Scribd
Upload
120 views1 page

Assignment 3 PDF

This document contains 6 questions related to designing digital filters using bilinear transformation and impulse invariance methods. The questions ask the student to: 1) Design a single pole low-pass filter with a 3dB bandwidth of 0.2π using bilinear transformation. 2) Obtain the system function of a digital filter from a given analog filter function using bilinear transformation where the digital filter is resonant at ωr = π/2. 3) Design a second order Butterworth bandpass filter between 300Hz to 500Hz using bilinear transformation.

Uploaded by

Bhavey Malhotra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
120 views1 page

Assignment 3 PDF

This document contains 6 questions related to designing digital filters using bilinear transformation and impulse invariance methods. The questions ask the student to: 1) Design a single pole low-pass filter with a 3dB bandwidth of 0.2π using bilinear transformation. 2) Obtain the system function of a digital filter from a given analog filter function using bilinear transformation where the digital filter is resonant at ωr = π/2. 3) Design a second order Butterworth bandpass filter between 300Hz to 500Hz using bilinear transformation.

Uploaded by

Bhavey Malhotra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MANIPAL UNIVERSITY JAIPUR

SCHOOL OF ELECTRICAL, ELECTRONICS & COMMUNICATION (SEEC)


ENGINEERING

Department of Electronics & Communication Engineering

Course Code: EC1607 Course Name: Digital Signal Processing


_________________________________________________________________________________________
Assignment-2
Q1. Design a single pole low-pass digital filter with a 3-dB bandwidth of 0.2π using bilinear transformation
applied to analog filter.
𝛺𝑐
𝐻𝑖𝑛𝑡: 𝐻𝑎 (𝑠) = , 𝑤ℎ𝑒𝑟𝑒 𝛺𝑐 𝑖𝑠 𝑡ℎ𝑒 3𝑑𝐵 𝑏𝑎𝑛𝑑𝑤𝑖𝑑𝑡ℎ 𝑜𝑓 𝑡ℎ𝑒 𝑓𝑖𝑙𝑡𝑒𝑟
𝑠 + 𝛺𝑐

Q2. The system function of an analog filter is given as


𝑠 + 0.1
𝐻𝑎 (𝑠) =
(𝑠 + 0.1)2 + 16

Obtain the system function of the digital filter, which is resonant at a frequency ω r = π/2 using bilinear
transformation.

Q3. Design a second order discrete-time butterworth filter with a cut-off frequency of 1 KHz and sampling
frequency of 104 samples/second using bilinear transformation.

Q4. Design a second order bandpass butterworth filter with a passband of 300 Hz to 500 Hz and sampling
frequency of 1500 Hz using bilinear transformation ., given prototype LPF with transfer function
𝛺𝑐
𝐻𝑎 (𝑠) =
𝑠 + 𝛺𝑐

Q5. Design a digital HPF butterworth filter with a cut off frequency 30 Hz and sampling frequency of 150 Hz
using bilinear transformation.

Q6. Determine the filter order and cut-off frequency of a digital filter with following specifications:
0.89 ≤ |𝐻(𝑒 𝑗𝜔 )| ≤ 1 0 ≤ 𝜔 ≤ 0.4 𝜋

|𝐻(𝑒 𝑗𝜔 )| ≤ 0.18 0.6𝜋 ≤ 𝜔 ≤ 𝜋

Use impulse invariance method.

You might also like