FAQ in IDMS

Frequently Asked Questions For IDMS
Frequently Asked Questions for IDMS
Tata Consultancy Services

Seepz, Mumbai
Dec 2001
Author: Mainframe Center of Excellence
Any suggestions for update to this document can be sent at

[email protected]
Confidential Page 1 of 5
What is the difference between a schema and a subschema?

The schema is the physical arrangement of the data as it appears in the DBMS. The
subschema is the logical view of the data as it appears to the application program.
What is a region?
Region is used synonymously with area. It is group of logically contiguous pages.
What is a page?
A page is a smallest unit of storage in an IDMS database.
Explain the difference between record occurrence and record type?

A record occurrence is the instance of the record; it is the smallest addressable unit of data. A
record type is the description of record; there needn’t be any occurrences.
What is difference between the local and central version operating modes?
In local there is no IDMS system running above the DBMS. It’s the most efficient mode but
lacks the recovery and integrity facility of the central version (CV) control program. In CV
many application programs access the database through the single copy of the DBMS.
What is a run unit?

A run unit is a logical unit of work; it is analogous to a CICS task.
What is an OOK-Rec?
An OOK-Rec is one of a kind record set, used to get to another record set
What is a junction record?

A junction record is a member record type that allows for many-to-many relationship
between its two owner records. For a school database CLASS record is a junction for the
TEACHER and SUBJECT record types.
Name and explain the three location modes.

CALC is based on symbolic value, which is used to determine the target page. VIA modes is
for members only. VIA records are stored near their owners. In DIRECT mode the target is
specified by the user and is stored as close as possible to that page.
What is a set? What pointers are required, what are possible? How many sets be
ordered?
A set is an owner record and, optionally, its member record. There are three types of pointers
next, prior and owner, but only next is required. There are five possible orders for
arrangement of sets; first - insert at beginning, last - insert at end of set, next – insert after
current of set, prior to current of set and sorted - insert according to sort value.
What is the purpose of a READY?

The READY prepares a database area for access by DML functions.
What does a COMMIT statements do?

It writes a checkpoint to the journal file and releases any record locks.
What does a ROLLBACK do?

It rolls back (reverses) all database updates to the point of the last rollback or to the
beginning of the run unit.
What does a FINISH do?

It releases all database resources, terminates database processes, writes statistical
information to IDMS and logs the checkpoint.
What is the IDD?

IDD is integrated data dictionary. It contains information about the elements, record types,
Sets, maps and dialogues within the database.
What is meaning of the return codes 0307 and 0326?

0307 is end-of-set and 0326 is record not found.
What is the meaning of ‘Copy IDMS Sub-schema- binds’?

It generates a bind run-unit and binds all records for the sub-schema the program is
referencing.
What is autostatus?
Autostatus is a protocol mode which causes the expansion of each DML statement to
include a ‘perform IDMS-status’ statement.
What does a store statement do?

It places a record in the database based on the location mode specified.
What sets will the stored record connect to?

It will connect to all sets where it is defined as an automatic member. The store requires that
currency be established for all these set occurrences.
What is currency?
Currency is location within the database during run-unit execution. These are the four levels
of currency: current of run-unit is the record occurrence of last successful find or obtain;
current of record type is the most recent of each record type; current of record set is the
most recent within each set and current of area is within each area.
If the stored record is not defined as automatic of a set, how can it be stored as a
member of set.
Store the record then connect it to each set where it is a manual member.
So manual and automatic are the connect options for a set. What are the
disconnect options.
Mandatory and optional.
Distinguish among erase, erase permanent, erase selective and erase all.
Erase cancels the membership of a record in a specific set occurrences and removes only the
named record. Erase permanent removes the specific records and all mandatory occurrences
it owns. It disconnects all optional members. Erase selective removes the record, all
mandatory members and all optional members not connected to other sets. It disconnects
those that are connected. Erase all removes the specified record and all mandatory and
optional records it owns.
How does IDMS insure data integrity?

IDMS uses record locks to prevent another run-unit from updating the same record.
What are the types of record locks and how are they set?
Locks may be shared or exclusive. Shared means the other run-units can retrieve the record
but cannot modify it. Exclusive means that other run units can neither retrieve nor modify it.
Record locks may be implicit or explicit. Implicit locks are set in the ready statement usage
clause. Explicit locks are set using either the keep statement or keep option of the find/obtain
command.
How are record locks released?

Locks are released by the change in currency or by a commit, rollback or finish command.
What does a status return code of nn29 mean in relation to record locks?
nn29 means that two run units are waiting to set locks on the same record and in deadlock.
What is an area sweep and when is it used?

An area sweep accesses records on the basis of the physical location in a database area. It
can be record search of the area, or it can be of occurrences of records of a specific type.
Why would you use find and get rather than an obtain?
Find tells you whether the record is actually in the database. If it is not found you save the
overhead of an obtain.
When you are obtaining next within a set and get an end of set return code, on
what record are you now current?
You are current on the owner.
What is a bind?
A bind associates record type with the program work area; for run unit and records it is the
first command issued in the program.
How does IDMS communicate with CICS?

They communicate via service MVS request calls.
Is there an application program coding difference between local and central

version mode?
No. The mode is specified via the SYSCTL DD card in the JCL.
If you are current on the owner of a set, what is the difference between Obtain
next and Obtain First?
No difference. There is a difference between obtain first and obtain next for an area sweep,
but not when current on the owner in a set.

FAQ in IDMS

Uploaded by

Copyright:

Available Formats

FAQ in IDMS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FAQ in IDMS

Uploaded by

Copyright:

Available Formats

Frequently Asked Questions For IDMS

Frequently Asked Questions for IDMS

Tata Consultancy Services

Author: Mainframe Center of Excellence

Any suggestions for update to this document can be sent at

What is the difference between a schema and a subschema?

Explain the difference between record occurrence and record type?

What is a run unit?

What is a junction record?

Name and explain the three location modes.

What is the purpose of a READY?

What does a COMMIT statements do?

What does a ROLLBACK do?

What does a FINISH do?

What is the IDD?

What is meaning of the return codes 0307 and 0326?

What is the meaning of ‘Copy IDMS Sub-schema- binds’?

What does a store statement do?

What sets will the stored record connect to?

How does IDMS insure data integrity?

How are record locks released?

What is an area sweep and when is it used?

How does IDMS communicate with CICS?

Is there an application program coding difference between local and central

You might also like