Scribd
Upload
61 views3 pages

Formation Damage Multiple Choice Questions

The document contains 10 multiple choice questions about formation damage. There are 4 possible sources of formation damage. Particle movement within the formation can be affected by wettability and fluid phases in the pore system. There are 2 bridging mechanisms that can occur. Any phenomenon that causes a distortion of flow lines from the well or restricts flow would result in a positive skin value. The components that are included in the skin formulation are formation damage, partial penetration skin, perforation skin, and non-Darcy flow.

Uploaded by

VũTrương
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
61 views3 pages

Formation Damage Multiple Choice Questions

The document contains 10 multiple choice questions about formation damage. There are 4 possible sources of formation damage. Particle movement within the formation can be affected by wettability and fluid phases in the pore system. There are 2 bridging mechanisms that can occur. Any phenomenon that causes a distortion of flow lines from the well or restricts flow would result in a positive skin value. The components that are included in the skin formulation are formation damage, partial penetration skin, perforation skin, and non-Darcy flow.

Uploaded by

VũTrương
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Formation Damage Multiple Choice Questions

1. How many sources of formation damage are there?

A. 1

B. 2

C. 3

D. 4

2. Which one of the following answers is not damage during well stimulation?

A. Damage may be caused by filtrate from circulating fluids

B. Damage may be caused by hydraulic fracturing fluids

C. Damage may be caused by incompatible fluid in fracture acidizing of carbonates

D. Damage while running tubing and packer

3. Which one of the following answers is correct about particle plugging within the formation?

A. Particle movement is affected by wettability and by the fluid phases in the pore system

B. Particle movement is not affected by wettability and the fluid phases in the pore system

C. Particle movement is affected by biological activities

D. Particle movement is affected by fines invasion and migration

4. How many bridging mechanism in total?

A. 1

B. 2

C. 3

D. 4

5. Clay migrates when contacting with foreign water, which alters the ionic environment. Which one is
not considered as foreign water:

A. Drilling fluids

B. Completion fluids
C. Reservoir fluids

D. Stimulation fluids

6. Which statement is correct about skin effect?

A. Any phenomenon that causes a distortion of the flow lines from the perfectly normal to the well
direction, or a restriction to flow, would result in a positive value of skin.

B. Any phenomenon that causes a distortion of the flow lines from the perfectly normal to the well
direction, or a restriction to flow, would result in a negative value of skin.

C. Any phenomenon that causes a distortion of the flow lines from the perfectly normal to the well
direction, or a restriction to flow, would not result in a negative value of skin.

D. Any phenomenon that causes a distortion of the flow lines from the perfectly normal to the well
direction, or a restriction to flow, would not result in a positive value of skin.

7. Which of these following answer is the correct cause of negative skin effect:

A. Acid matrix stimulation

B. Hydraulic fracturing

C. A highly declined wellbore

D. All of above

8. What can be concluded from this chart:

A. ∆pskin > 0, extra pressure drop due to reduced deliverability -> k skin < k
B. ∆pskin < 0, less pressure drop due to increase deliverability -> k skin > k
C. ∆pskin = 0, no change in deliverability -> k skin = k
D. A, B & C are all correct.
E. None are correct.
9. Which component is included in Skin formulation?

A. Formation Damage (Sd)

B. Partial Penetration Skin Sc+ ϴ

C. Perforation Skin (Sd)

D. Non-Darcy Flow (Turbulence damage) (ΣSpseudo)

E. All of above

10. Choose the correct statement about Partial Penetration Skin Sc+ ϴ

A. Effect becomes negligible when completion height > 75% of reservoir thickness

B. Effect becomes negligible when completion height > 55% of reservoir thickness

C. Effect becomes negligible when completion height > 65% of reservoir thickness

D. Effect becomes negligible when completion height > 45% of reservoir thickness

You might also like