Iso Code PDF
Iso Code PDF
international design codes that are used on global oil and gas
construction projects. These codes and standards are referred to
and used in Engineering, Procurement and Construction projects.
2. QA/QC ISO 10005 2000 Quality Management System Guidelines for Quality Plans
3. QA/QC ISO 9004 2000 Quality Management Systems – Guidelines for Performance
Improvements
5. MEC ISO 261 ISO General Purpose Metric Screw Threads – General Plan
www.qcskills.com
6. Inst/Ele ISO 3266 Eyebolts for general lifting purposes
7. Inst/Ele ISO 3864-1 Safety colours and safety signs – Part 1: Design Principles for
devices – Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section
12. Inst/Ele ISO 5210 Industrial valves: Multi-turn valve actuator attachments
13. Inst/Ele ISO 5211 Industrial Valves Part-turn valve actuator attachment
14. Others ISO 6385 1981 Ergonomics Principles in the Design of Work System
15. MEC ISO 68-1 ISO General purpose screw threads – Basic profile -Part 1:
16. MEC ISO 724 ISO General-purpose metric screw threads – Basic dimensions
17. MEC ISO 7507-1 Petroleum and Liquid Petroleum Products – Calibration of
www.qcskills.com
18. Inst/Ele ISO 8310 Refrigerated Light Hydrocarbon liquid/ Measurement of
thermocouples
19. Coating ISO 8504-2 Preparation of steel substrates before application of paints and
20. Coating ISO 8504-3 Preparation of steel substrates before application of paints and
related products- Surface preparation methods – Part 3: Hand- and power-tool cleaning
21. Coating ISO 8501-1 Preparation of Steel substrates before application of paints and
related products – Visual assessment of surface cleanliness – Part 1: Rust grades and
preparation grades of uncoated steel substrates and of steel substrates after overall removal of
previous coatings.
photographic examples of the change of appearance imparted to steel when blast-cleaned with
different abrasives.
23. Coating ISO 8503-1 Preparation of Steel substrates before application of paints and
24. Coating ISO 8503-2 Preparation of Steel substrates before application of paints and
www.qcskills.com
25. Coating ISO 8503-3 Preparation of Steel substrates before application of paints and
26. Coating ISO 8503-4 Preparation of Steel substrates before application of paints and
27. QA/QC ISO 9000 2000 Quality Management Systems – Fundamentals & Vocabulary
29. CVL ISO 10479 Steel and Steel Products – Inspection Documents
30. Coating BS BS 7079 Preparation of steel substrates before application of paints and
related products
35. CVL AISC M016 Specification for the design, fabrication and erection of
36. CVL AISC M016 Code of Standard Practice for Steel Buildings and Bridges
www.qcskills.com
37. CVL AISC M016 Specification for Structural Joints Using ASTM A325 or A490
Bolts
38. CVL AISC M016 Allowable Stress Design of Simple Shear Connections
40. Others ANSI S 1.13 Method for the Measurement of Sound Pressure Levels in Air
41. Others API Publish 2218 Fireproofing Practice in Petroleum and Petrochemical
Processing Plants
42. Others API Publish 2510A Fire-Protection Considerations for the Design and
43. Others API RP 1102 Steel Pipelins Crossing Railfoads and Highways
44. Others API RP 14C Recommended practice for Analysis, Design, Installation and
45. Inst/Ele API RP 520 Part I Sizing, Selection, and Installation of Pressure-Relieving
46. Inst/Ele API RP 520 Part II Sizing, Selection, and Installation of Pressure-Relieving
47. Inst/Ele API RP 521 Guide for Pressure-Relating and Depressurizing System
49. MEC API Spec.6D 2002 Pipeline Valves (Gate, Ball and Check Valves)
www.qcskills.com
50. MEC API STD 2000 Venting Atmospheric and Low-pressure Storage Tanks:
51. MEC API STD 2510 2001 Design and Construction of LPG Installations 8th
Eddition
52. MEC API STD 526 Flanged Steel Pressure Safety Valves
53. MEC API STD 527 Commercial Seat Tightness of Safety Relief Valves with
54. MEC API STD 594 Check Valves: Wafer, Wafer-Lug, and Double Flanged
Type
56. MEC API STD 600 Bolted Bonnet Steel Gate valves for Petroleum and
57. MEC API STD 602 Compact Steel Gate Valves – Flanged, Threaded,
58. MEC API STD 607 Fire Test for Soft-Seated Quarter-Turn Valves
59. MEC API STD 609 Butterfly Valves: double Flanged, Lug, and Wafer Type
60. MEC API STD 610 1995 Centrifugal Pumps for General Process Services
61. MEC API STD 611 1997 General Purpose Steam Turbines for Petroleum,
www.qcskills.com
62. MEC API STD 613 1995 Special Purpose Gear Units for Petroleum, Chemical and
63. MEC API STD 614 1999 Lubrication, Shaft-Sealing, and Control Oil Systems and
64. MEC API STD 616 1992 Type H Industrial Combustion Gas Turbines for the
65. MEC API STD 617 1992 Axial and Centrifugal Compressors and Expander-
compressors for Petroleum, Chemical and Gas Industry Services – for General Refinery Service
66. MEC API STD 619 1997 Rotary-Type Positive Displacement Compressors for
67. MEC API STD 650 Welded Steel Tanks for Oil Storage
68. MEC API STD 661 4th Air Cooled Heat Exchanger for General Refinery Services
69. MEC API STD 662 1st Plate Heat Exchangers for General Refinery Services
70. MEC API STD 670 2000 Machinery Protection Systems – Vibration, Axial-
71. MEC API STD 671 1998 Special-Purpose Couplings for Petroleum, Chemical and
72. MEC API STD 672 1996 Packaged, Integrally Geared, Centrifugal Air
www.qcskills.com
73. MEC API STD 675 1994 Positive Displacement Pumps – Controlled Volume
74. MEC API STD 676 1994 Positive Displacement Pump – Rotary
75. MEC API STD 677 1997 General-purpose Gear Units for Petroleum, Chemical
76. MEC API STD 682 1994 Pumps – Shaft Sealing Systems for Centrifugal and
Rotary Pumps
77. CVL ASCE 40265 Design of Blast Resistant Buildings in Petrochemical Facilities
78. CVL ASCE 7-98 Minimum Design Loads for Buildings and Other Structures
79. CVL ASHRAEIndex American Society of Heating, Refrigerating and Air Conditioning
82. MEC ASME B 16.10 Face-To-Face and End-To-End Dimensions fo Ferrous Valves
83. MEC ASME B 16.11 Forged Fitting, socket – Welding and Threaded
85. MEC ASME B 16.21 Nonmetallic Flat Gaskets for Pipe Flanges
87. MEC ASME B 16.28 Wrought Steel Butt-welding Short Radius Elbow and Return
www.qcskills.com
89. MEC ASME B 16.34 Valve-Flanged, Threaded, and Welding End
91. MEC ASME B 16.47 Large Diameter Steel Flanges: NPS 2 through NPS 60
96. MEC ASME B 18.2.1 Square and Hex Bolts and Screws (Inch Series)
98. MEC ASME B 18.2.2 Square and Hex Nuts (Inch Series)
100. MEC ASME B 36.10M Welded and Seamless Wrought Steel Pipe
102. MEC ASME B 46.1 Surface Texture (Surface Roughness, Waviness, and Lay)
103. MEC ASME B 73.1 Specification for Horizontal, End Suction Centrifugal
105. MEC ASME PTC 4 Fired Steam Generators – Boiler Performance Test Code
www.qcskills.com
106. MEC ASME PTC 4.4 Gas Turbine Heat Recovery System GeneratorsTest
Code
110. MEC ASME S0010ADDENDA Boiler & Pressure Vessel Code – Power
Boiler
111. MEC ASME S0002C Specification for Welding Rods, Electrodes, and Filler
Metals
113. MEC ASME S0002CADENDA Specification for Welding Rods, Electrodes, and
Filler Metals
114. MEC ASME S090W2 Qualification Standard for Welding and Brazing
116. MEC ASME S00090ADENDA Qualification Standard for Welding and Brazing
www.qcskills.com
119. MEC ASME SO81I2 Interpretations Volume 51
124. MEC ASME S00082ADENDA Boiler & Pressure Vessel Code – Pressure
Vessels
126. MEC ASTM Annual Book 1.01 Annual Books of ASTEM Standard Steel
127. MEC ASTM Annual Book 1.02 Annual Books of ASTEM Standard
128. MEC ASTM Annual Book 1.03 Annual Books of ASTEM Standard Steel
129. MEC ASTM Annual Book 1.04 Annual Books of ASTEM Standard Steel
130. MEC ASTM Annual Book 1.05 Annual Books of ASTEM Standard Steel
www.qcskills.com
131. MEC ASTM Annual Book 1.06 Annual Books of ASTEM Standard
132. MEC ASTM Annual Book 2.01 Annual Books of ASTEM Standard
133. MEC ASTM Annual Book 2.02 Annual Books of ASTEM Standard
134. MEC ASTM Annual Book 2.04 Annual Books of ASTEM Standard
Nonferrous Metals – Nickel, Cobalt, Lead, Tin, Zinc, Cadmium, Precious, Reactive, Refractory
Metals And Alloys; Materials For Thermostats, Electrical Heating And Resistance, Contacts, And
Connectors
Acoustics
136. CVL ASTM C150 – 02a Standard specification for Portland cement
137. CVL ASTM C33 – 02a Standard specification for concrete aggregates
138. CVL ASTM D 1143 Standard method of testing piles under static axial
compressive load
www.qcskills.com
140. CVL ASTM D 1556 – 00 Standard test methods for density of soil in
142. CVL ASTM D 2665 – 02a Specification for Poly(Vinyl Chloride) (PVC)
143. Inst/Ele ASTM D 3359 – 02 Standard test methods for measuring adhesion
by tape test
144. CVL ASTM D 3966 – 90 Standard method of testing piles under lateral
loads
145. Inst/Ele ASTM D 4239 – 02 Standard test methods for sulfur in analysis
sample of coal and coke using high temperature tube furnace combustion method
146. Inst/Ele ASTM D 5142 – 02 Standard test methods for proximate analysis of
147. Others ASTM D 5402 – 93 Standard Practice for Assessing the Solvent
148. MEC ASTM E 165 – 02 Standard Test Method For Liquid Penetrant
Examination
www.qcskills.com
150. Others ASTM E 84 Surface Burning Characteristics of Building Materials
152. MEC AWS A 5.1 – 91 Specification for Carbon Steel Electrodes for
155. MEC AWS A 5.16 – 90 Specification for Titanium and Titanium Alloy
158. MEC AWS A 5.20-95 Specification for Carbon Steel Electrodes for
www.qcskills.com
160. MEC AWS A 5.28-96 Specification for Low Alloy Steel Electrodes and
161. MEC AWS A 5.4-92 Specification for Stainless Steel Electrodes for
162. MEC AWS A 5.5-96 Specification for Low-Alloy Steel Electrodes for
163. MEC AWS A 5.6-84 Specification for Covered Copper and Copper
164. MEC AWS A 5.7-84 Specification for Copper and Copper Alloy Bare
165. MEC AWS A 5.9-93 Specification for Bare Stainless Steel Welding
Standards
168. MEC AWWA C 209-00 Cold-Applied Tape Coatings for the Exterior of
170. MEC AWWA M 11 Steel Pipe- A Guide for Design and Installation
www.qcskills.com
171. MEC BS 1041-5:1998 Temperature Measurement – Part 5: Guide to
176. CVL BS 1377 Part 1:1990 Methods of test for soils for civil
engineering purposes
178. CVL BS 1377 Part 2:1990 Methods of test for soils for civil
engineering purposes
179. CVL BS 1377 Part 3:1990 Amendment No.1 Methods of test for
180. CVL BS 1377 Part 4:1990 Methods of test for soils for civil
engineering purposes
181. CVL BS 1449 Part 2: 1983 Stainless and Heat-Resisting Steel Plate,
www.qcskills.com
182. Inst/Ele BS 1591 : 1975 Specification for corrosion resisting high silicon
iron castings
185. Inst/Ele BS 1853 Part 2:1995 Fluorescent lamps for general lighting
service
186. Others BS 336 : 1989 Fire Hose Couplings and Ancillary Equipment
187. Inst/Ele BS 3463 : 1975 Specification for observation and gauge glasses
189. Inst/Ele BS 4161 Part 6:1987 Gas Meters, Specification for Rotating
circuit breakers
191. CVL BS 10137-1: 1996 Plates abd wide flats made of high strength
www.qcskills.com
192. CVL BS 4449 : 1997 Specification for carbon steel bars for the
reinforcement of concrete
193. CVL BS 4483 : 1998 Steel fabric for the reinforcement of concrete
195. Inst/Ele BS 4683 Part 1:1971 Specification for electrical apparatus for
explosive atmospheres
196. Inst/Ele BS 476 P31.1:1983 Fire tests on building materials and structures
198. Inst/Ele BS 476 P33: 1993 Fire tests on building materials and structures
203. Inst/Ele BS 5308 P2: 1986 Instrumentation Cables Part 2: Specification for
www.qcskills.com
205. Inst/Ele BS EN-60079-14:1997 Electrical apparatus for explosive gas
atmospheres Part 14: Electrical installations in hazardous areas (other than mines)
including fire safety sign – Part 5: Signs with specific safety meanings
208. “ “Safety signs and color Part 2 specification for colorimetric and
209. “
materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature
engines: Performance. Part1: Standard reference conditions, declarations of power, fuel and
www.qcskills.com
214. Others BS 5839-1:2002 Fire Detection and Fire Alarm Systems for
Buildings – Part 1: Code of practice for system design, installation, commissioning and
maintenance
217. Inst/Ele BS 6351 Part 2: 1983 Electric surface heating – Part 2. Guide
and cords
220. MEC BS 6364 : 1984 Specification for Valves for Cryogenic Serive
221. Others BS 6374 P4: 1984 Lining of equipment with polymeric materials
for the process industries – Part4 : Specification for lining with cold curing thermosetting resins.
222. CVL BS 6399 Part 2:1997 Loading for buildings – Part 2: Code of
www.qcskills.com
223. Inst/Ele BS 6622: 1999 Specification for cables with extruded cross-
linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV
up to 19/33 k V
226. Inst/Ele BS 6746C: 1993 Colour chart for insulation and sheath of
electric cables
229. Inst/Ele BS 7361 P1: 1991 Cathodic protection. Part 1. Code of practice for
www.qcskills.com
233. Inst/Ele CECC 00110 Rule Of Procedure 10 – National Implementation Of
www.qcskills.com
242. Inst/Ele CECC 00111 P8 CENELEC Electronic Components Committee
Implementation (DNM)
www.qcskills.com
251. Inst/Ele CECC 00114 P6 CENELEC Electronic Components Committee
Analyser Systems
Documents
www.qcskills.com
261. Inst/Ele EN 50020 (BS) 2002 Electrical apparatus for potentially
265. Inst/Ele IEC 72-1 Dimensions and output series for rotating electrical
266. Inst/Ele IEC 60073 Basic And Safety Principles For Man-Machine Interface,
Marking And Identification – Coding Principles For Indication Devices And Actuators
270. Inst/Ele IEC 60079-4 Part 4: Method of test for ignition temperature
271. Inst/Ele IEC 60079-4A Part 4: Method of test for ignition temperature
www.qcskills.com
273. Inst/Ele IEC 60079-6 Part 6: Oil-immersion “o”
281. Inst/Ele IEC 60079-19 Part 19: Repair and overhaul for apparatus used
temperature
351: Insulating materials for shipboard and mobile and fixed offshore units, power,
www.qcskills.com
285. Inst/Ele IEC 617-1 Graphical symbols for diagrams. Part 1: General
earthing switches
289. Inst/Ele IEC 137 Insulated Bushing for alternating voltages above 1000V
www.qcskills.com
300. Inst/Ele IEC 61260 Octave, Half-Octave and Third-Octave Band Filters
Intended for the Analysus of Sound and Vibrations. Amendment 1 Electroacoustics – Octave-
305. Inst/Ele IEC 296 Specification for unused mineral insulating oils for
307. Inst/Ele IEC 298 AC metal enclosed switchgear and control gear for rated
310. Inst/Ele IEC 304 Standard colours for Insulation for Low Frequency
311. Inst/Ele IEC 60309-1 Specification for industrial plugs, socket outlets
www.qcskills.com
312. Inst/Ele IEC 60309-2 Specification for industrial plugs, socket outlets
and couplers for industrial purposes – Part 2: Dimensional interchangeability requirements for
5-1: Control circuit devices and switching elements – Electromechanical control circuit devices
314. Inst/Ele IEC 354 Loading guide for oil-immersed power transformers
316. Inst/Ele IEC 60381-1 Analogue Signals for Process Control Systems
317. Inst/Ele IEC 60381-2 Analogue Signals for Process Control Systems
319. Inst/Ele IEC 60417-1 Graphical symbols for use on equipment Part 1:
320. Inst/Ele IEC 60417-2 Graphical symbols for use on equipment Part 2:
Symbol originals
www.qcskills.com
323. Inst/Ele IEC 420 High-voltage alternating current switch-fuse
combinations
system
contactor-based motor-starters
327. Inst/Ele IEC 502 Extruded solid dielectric insulated power cables for
328. Inst/Ele IEC 521 Class 0.5, 1 and 2 Alternating current watthour meters
330. Inst/Ele IEC 60811-1-1 Common test methods for insulating and
sheathing materials of electric cables and optical cables – Part 1-1: Methods for general
application – Measurement of thickness and overall dimensions – Tests for determining the
mechanical properties
331. Inst/Ele IEC 551 Determination of transformer and reactor sound levels
www.qcskills.com
333. Inst/Ele IEC 60076-8 Application guide for power transformers
334. Inst/Ele IEC 616 Terminal and tapping markings for power transformers
335. Inst/Ele IEC 617-1 Graphical symbols for diagrams Part 1: General
1 kV a.c. and 1.2 kV d.c. – Part 1: Direct-on-line (full voltage) a.c. starters
337. Inst/Ele IEC 60644 High-voltage fuse-links for motor circuit applications
347. Inst/Ele IEC 60925 DC supplied electronic ballast for tubular fluorescent
www.qcskills.com
348. Inst/Ele IEC 60947-4-1 Low voltage switchgear and controlgear – Part
349. Inst/Ele IEC 60947-3 Low -voltage switchgear and controlgear – Part
requirements:
abbreviations
www.qcskills.com
356. Inst/Ele IEC 61508-6 Functional safety of
GROUNDING
363. MEC MSS SP 25 – 1998 Standard Marking System for Valves, Fittings,
364. MEC MSS SP 44 – 1996 2001 Steel Pipe Line Flanges (only for NPS 22″)
365. MEC MSS SP 53 – 1999 2002 Quality Standard for Stel Castings and Forgings
for Valves, Flanges and Fittings and Other Piping Components-Magnetic Particle Examination
Method
www.qcskills.com
366. MEC MSS SP 54 – 1999 2002 Quality Standard for Steell Casting for Valves,
Flanges and Fittings and Other Piping Components – Radiographic Examination Method
367. MEC MSS SP 55 – 2001 2001 Quality Standard for Steel Castings for Valves,
Flanges and Fittings and Other Piping Components – Visual Method for Evaluation of Surface
Irregularities
368. MEC MSS SP 72 1999 Ball Valves with Flanged or Butt-welding Ends for
General Service
369. MEC MSS SP 80 1997 Bronze gate, Globe, Angle and Check Valves
370. Others NFPA 10 1998 Standard for Portable Fire Extinguishers 2002 Edition
371. Others NFPA 11A 1999 Standard for Medium and High Expansion Form Systems
– 1999 Edition
372. Others NFPA 12 2000 Standard on Carbon Dioxide Extinguishing Systems 2000
Edition
373. CVL NFPA 12A Standard on Halon 1301 Fire Extinguishing Systems
1997 Edition
375. Others NFPA 15 2001 Standard for Water Spray Fixed Systems for Fire
www.qcskills.com
377. Others NFPA 24 1995 Standard for Installation of Private Fire Service Mains
378. Others NFPA 30 2000 Flammable and Combustible Liquids Code 2000 Edition
379. Others NFPA 59 2001 Utility LP-Gas Plant Code 2001 Edition
382. Others NFPA 72 1999 National Fire Alarm Code – 2002 Edition
383. MEC NFPA 85 Boiler and combustion Systems Hazard Code – 2001
Edition
386. CVL NFPA 90A Standard for the installation of Air Conditioning and
2000 Edition
Painting Steel Surfaces – Preparation of Steel Substrates before Application – 3rd Edition 1998
Association
www.qcskills.com
390. MEC TEMA 8th CD-ROM
391. Inst/Ele VDE 0278 P623 Power Cables Accessories With Rated Voltages
U Up To 30 Kv (Um To 36 Kv) – Specification For Joints, Stop Ends And Outdoor Terminations For
392. MEC WRC BUL 107 Welding Research Council Bulletin for Local
393. MEC WRC BUL 297 WRC Bulletin Supplement to WRC 107 – Local
394. CVL ACI 318 Building Code Requirements For Structural Concrete
pavement (Guide for Design of Jointed Concrete Pavements for Streets and Local Roads)
398. MEC API STD 620 Recommended Rules for Design and
www.qcskills.com
401. CVL IAPMO PLUMBING CODE Uniform Plumbing Code – 2000 Edition
403. CVL ICBO BUILDING CODE CD-ROM – Seismic Design Parameters Version
3.10
404. Inst/Ele IP PMM XII Sec.1 Static and Dynamic Measurement of Light
405. Inst/Ele IP PMM XII Sec.3 Static and Dynamic Measurement of Light
www.qcskills.com