Scribd
Upload
57 views1 page

Page 1

Uploaded by

number_25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views1 page

Page 1

Uploaded by

number_25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TM

MASTER GRIPPERS
FLOW CONE GREY EPDM WASHERS Patent #4292876
METAL PANEL TO WOOD GIRT OR PURLIN
• High Hex Washer Head and Sharp Twin Lead Thread design pierces and
threads multiple laps of high tensile light gauge steel up to 26 gauge.
• Master Grippers are available in diameters #10, #14 in lengths of 3/4” to 8”.
Stitch Screws are available in # 12 x 3/4”, Diaphram Screws in # 12 x 1-1/2”.
• Master Gripper Low Profile Pancake Head, Quadrex Drive screws
fasten standing seam roof clips or hidden fastener profile panels.
#10 x 1”, 1-1/2”, 2”, 2-1/2” - #12 x 1/14”.
• Master Grippers are available unassembled in # 10, 12 & 14 -
Heavy Duty in # 18 & 24 diameter.
• Highest pullout values in the industry, see page 8.
• Master Grippers available up to 8’’ lengths on special orders.
• Applications:
• Roof or wall panel to wood frame • Panel over insulation to wood framing
TM
• Stitching panels

Colormate® Nylon Master Seal® Flow Cone Washer


Nylon heads color Vulcanized grey EPDM
matched to any panel. providing a 100% seal - NO LEAKS

Another industry first from Leland


Master Grippers are packaged in a square plastic pail with strong carrying
handle and feature a ‘Tab-Lok’ security lid. The container is attractively labeled
on one side and clearly displays all pertinent information.
The many features include:
• Eliminates weather damage on job site • Handle provides ease of handling
in plant and on job sites • ‘Tab-Lok’ security lid identifies opened packages
and / or pilferage • Container is reusable by customer.

Master Grippers - Size - Material - Chart


DIA. 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 3-1/2” 4” 6” 8”

#10 ▲●■ ▲●■ ▲●■ ▲●■ ▲● ▲● ▲● ●


Diaphram Screw
Shoulder design
for diaphram #12 ▼ ●❑
action loading
# 12 dia. x 1 1/2” #14 ● ● ●■ ● ● ● ● ● ● ● ●

▲ 304 HT Tensile Stainless Steel ● Case Hardened Steel ■ Colormate ❑ Steel Diaphram ▼ Steel Stitching

Anti-corrosion finishes available for Master Grippers


Standard Coating Longlife Coating 304 HT Stainless Powder Coated ACQ Compatible
JS600 Plated

Withstands 500 Hours Withstands 2000 Hours Exceeds 50 cycles in Withstands 1700 Hours
Salt Spray test and Salt Spray test and High lubricity Kesternich Salt Spray test and
5 cycles in Kesternich 35 cycles in Kesternich anti-corrosion protection (2 litre SO2 per cycle) testing 18 cycles in Kesternich
(1 litre SO2 per cycle) testing (1 litre SO2 per cycle) testing for stainless steel 3000 hrs. salt spray (1 litre SO2 per cycle) testing
No Red Rust No Red Rust No Red Rust No Red Rust No Red Rust
For detailed information on finishes see plating & coating section
Master Seal is a registered trademark of Aztec Washer Company, Inc.

1 MASTER GRIPPERS 2008

You might also like