Technical Description Dehydration and Desalting System Akal J-1 Platform
Technical Description Dehydration and Desalting System Akal J-1 Platform
Technical Description Dehydration and Desalting System Akal J-1 Platform
1. INTRODUCTION
This document provides the technical details for the wash water recirculation water pump for
crude oil treatment on AKAL J1, located in the Campeche area for PEMEX.
Supporting documents:
The wash water recirculation water pump, BA-3101 and BA-3102 has the function of re-
circulating served wash water from the Desalters DE-3103 and DE-3103 to aid the desalting
process in a temporary basis. This is because the wash water mixing system is not 100%
efficient.
Its operation will be in execution any time the flowrate of desalinated water coming from the
reverse osmosis plant is under normal conditions. The re-circulated served water has much lower
salinity than the produced water; therefore the dehydration system will not be affected if this
temporary operation is done while the ROP is at lower flowrate.
The wash water recirculation water pump, BA-3101 and BA-3102 are provided with the following
technical features:
TECHNICAL DESCRIPTION
Dehydration and Desalting System
Akal J-1 Platform EPI-A-11
PROY. No.: F.27861 REQ. No.: 4106918002
Original Submittal Date:
ELABORO: JS 01/19/2012 REV. No.: 01 2 de 2
Head (FT): 82
Pump Information:
Brand/Model: Summit 1.5x3-6, STO frame, model 2196, horizontal single stage heavy
duty centrifugal ANSI process pump
Constructed with all CD4MCu duplex SS liquid end & solid 2205 duplex SS shaft
Oil bath lubricated SKF ball bearings with INPRO labyrinth isolators
Burgmann ASTN single cartridge mechanical seal with flush, quench & drain connections,
carbon vs. SiC, 316SS, Viton
Plan 11 seal flush with 316SS tubing and Swagelok double ferrule fittings
Dodge D-Flex spacer coupling with AGMA class 9 balanced hubs & 3.5” spacer