DATA SHEET

Dehydration and Desalting System

REGIÓN MARINA Akal J-1 Platform HD-H-007
PROY. No. F.27861 REQ. No.: 4106918002
Original Submittal Date:
ELABORO: MT Rev No 01 HOJA 1 DE 2
03/30/2012

Elaboró TH 3/30/2012

Proy. MT 3/30/2012 Asphaltene Dispersant Injection Pump (BD-3902A/R)

Revisó MT 3/30/2012 DESCRIPTION OF DOCUMENT
Validó GV 3/30/2012

Coord. SP 3/30/2012 No. Proy.: R-AH0018 REV

R-AH0018-0-732K-0002
ESC. N/A ACOT. EN: N/A Lugar Houston Cameron No. 01
 ASPHALTENE DISPERSANT INJECTION PUMP DATA SHEET Page 2 of 2
Data Sheet No. R-AH0018-0-732K-0002 Approval
REV Date Description By Chk. Eng. Proj.
1 28 Jan, 2012 ISSUE FOR PURCHASE TH MT GV SP
11210 Equity Drive
Houston, Texas 77041
USA
Tel. 713-849-7500
Fax 713-849-8973 Client: PEMEX Exploración y Producción Equipment Demulsifiers Pump
Project: D&D Akal J1 Tag No: BD-3902A/R
Client Ref.: HD-H-007 Cameron Job R-AH0018
DIAPHRAGM METERING PUMP
1 FLUID
2 Asphaltenes Inhibitor Units MAXIMUM NORMAL MINIMUM
3 Inlet Flowrate GPH 15.3 10.0 1.0
SERVICE CONDITIONS

4 Suction Pressure kg/cm2(g) Atmospheric Atmospheric Atmospheric

5 Discharge Pressure kg/cm2(g) 42.0 38.0 34.0
o
6 Temperature C 41.0 26.7 14.5
7 Specific Gravity SG 1.0 @ 15.5 oC 0.90 @ 15.5 oC 0.88 @ 15.5 oC
8 Viscosity cP 60 @ 25 oC 15 @ 25 oC 6 @ 25 oC
9 Vapor Pressure PSIA --- --- ---
10 Specific Heat Ratio (k) -- --- --- ---
11 Critical Pressure kg/cm2(a) --- --- ---
12 Rated Pump Discharge Pressure kg/cm2(g) 40.00 40.00 40.00
13 Description Chemical Metering Pump 42 Manufacturer RELIANCE, OR SIMILAR SIEMENS
14 Service Chemical Inhibitor of Asphaltenes 43 Model: Severe Duration
15 Manufacturer Milton Roy 44 kW / RPM: 0.5 HP @ 1725 RPM
ELECTRICAL DRIVER DATA

16 Serie: Milroyal B 45 Volts / Phase / Hz: 230-460 / 3 / 60Hz

GENERAL

17 Model: MBH1018FPDFJM4SEST11C511 46 Frame: IP56

18 No. of Feeds / Discharges 1/1 47 Area Classification / Division / Group Clase I, Div. II, Gr. C, D/ T3
19 Check Valve Design Double Ball Suction / Discharge 48 Service Factor: 1.15
20 Weight - Includes Motor (lbs): 49 Temperature Rise B
21 Maximum Solids Size: N/A 50 Insulation Type: F
22 Percent Solids: N/A 51
23 Plunger Diameter (in) 5/8" 52 Acclimatized TROPICALIZATION
PUMP PARAMETERS

24 Stroke Length (in) / Speed ​(spm): By Vendor 53

25 Suction Connection Size 1/2" NPT 54
26 Discharge Connection Size: 1/2" NPT 55
27 Capacity Adjustment Type Manual 56 Per manufacturer, for offshore services
Surface Prep:
28 Turndown 10 : 1 Ratio 57
29 58 Per manufacturer, for offshore services
Primer:
30 59
31 Housing: 316 SS / Cast Iron 60
Second:
32 Liquid End Body: 316 SS 61
COATINGS

33 Diaphram / Plunger: PTFE Diaphragm 62

Third:
34 Intermediate Fluid N/A 63
MATERIALS

35 Packing Type N/A 64

Top:
36 Check Valve Body 316 SS 65
37 Check Valve Ball / Seat 316 SS 66
Finish Color:
38 Cartridge 316 SS 67
39 Contour Plate 316 SS 68
40 69
41 70
71 1. The Pump internal valve will be set to 40 kg/cm2 (g).
72 2 The pumps will be equipped with back pressure valves which are located in the pump discharge
73 3 The pumps will be equipped with 1 / 2 "FNPT gauge must be calibrated in ml. Indicator Model No. Kenco.
NOTES

The pumps are designed with internal double suction and discharge valves according to API 675, and are able to be manually adjusted during
74 4
operation.
75 5 Stationary hydrostatic pressure test are applied to both pumps
76 6 The pumps will be supplied in accordance with API 675.
##