Ref item No Sl.

No

DSR/18.7.2 1

DSR/18.7.3 2

DSR/18.7.5 3

DSR/2.10.1.1 4

APWD (SOR Vol.

2)/ 1.37.1(a)(vi) 5

APWD (SOR Vol.

2)/ 1.37.1(a)(iv) 6
APWD (SOR Vol.
2)/ 1.37.1(a)(ii) 7

APWD (SOR Vol.

2)/ 1.37.4(a)(ii) 8

APWD (SOR Vol.

2)/ 1.37.5(a)(ii) 9

APWD (SOR Vol.

2)/ 1.39(iv) 10

APWD (SOR Vol.

2)/ 1.37.14(a)(v) 11

DSR/17.1.1 16

DSR/17.2.1 17

DSR/18.21.2.2
DSR/17.4.1 18

DSR/18.54.1 20

DSR/18.49.1 21

DSR/17.28.2 22

Market Rate 23

DSR/18.62.1 24

Market Rate 25

Market Rate 26

Market Rate

Market Rate 28
Market Rate

DSR/18.48

i)
ii)
iii)
Description Unit

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and testing of
joints complete as per direction of Engineer in Charge.
a) 20mm outer dia Mtr

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and testing of
joints complete as per direction of Engineer in Charge.
a) 25 mm outer dia Mtr

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply, including all CPVC plain & brass threaded
fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and testing of
joints complete as per direction of Engineer in Charge.
a) 40 mm outer dia Mtr

Excavating trenches of required width for pipes, cables, etc including excavation
for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m,
including getting out the excavated soil, and then returning the soil as required,
in layers not exceeding 20 cm in depth, including consolidating each deposited
layer by ramming, watering, etc. and disposing of surplus excavated soil as
directed, within a lead of 50 m for all kinds of soil:
For Pipes, cables etc, not exceeding 80 mm dia. Mtr

Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (Supreme/Prince) or other ISI
approved including joining, fitting and fixing wiyh clamps etc. as necessary
complete at all levels including below GL as directed and specified.
A) in exposed surfaces or trenches
(vi) 50mm dia Mtr

Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (Supreme/Prince) or other ISI
approved including joining, fitting and fixing wiyh clamps etc. as necessary
complete at all levels including below GL as directed and specified.
A) in exposed surfaces or trenches
(vi) 75mm dia Mtr
Supplying, fitting and fixing PVC pipes of 6 kg/cm2 (Supreme/Prince) or other ISI
approved including joining, fitting and fixing wiyh clamps etc. as necessary
complete at all levels including below GL as directed and specified.
A) in exposed surfaces or trenches
(vi) 110mm dia Mtr

Supplying, fitting and fixing 45 degree PVC bend of (Supreme/Prince) or other ISI
approved including joining, fitting and fixing etc. as necessary complete at all
levels including below GL as directed and specified.
A) in exposed surfaces or trenches
(vi) 110mm dia Each

Supplying, fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI
approved including joining, fitting and fixing etc. as necessary complete at all
levels including below GL as directed and specified.
A) in exposed surfaces or trenches
(vi) 110mm dia Each
Providing fitting and fixing PVC cowel of ISI make complete as directed and
specified
(V) 63 mm dia PVC cowel of ISI make Each

Supplying, fitting and fixing PVC plain reducer of (Supreme/Prince) or other ISI
approved including joining, fitting and fixing etc. as necessary complete at all
levels including below GL as directed and specified.
A) in exposed surfaces or trenches
(vi) 110mm * 63mm Each

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100
mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern,
including flush pipe, with manually controlled device (handle lever) conforming to
IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral
type foot rests Each

Providing and fixing white vitreous china pedestal type water closet (European
type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,
including flush pipe, with manually controlled device (handle lever), conforming
to IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever required :
E.W.C. pan with ISI marked white solid plastic seat and lid Each

Providing and fixing uplasticised PVC connection pipe with brass unions :
-45 cm length
-15mm nominal bore Each
Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with
automatic flushing cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required :
One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each
Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore,
122mm long, weighing not less than 99 gms Each
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
:
15 mm nominal bore Each
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
waste fittings complete.
Flexible Pipe 40mm Dia Each
Providing and fixing C.P. brass shower with arm
-15mm Each
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with
Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
-15 mm nominal bore, 105 mm long, weighing not less than 138 gms Each
Providing and fixing CPVC gate valve of approved quality (screwed end) :
25 mm nominal bore Each
Providing and fixing CPVC gate valve of approved quality (screwed end) :
40 mm nominal bore Each
Providing and fixing CPVC Unions
25 mm union Each
Providing and fixing CPVC Unions
40 mm union Each
Providing an electric Motor of 0.5 H.P Each

Providing and placing on terrace (at all floor levels) polyethylene water storage
tank, IS : 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the
base support for tank. Per Ltr
Total Amount

Source of item rate Adjustement factor for inflatio

DSR 2018 120%
APWD, S0R (Building) Vol 2. 2013-14 150%
Market Rate 100%
 Unit Rate adjusted for
Unit Rate inflation Quantity Amount

₹306.95 ₹368.34 29.55 ₹10,884.45

₹369.20 ₹443.04 73.3 ₹32,474.83

₹648.60 ₹778.32 251.9 ₹196,058.81

₹223.00 ₹267.60 274.2 ₹73,375.92

₹175.72 ₹263.58 11.3 ₹2,978.45

₹333.95 ₹500.93 29.9 ₹14,977.66

 ₹630.80 ₹946.20 6.2 ₹5,866.44

₹192.38 ₹288.57 6 ₹1,731.42

₹278.76 ₹418.14 3 ₹1,254.42

₹126.95 ₹190.43 3 ₹571.28

₹185.84 ₹278.76 3 ₹836.28

₹5,421.50 ₹6,505.80 5 ₹32,529.00

₹5,261.00 ₹6,313.20 2 ₹12,626.40

₹83.00 ₹99.60 5 ₹498.00

 ₹4,982.25 ₹5,978.70 3 ₹17,936.10

₹162.05 ₹194.46 10 ₹1,944.60

₹418.95 ₹502.74 16 ₹8,043.84

₹101.10 ₹121.32 3 ₹363.96

₹1,500.00 ₹1,500.00 1 ₹1,500.00

₹191.55 ₹229.86 1 ₹229.86

₹1,200.00 ₹1,200.00 2 ₹2,400.00

₹2,000.00 ₹2,000.00 2 ₹4,000.00

₹350.00 ₹350.00 3 ₹1,050.00

₹500.00 ₹500.00 6 ₹3,000.00

₹9,000.00 ₹9,000.00 1 ₹9,000.00

₹8.80 ₹10.56 1000 ₹10,560.00

₹446,691.71

Adjustement factor for inflation

120%
150%
100%