Outdoor Selectable-

Output Horns,
Strobes, and
Horn Strobes for
Wall Applications
SpectrAlert® Advance outdoor audible visible products
are rich with features that cut installation times and
maximize profits.

Features SpectrAlert Advance offers the broadest line of outdoor horns,

strobes, and horn strobes in the industry. With white or red plastic
• Weatherproof per NEMA 4X, IP56
housings, wall or ceiling mounting options, and plain or FIRE-printed
• Listed to UL 1638 (strobe) and UL 464 (horn)
devices, SpectrAlert Advance can meet virtually any application
• C
 ompatible with System Sensor synchronization protocol and requirement, including indoor, outdoor, wet, and dry applications in
legacy SpectrAlert products temperatures from −40°F to 151°F.
• F
 ield-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115,
135, 150, 177, and 185 Like the entire SpectrAlert Advance line, outdoor horns, strobes,
• A
 utomatic selection of 12- or 24-volt operation at 15 and and horn strobes for wall applications include a variety of features
15/75 candela that increase application flexibility and simplify installation. First,
field-selectable settings, including candela, automatic selection of
• Rotary switch for horn tone and three volume selections
12- or 24-volt operation, horn tones, and three volume options enable
• Horn rated at 88+ dBA at 16 volts
installers to easily adapt devices to meet requirements.
• Rated from –40°F to 151°F
• U
 niversal mounting plate with an onboard shorting spring that Next, SpectrAlert Advance devices use a universal mounting plate
tests wiring continuity before devices are installed for both wall and ceiling applications. This mounting plate includes
• Plug-in design with minimal intrusion into the back box an onboard shorting spring that ensures wiring continuity before
devices are installed, so installers can verify proper wiring without
• Tamper-resistant construction
mounting the devices and exposing them to potential construction
• Listed for ceiling or wall mounting damage. Once the plates are mounted, all SpectrAlert Advance
devices utilize a plug-in design with a single captured screw to
speed installation and virtually eliminate costly ground faults.

Outdoor devices ship with weatherproof plastic back boxes (metal

back boxes are available separately) that accommodate in-and-
out wiring for daisy chaining devices. Plastic back boxes feature
Agency Listings removable side flanges and improved resistance to saltwater
corrosion. Knock-outs located on the back eliminate the need to drill
holes for screw-in mounting. Plastic and metal weatherproof back
boxes come with ¾‑inch top and bottom conduit entries and ¾‑inch
7300-1653:187 (outdoor strobes)
7125-1653:188 (horn strobes,
knock-outs at the back. A screw-in NPT plug with an O-ring gasket
S4011 (chimes, horn strobes, horns)
S3593 (outdoor and alert strobes) 3023572 MEA452-05-E
chime strobes)
7135-1653:189 (horns, chimes)
for a watertight seal is included with each back box.

AVDS115-02 • 12/3/2019 • Page 1

SpectrAlert Advance Outdoor Horn, Strobe, and Horn StrobeSpecifications
Architect/Engineer Specifications
General
SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall
be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate.
Also, SpectrAlert Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification
appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification
appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between
16.5 and 33 volts. Outdoor SpectrAlert Advance products shall operate between −40 and 151 degrees Fahrenheit from a regulated DC or full-
wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95,
110, 115, 135, 150, 177, and 185.

Strobe
The strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and shall be approved for fire protective service.
The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for
visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system. The strobe must be installed with its weatherproof back box in order to remain outdoor approved
per UL. The strobe shall be suitable for use in wet environments.

Horn Strobe Combination

The horn strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and UL 464 and shall be approved for
fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with
Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe
light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to
switch between a temporal three pattern and a non-temporal (continuous) pattern. These options shall be set by a multiple position switch.
On four-wire products, the strobe shall be powered independently of the sounder. The horn or horn strobe models shall operate on a coded or
non-coded power supply. The horn strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The
horn strobe shall be suitable for use in wet environments.

Physical/Electrical Specifications
Operating Temperature –40°F to 151°F (–40°C to 66°C)
Strobe Flash Rate 1 flash per second
Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWR1
Operating Voltage Range2 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
Operating Voltage with MLD3 Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal)
Input Terminal Wire Gauge 12 to 18 AWG
Wall-Mount Dimensions (including lens) 5.6˝ L × 4.7˝ W × 2.5˝ D (142 mm L × 119 mm W × 64 mm D)
Horn Dimensions 5.6˝ L × 4.7˝ W × 1.3˝ D (142 mm L × 119 mm W × 33 mm D)
Wall-Mount Weatherproof Back Box Dimensions (SA-WBB) 5.7˝ L × 5.1˝ W × 2.0˝ D (145 mm L × 130 mm W × 51 mm D)
Notes:
1. Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs.
2. 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd.

AVDS115-02 • 12/3/2019 • Page 2

UL Current Draw Data
UL Max. Strobe Current Draw (mA RMS) UL Max. Horn Current Draw (mA RMS)
8–17.5 Volts 16–33 Volts 8–17.5 Volts 16–33 Volts
Candela DC FWR DC FWR Sound Pattern dB DC FWR DC FWR
Standard 15 123 128 66 71 Temporal High 57 55 69 75
Candela 15/75 142 148 77 81 Temporal Medium 44 49 58 69
Range 30 NA NA 94 96 Temporal Low 38 44 44 48
75 NA NA 158 153 Non-Temporal High 57 56 69 75
95 NA NA 181 176 Non-Temporal Medium 42 50 60 69
110 NA NA 202 195 Non-Temporal Low 41 44 50 50
115 NA NA 210 205 Coded High 57 55 69 75
High 135 NA NA 228 207 Coded Medium 44 51 56 69
Candela 150 NA NA 246 220 Coded Low 40 46 52 50
Range 177 NA NA 281 251
185 NA NA 286 258
UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, Standard Candela Range (15–115 cd)
8–17.5 Volts 16–33 Volts
DC Input 15 15/75 15 15/75 30 75 95 110 115
Temporal High 137 147 79 90 107 176 194 212 218
Temporal Medium 132 144 69 80 97 157 182 201 210
Temporal Low 132 143 66 77 93 154 179 198 207
Non-Temporal High 141 152 91 100 116 176 201 221 229
Non-Temporal Medium 133 145 75 85 102 163 187 207 216
Non-Temporal Low 131 144 68 79 96 156 182 201 210
FWR Input
Temporal High 136 155 88 97 112 168 190 210 218
Temporal Medium 129 152 78 88 103 160 184 202 206
Temporal Low 129 151 76 86 101 160 184 194 201
Non-Temporal High 142 161 103 112 126 181 203 221 229
Non-Temporal Medium 134 155 85 95 110 166 189 208 216
Non-Temporal Low 132 154 80 90 105 161 184 202 211
UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, High Candela Range (135–185 cd)
16–33 Volts 16–33 Volts
DC Input 135 150 177 185 FWR Input 135 150 177 185
Temporal High 245 259 290 297 Temporal High 215 231 258 265
Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258
Temporal Low 232 251 282 292 Temporal Low 207 221 248 256
Non-Temporal High 255 270 303 309 Non-Temporal High 233 248 275 281
Non-Temporal Medium 242 259 293 299 Non-Temporal Medium 219 232 262 267
Non-Temporal Low 238 254 291 295 Non-Temporal Low 214 229 256 262

Candela Derating Horn Tones and Sound Output Data

For K series products used at low temperatures, listed Horn and Horn Strobe Output (dBA)
candela ratings must be reduced in accordance with 24-Volt Nominal
8–17.5 16–33
this table.
Switch Sound Volts Volts Reverberant Anechoic
Strobe Output (cd) Position Pattern dB DC FWR DC FWR DC FWR DC FWR
Listed Candela Candela rating at –40°F 1 Temporal High 78 78 84 84 88 88 99 98
15 2 Temporal Medium 74 74 80 80 86 86 96 96
15/75 Do not use below 32°F 3 Temporal Low 71 73 76 76 83 80 94 89
30 4 Non- High
75 44 82 82 88 88 93 92 100 100
Temporal
95 70 5 Non- Medium
78 78 85 85 90 90 98 98
110 110 Temporal
115 115 6 Non- Low
75 75 81 81 88 84 96 92
135 135 Temporal
150 150 7†
Coded High 82 82 88 88 93 92 101 101
177 177 8† Coded Medium 78 78 85 85 90 90 97 98
185 185 9† Coded Low 75 75 81 81 88 85 96 92
Settings 7, 8, and 9 are not available on 2-wire horn strobe.
†
SpectrAlert Advance Diagrams
119mm 64mm
4.7˝ 2.5˝ 6.8˝
Dia.

142mm 2.5˝
5.6˝

Wall-Mount Horn Strobes Wall Plastic Weatherproof Back Box Wall-Mount Horn Strobe with Plastic
Weatherproof Back Box
SpectrAlert Advance Ordering Information
Model Description
Red White
Wall Horn Strobes
P2RK P2WK 2-Wire Horn Strobe, Standard cd, Outdoor (includes plastic weatherproof back box)
P2RK-P P2WK-P 2-Wire Horn Strobe, Standard cd, Outdoor, Plain (includes plastic weatherproof back box)
P2RK-R P2WK-R 2-Wire Horn Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box)
P2RHK P2WHK 2-Wire Horn Strobe, High cd, Outdoor (includes plastic weatherproof back box)
P2RHK-P P2WHK-P 2-Wire Horn Strobe, High cd, Outdoor, Plain (includes plastic weatherproof back box)
P2RHK-R P2WHK-R 2-Wire Horn Strobe, High cd, Outdoor (does not include plastic weatherproof back box)
P4RK P4WK 4-Wire Horn Strobe, Standard cd, Outdoor (includes plastic weatherproof back box)
P4RK-R — 4-Wire Horn Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box)
P2RHK-120 — 2-Wire Horn Strobe, High cd, Outdoor, 120 V (includes plastic weatherproof back box)
Wall Strobes
SRK SWK Strobe, Standard cd, Outdoor (includes plastic weatherproof back box)
SRK-P SWK-P Strobe, Standard cd, Outdoor, Plain (includes plastic weatherproof back box)
SRK-R SWK-R Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box)
SRHK SWHK Strobe, High cd, Outdoor (includes plastic weatherproof back box)
SRHK-P SWHK-P Strobe, High cd, Outdoor, Plain (includes plastic weatherproof back box)
SRHK-R SWHK-R Strobe, High cd, Outdoor (does not include plastic weatherproof back box)
Horns
HRK — Horn, Red, Outdoor (includes plastic weatherproof back box)
HRK-R — Horn, Red, Outdoor (does not include plastic weatherproof back box)
Accessories
SA-WBB SA-WBBW Metal Weatherproof Back Box
WTP WTPW Metal Weatherproof Outdoor Flush-mounting Plate

Notes:
All -P models have a plain housing (no “FIRE” marking on cover). All -R models require metal weatherproof outdoor flush mounting plate or a metal weatherproof
outdoor back box (order separately). “Standard cd” refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. “High cd” refers to strobes
that include 135, 150, 177, and 185 candela settings. When replacing standard outdoor units both the device and back box must be replaced.

3825 Ohio Avenue • St. Charles, IL 60174 ©2019 System Sensor.

Phone: 800-SENSOR2 • Fax: 630-377-6495 Product specifications subject to change without notice. Visit systemsensor.com
for current product information, including the latest version of this data sheet.
www.systemsensor.com AVDS115-02 • 12/3/2019