Scribd
Upload
692 views1 page

Simplex Production Calculation PDF

The document provides an example calculation to determine the twist per inch (TPI) produced on a simplex machine. Given the diameter and rpm of the front roller is 28mm and 30 rpm respectively, and the flyer rpm is 1000, the surface speed of the front roller is calculated as 103.9 inches/min. Plugging the flyer rpm and surface speed into the TPI formula gives a TPI of 9.63.

Uploaded by

প্রমিত সরকার
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
692 views1 page

Simplex Production Calculation PDF

The document provides an example calculation to determine the twist per inch (TPI) produced on a simplex machine. Given the diameter and rpm of the front roller is 28mm and 30 rpm respectively, and the flyer rpm is 1000, the surface speed of the front roller is calculated as 103.9 inches/min. Plugging the flyer rpm and surface speed into the TPI formula gives a TPI of 9.63.

Uploaded by

প্রমিত সরকার
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Draw frame Simplex Production Calculation:

Flyer speed or Spindle speed (rpm)


Twist or TPI = ………………......……………………
Delivery speed (inches/min)

Problem: 1
Calculate the TPI (twist per inch) produced on a simplex with diameter of front roller
28 mm and its rpm be 30. The rpm of flyer is 1000.

Solution:

Here,

Dia of front roller = 28 mm = 2.8 cm = 1.1024 inch


rpm of front roller = 30
rpm of flyer = 1000
TPI = ?

We know,

Surface speed of front roller = π x Dia of front roller x rpm of front roller
= π x 1.1024 x 30
= 103.9 inch/min

Flyer speed or Spindle speed (rpm)


Twist or TPI = ………………......……………………
Delivery speed (inches/min)

1000
= ……………
103.9

= 9.63 (Ans)

You might also like