Scribd Logo
Upload

Welcome to Scribd!

  • 109 views

    Juvora Dental Disc: Instructions For Use

    Uploaded by

    The-Dr

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Juvora Dental Disc: Instructions For Use

    Uploaded by

    The-Dr
    109 views2 pages

    Original Title

    IDCM-JUV-IFU-0001-Rev-3

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    109 views2 pages

    Juvora Dental Disc: Instructions For Use

    Uploaded by

    The-Dr

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Production

    JUVORATM Dental Disc blanks can only be processed on suitable milling machines with
    appropriate milling programs. The milling head must be suitable for machining PEEK
    polymer. JUVORATM Ltd recommends suitable adaptation of the CAM software by the
    software manufacturer to allow milling of the JUVORATM Dental Disc. For an exact fit, a
    5-axis milling machine is recommended. JUVORATM Ltd also recommends cooling the
    milling head for more accurate milling and to prolong its useful life.*See footnote.
    Prosthesis removal from the Juvora Dental Disc
    Remove the prosthesis carefully from the blank using a hard metal cutter, and pay
    particular attention to the edges of the prosthesis.
    Safety Information
    While machining the JUVORATM Dental Disc, the following safety precautions are
    recommended:
    • Dust mask or dust extraction
    • Personal protective equipment (eye protection, gloves)
    Storage Information
    The JUVORATM Dental Disc should be stored in dry storage and avoid exposure to direct
    sunlight. The PEEK-OPTIMA® polymer from which the JUVORATM Dental Disc is made is
    stable and can be stored for an extended period of time (10 year shelf life). It has a working Instructions For Use
    temperature range from cryogenic up to 250°C and hence the storage temperature range

    IDCM-JUV-IFU-0001, Rev: 3
    for the JUVORATM Dental Disc is any ambient temperature and humidity.
    Additional Information
    For additional information contact [email protected]
    JUVORATM Dental Disc
    JUVORA Ltd
    Technology Centre, Hillhouse International, Thornton Cleveleys, Lancashire, FY5 4QD, UK
    Tel: +44 (0)1253 898000 · www.juvoradental.com Caution: US Federal Law restricts this device to sale
    by or on the order of a dentist
    *Note: Follow the instructions of your machine manufacturer regarding the processing of JUVORA
    Dental Discs. The working manual lists examples of suitable milling systems.
    Indications Material Information
    • For the manufacture of full and partial removable dentures and implant overdentures. JUVORATM Dental Discs are manufactured from Invibio PEEK-OPTIMA® LT1
    polymer, a Type 3 thermoplastic according to ISO 20795 – Denture Base Polymer.
    1: Telescope 2: Attachment 3: Implant Overdenture
    Form: Solid
    Colour: Grey/Brown
    Odour: Odourless
    pH (Value): Not known
    Boiling Point (°C): Not known
    Melting Point (°C): 343
    Flash Point (°C): Not known
    Auto Ignition Temperature (°C): 595
    Contraindications Oxidising Properties: Not applicable
    Not to be used in permanent (i.e., cemented or implant retained) crowns, caps, bridges Vapour Pressure (Pascal): Not known
    or superstructures. Density (g/ml): ~1.3
    Solubility (Water): Insoluble
    Precautions
    To be manufactured with material thickness/size in accordance with the following: Processing Instructions
    • The minimum thickness of secondary crowns and matrix housings should not be less Detailed processing instructions are provided and must be observed by the end
    than 0.7 mm users (dental labs and technicians) when milling frameworks from the JUVORATM
    • The minimum thickness for “conventional” retention grids should not be less Dental Disc. Dental labs that are supplied with the disc will be certified through
    than 2 mm. JUVORATM Ltd, a process that involves assessment of their capability to follow
    • Minimum size of horizontal retainer in lower jaw 2 mm x 8 mm the processing guidance to manufacture high quality frameworks and finished
    • Minimum size of horizontal band in upper jaw 2 mm x 8 mm dentures where applicable using their existing equipment. This assessment will be
    completed by JUVORATM Ltd or their certified milling centres.

    You might also like