Scribd
Upload
107 views2 pages

Flyback Transformers For 25Watt Poe Application: 遠見電子股份有限公司 Providence Electronics Corp

This document summarizes two flyback transformer models for 25W PoE applications. The models have primary inductances of 110μH and 112μH and support input voltages of 36-60V. They provide 1500Vrms isolation between the primary and secondary windings and have turns ratios and outputs tailored for 3.3V/8A and 12V/2.12A regulation respectively. Electrical specifications and schematics are provided along with physical dimension details.

Uploaded by

wxzcldw163.com
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
107 views2 pages

Flyback Transformers For 25Watt Poe Application: 遠見電子股份有限公司 Providence Electronics Corp

This document summarizes two flyback transformer models for 25W PoE applications. The models have primary inductances of 110μH and 112μH and support input voltages of 36-60V. They provide 1500Vrms isolation between the primary and secondary windings and have turns ratios and outputs tailored for 3.3V/8A and 12V/2.12A regulation respectively. Electrical specifications and schematics are provided along with physical dimension details.

Uploaded by

wxzcldw163.com
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

遠見電子股份有限公司

>>PEC-Coil>>
Providence Electronics Corp.

FLYBACK TRANSFORMERS
For 25Watt PoE Application
MODEL NO : SPT-210115-25 HF SERIES
Features :
＊ SMD version .
＊ High performance and low profile .
＊ Compliant with RoHS and halogen free .
Application :
＊ Designed to meet 25.5W PoE IEEE 802.3at-2009 standard.
＊ Flyback topology and 100KHz operating frequency.
＊ Operates in continuous conduction mode with 36-60 V input .
＊ 1500Vrms, one minute isolation between primary and secondary .
Electrical specification :
PRIMARY DCR
PRIMARY
INDUCTANCE LEAKAGE (Ohms) TURNS RATIO OUTPUT SCHENATIC
INDUCTANCE PEAK
(μH) min INDUCTANCE Max ( NOTE 4 ) ( NOTE5)
MODEL NO (μH) ±10% CURRENT
@PEAK (μH) max (NOTE 3 )
@0ADC (ADC)
CURRENT ( NOTE 2 )
( NOTE1 ) PRI SEC BIAS PRI:SEC PRI:BIAS
( NOTE 1 )
3.3V
SPT-210115-25-033A HF 110 80 2.5 2.0 0.11 0.0035 0.30 1:0.115 1:0.308 B
8A
12.0V
SPT-210115-25-120 HF 112 101.2 2.0 1.5 0.15 0.030 0.30 1:0.3333 1:0.1666 A
2.12A

NOTE(1) : Measuring condition 100 KHZ,0.1Vrms.


NOTE(2) : Leakage inductance is for the primary winding with sec windings shorted .
NOTE(3) : DCR is with the windings connected in parallel .
NOTE(4) : Turns ratio is with the primary and secondary windings connected in parallel .
NOTE(5) : Output is with the secondary windings connected in parallel .
NOTE(6) : Weight : 13.5 g / pcs .
NOTE(7) : Storage time :The recommended storage time of transformer is maximum 12 months, and don't suggest to use the parts over
12 months.

Schematic :

1 1
2 2
PRI 7 PRI 10,11,12
4 9 4
3 3

5 SEC 5 SEC

BIAS 10 BIAS
(6V/0.1A) 8 (8V/0.2A) 7,8,9

6 6

“A” “B”
遠見電子股份有限公司
>>PEC-Coil>>
Providence Electronics Corp.

Physical Dimension : (unit :mm)


3.3
28.6 0.70 1.27 X12
+0.8/-0.5 X12 X12
12 7
7 12

24.4
+/-0.3 23.6

6 1
1 6
11.5 3.0 3.0
MAX X10 X10
21
MAX

TOP VIEW SIDE VIEW BOTTOM VIEW PCB PATTERN

You might also like