 5.30 6.30 7.30 8.30 9.30 10.30 12.40 16.40

Permissible 0 0 0 0 0
deviation -0.4 -0.5 -0.6 -0.7 -0.8
k About 0.85 0.90 1.00 1.30 1.50 1.70 1.90 2.10 2.40 3.10

f Basic size 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.30 1.70

Shing Hing Industrial Limited - FASTENERS HANDBOOK

Permissible ±0.2
±0.10 ±0.15
deviation

n Basic size 0.60 0.60 0.80 0.80 1.00 1.00 1.00 1.20 1.20 1.60
Permissible +0.15 +0.2
deviation 0 0
t Basic size 0.65 0.70 0.80 1.00 1.15 1.30 1.50 1.70 2.00 2.80
Permissible ±0.10 ±0.15 ±0.2 ±0.25 ±0.3 ±0.5
deviation
43
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Round Head

Slotted Drive Round Head 一字糟圓頭

JIS B 1101
unit : mm
Designation
of threads M 1 M1.2 (M 1.4) M 1.6 M 2 (M 2.2) M2.5 M 3 (M 3.5) M 4 (M 4.5) M5 M6 M8
(d)

Pitch (P) 0.25 0.25 0.30 0.35 0.40 0.45 0.45 0.50 0.60 0.70 0.75 0.80 1.00 1.25

dk Basic 2.00 2.30 2.60 3.00 3.50 4.00 4.50 5.50 6.00 7.00 8.00 9.00 10.50 14.00
size

Per- 0 0 0 0 0 0
misible
-0.3 -0.4 -0.5 -0.6 -0.7 -0.8
deviation
Shing Hing Industrial Limited - FASTENERS HANDBOOK

k Basic 0.80 0.90 1.00 1.10 1.30 1.50 1.70 2.00 2.30 2.60 3.00 3.40 4.00 5.40
size

Per-
misible ±0.10 ±0.15 ±0.20
deviation

n Basic 0.32 0.32 0.32 0.40 0.60 0.60 0.80 0.80 1.00 1.00 1.00 1.20 1.20 1.60
size

Per-
misible +0.1 +0.15 +0.2
deviation 0 0 -0

t Basic 0.45 0.50 0.60 0.65 0.80 0.90 1.00 1.20 1.40 1.60 1.90 2.10 2.50 3.30
size

Per-
misible ±0.10 ±0.15 ±0.2 ±0.25 ±0.3 ±0.4 ±0.5
deviation
44
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Pan Head

Binding Head

Slotted Drive 一字糟 ANSI B18.6.3 1972

unit : inch
Pan Head Binding Head
Nominal Size or J T J T
Basic Screw Diameter Slot Width Slot Depth Slot Width Slot Depth
Max Min Max Min Max Min Max Min

0000 0.0210 0.008 0.004 0.008 0.004 0.008 0.004 0.009 0.005
000 0.0340 0.012 0.008 0.012 0.008 0.012 0.006 0.013 0.009
00 0.0470 0.017 0.010 0.016 0.010 0.017 0.010 0.018 0.012
0 0.0600 0.023 0.016 0.022 0.014 0.023 0.016 0.018 0.009
#1 0.0730 0.026 0.019 0.027 0.018 0.026 0.019 0.024 0.014
#2 0.0860 0.031 0.023 0.031 0.022 0.031 0.023 0.030 0.020

Shing Hing Industrial Limited - FASTENERS HANDBOOK

#3 0.0990 0.035 0.027 0.036 0.026 0.035 0.027 0.036 0.025
#4 0.1120 0.039 0.031 0.040 0.030 0.039 0.031 0.042 0.030
#5 0.1250 0.043 0.035 0.045 0.034 0.043 0.035 0.048 0.035
#6 0.1380 0.048 0.039 0.050 0.037 0.048 0.039 0.053 0.040
#8 0.1640 0.054 0.045 0.058 0.045 0.054 0.045 0.065 0.050
#10 0.1900 0.060 0.050 0.068 0.053 0.060 0.050 0.077 0.060
#12 0.2160 0.067 0.056 0.077 0.061 0.067 0.056 0.089 0.070
1/4 0.2500 0.075 0.064 0.087 0.070 0.075 0.064 0.105 0.084
5/16 0.3125 0.084 0.072 0.106 0.085 0.084 0.072 0.134 0.108
3/8 0.3750 0.094 0.081 0.124 0.100 0.094 0.081 0.163 0.132
7/16 0.4375 0.094 0.081 0.142 0.116 - - - -
1/2 0.5000 0.106 0.091 0.161 0.131 - - - -
9/16 0.5625 0.118 0.102 0.179 0.146 - - - -
45

5/8 0.6250 0.133 0.116 0.197 0.162 - - - -

3/4 0.7500 0.149 0.131 0.234 0.192 - - - -
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Truss Head

Oval Head

Slotted Drive 一字糟 ANSI B 18.6.3 1972

unit : inch
Truss Head Oval Head
Nominal Size or J T J T
Basic Screw Diameter Slot Width Slot Depth Slot Width Slot Depth
Max. Min. Max Min. Max. Min. Max. Min.

0000 0.0210 0.009 0.005 0.009 0.005 - - - -

000 0.0340 0.013 0.009 0.013 0.009 - - - -
00 0.0470 0.017 0.010 0.018 0.012 0.017 0.010 0.023 0.016
0 0.0600 0.023 0.016 0.022 0.014 0.023 0.016 0.030 0.025
#1 0.0730 0.026 0.019 0.027 0.018 0.026 0.019 0.038 0.031
Shing Hing Industrial Limited - FASTENERS HANDBOOK

#2 0.0860 0.031 0.023 0.031 0.022 0.031 0.023 0.045 0.037

#3 0.0990 0.035 0.027 0.036 0.026 0.035 0.027 0.052 0.043
#4 0.1120 0.039 0.031 0.040 0.030 0.039 0.031 0.059 0.049
#5 0.1250 0.043 0.035 0.045 0.034 0.043 0.035 0.067 0.055
#6 0.1380 0.048 0.039 0.050 0.037 0.048 0.039 0.074 0.060
#8 0.1640 0.054 0.045 0.058 0.045 0.054 0.045 0.088 0.072
#10 0.1900 0.060 0.050 0.068 0.053 0.060 0.050 0.103 0.084
#12 0.2160 0.067 0.056 0.077 0.061 0.067 0.056 0.117 0.096
1/4 0.2500 0.075 0.064 0.087 0.070 0.075 0.064 0.136 0.112
5/16 0.3125 0.084 0.072 0.106 0.085 0.084 0.072 0.171 0.141
3/8 0.3750 0.094 0.081 0.124 0.100 0.094 0.081 0.206 0.170
7/16 0.4375 0.094 0.081 0.142 0.116 0.094 0.081 0.210 0.174
1/2 0.5000 0.106 0.091 0.161 0.131 0.106 0.091 0.216 0.176
46

9/16 0.5625 0.118 0.102 0.179 0.146 0.118 0.102 0.250 0.207
5/8 0.6250 0.133 0.116 0.196 0.162 0.133 0.116 0.285 0.235
3/4 0.7500 0.149 0.131 0.234 0.182 0.149 0.131 0.353 0.293
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Flat Head

Fillister Head

Slotted Drive 一字糟 ANSI B 18.6.3 1972

unit : inch
Flat Head Fillister Head
Nominal Size or J T J T
Basic Screw Diameter Slot Width Slot Depth Slot Width Slot Depth
Max. Min. Max. Min.

0000 0.0210 0.008 0.004 0.007 0.003 0.008 0.004 0.012 0.006
000 0.0340 0.011 0.007 0.009 0.005 0.012 0.006 0.017 0.011
00 0.0470 0.017 0.010 0.014 0.009 0.017 0.010 0.022 0.015
0 0.0600 0.023 0.016 0.015 0.010 0.023 0.016 0.025 0.015
#1 0.0730 0.026 0.019 0.019 0.012 0.026 0.019 0.031 0.020
#2 0.0860 0.031 0.023 0.023 0.015 0.031 0.023 0.037 0.025

Shing Hing Industrial Limited - FASTENERS HANDBOOK

#3 0.0990 0.035 0.027 0.027 0.017 0.035 0.027 0.043 0.030
#4 0.1120 0.039 0.031 0.030 0.020 0.039 0.031 0.048 0.035
#5 0.1250 0.043 0.035 0.034 0.022 0.043 0.035 0.054 0.040
#6 0.1380 0.048 0.039 0.038 0.024 0.048 0.039 0.060 0.045
#8 0.1640 0.054 0.045 0.045 0.029 0.054 0.045 0.071 0.054
#10 0.1900 0.060 0.050 0.053 0.034 0.060 0.050 0.083 0.064
#12 0.2160 0.067 0.056 0.060 0.039 0.067 0.056 0.094 0.074
1/4 0.2500 0.075 0.064 0.070 0.046 0.075 0.064 0.109 0.087
5/16 0.3125 0.084 0.072 0.088 0.058 0.084 0.072 0.137 0.110
3/8 0.3750 0.094 0.081 0.106 0.070 0.094 0.081 0.164 0.133
7/16 0.4375 0.094 0.081 0.103 0.066 0.094 0.081 0.170 0.135
1/2 0.5000 0.106 0.091 0.103 0.065 0.106 0.091 0.190 0.151
47

9/16 0.5625 0.118 0.102 0.120 0.077 0.118 0.102 0.214 0.172
5/8 0.6250 0.133 0.116 0.137 0.088 0.133 0.116 0.240 0.193
3/4 0.7500 0.149 0.131 0.171 0.111 0.149 0.131 0.281 0.226
 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Hexagonal Socket of Button Head

Hexagonal Socket of Button Head 內六角扁圓頭

JIS B1174
unit : mm
Thread size (d)
M3 M4 M5 M6 M8 M 10 M 12 M 16
Pitch of screw thread (P)
0.5 0.7 0.8 1 1.25 1.5 1.75 2

a Max. 1 1.4 1.6 2 2.5 3 3.5 4

Min. 0.5 0.7 0.8 1 1.25 1.5 1.75 2

da Max. 3.6 4.7 5.7 6.8 9.2 11.2 13.7 17.7

dk Max. (reference 5.7 7.6 9.5 10.5 14 17.5 21 28

dimension)
Min. 5.4 7.24 9.14 10.07 13.57 17.07 20.48 27.48
Shing Hing Industrial Limited - FASTENERS HANDBOOK

e Min. 2.3 2.87 3.44 4.58 5.72 6.86 9.15 11.43

(reference
k Max. dimension) 1.65 2.2 2.75 3.3 4.4 5.5 6.6 8.8

Min. 1.4 1.95 2.5 3 4.1 5.2 6.24 8.44

(reference
s Nominal dimension) 2 2.5 3 4 5 6 8 10

Max. 2.045 2.56 3.08 4.095 5.095 6.095 8.115 10.115

Min. 2.02 2.52 3.02 4.02 5.02 6.02 8.025 10.025

t Min. 1.04 1.3 1.56 2.08 2.6 3.12 4.16 5.2

w Min. 0.2 0.3 0.38 0.74 1.05 1.45 1.63 2.25

48
SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Hexagon Socket Head Cap 內六角杯頭 JIS B1176

unit : mm

Seminal designation of
srew thread M 1.6 M2 M 2.5 M3 M4 M5 M6 M8
(d)
Pitch of screw thread (P) 0.35 0.4 0.45 0.5 0.7 0.8 1 1.25

b Reference 15 16 17 18 20 22 24 28

dk Max. (Basic size) 3 3.8 4.5 5.5 7 8.5 10 13

Max. 3.14 3.98 4.68 5.68 7.22 8.72 10.22 13.27

Min. 2.86 3.62 4.32 5.32 6.78 8.28 9.78 12.73

da Max. 2 2.6 3.1 3.6 4.7 5.7 6.8 9.2

Shing Hing Industrial Limited - FASTENERS HANDBOOK

ds Max. (Basic size) 1.6 2 2.5 3 4 5 6 8

Min. 1.46 1.86 2.36 2.86 3.82 4.82 5.82 7.78

e Min. 1.73 1.73 2.3 2.87 3.44 4.58 5.72 6.86

k Max. (Basic size) 1.6 2 2.5 3 4 5 6 8

Min. 1.46 1.86 2.36 2.86 3.82 4.82 5.7 7.64

Nominal designation
s (Basic size)
1.5 1.5 2 2.5 3 4 5 6

Min. 1.52 1.52 2.02 2.52 3.02 4.02 5.02 6.02

Max. (14) 1 Column 1.560 1.560 2.060 2.580 3.080 4.095 5.140 6.140

2 Column 1.545 1.545 2.045 2.56 3.08 4.095 5.095 6.095

t Min. 0.7 1 1.1 1.3 2 2.5 3 4

dw Min. 2.72 3.4 4.18 5.07 6.53 8.03 9.38 12.33

49

w Min. 0.55 0.55 0.85 1.15 1.4 1.9 2.3 3.3

 SCREW INSERTS http://www.shing-hing.com.hk
Tel:(852)2896 0391 Fax:(852)2897 0357
螺絲槽型

Torx and TX Tamper Resistant 梅花、梅花針糟

Pan Flat Socket Head Socket Button Truss Fillister

inch metric inch metric inch metric inch metric inch metric inch
T1 _ M0.9 _ M0.9 & M1.0 _ M0.9 _ _ _ _ _ T2
_ M1.0 _ M1.2 _ M1.2 _ _ _ _ _

T3 _ M1.2 _ M1.4 _ M1.2 _ _ _ _ _

T4 _ _ _ _ _ _ _ _ _ _ _ T5

#0 M1.4 & M1.6 #1 M1.6 & M1.8 _ M1.4 & M1.6 #1 _ _ _ _

T6 #1 M1.8 & M2 #2 M2 #0 M1.8 _ _ _ _ _

T7 _ _ _ _ #1 _ #3 _ #2 _ #1
T8 #2 & #3 M2.5 #3 & #4 M2.5 #2 & #3 M2.0 & M2.5 #4 M3 #3 _ #2
T9 _ _ _ _ _ _ _ _ #4 _ #3
T10 #4 & #5 M3 #5 & #6 M3 #4 & #5 M3 #5 & #6 M3.5 #5 & #6 M3.5 #4 & #5
Shing Hing Industrial Limited - FASTENERS HANDBOOK

T15 #6 M3.5 #8 M3.5 #6 M3.5 #8 M4 #8 M4 #6

T20 #8 M4 #10 M4 _ _ _ _ #10 M5 #8
T25 #10 M5 #12 M5 #8 M4 #10 M5 #12 _ #10
T27 #12 _ “1/4” _ #10 M4.5 & M5 “1/4” M6 “1/4” _ #12
T30 “1/4” M6 “5/16” M6 “1/4” M6 _ _ _ M6 “1/4”
T40 “5/16” M8 “3/8” M8 _ M7 “5/16” M8 “5/16” M8 “5/16”
T45 “3/8” _ “7/16” _ “5/16” M8 “3/8” M10 “3/8”” & 7/16” _ “3/8”
T50 “7/16” M10 “1/2” M10 “3/8” M10 _ _ “1/2” M10 “7/16”
T55 “1/2” _ “9/16”& 5/16” _ “7/16”& 1/2” M12 “1/2” M12 & M14 “9/16”& 5/8” M12 “1/2”& 9/16”
T60 _ _ “3/4” _ “9/16””” M14 “5/8” M16 “3/4” _ “5/8”
T70 _ _ _ _ “5/8” M16 _ _ _ _ “3/4”
T80 _ _ _ _ _ M18 _ _ _ _ _
_ _ _ _ _ _ _ _ _
50

T90 “3/4” M20

T100 _ _ _ _ “7/8” & 1” M22 & M24 _ _ _ _ _