Scribd
Upload
438 views

(PDF) APT Programming Eamples - Compress

This APT program defines geometric elements like points, lines, and planes to describe a part geometry. It then defines tool and machining parameters before specifying the toolpath motions between elements like lines and circles to machine the part. The program starts at point P0 and follows the toolpath motions between defined geometric elements before returning to the start point P0.

Uploaded by

Mihai Tataroi /Student
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
438 views

(PDF) APT Programming Eamples - Compress

This APT program defines geometric elements like points, lines, and planes to describe a part geometry. It then defines tool and machining parameters before specifying the toolpath motions between elements like lines and circles to machine the part. The program starts at point P0 and follows the toolpath motions between defined geometric elements before returning to the start point P0.

Uploaded by

Mihai Tataroi /Student
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

APT Programming

Examples
APT Contouring Example
PARTNO P1534
MACHIN/ MILL, 4 L4 P2
CLPRINT C2 L3
OUTTOL/ 0.0015 P3
P0 = POINT/ 0, 0, 1.1 P5
P1 = POINT/ 1, 1, 0.5
P2 = POINT/ 4, 3.5, 0.5 L5 L2
P3 = POINT/ 5.85, 2.85, 0.5 P4
PL1 = PLANE/ P1, P2, P3 y
PL2 = PLANE/ PARLEL, PL1, ZSMALL, 0.5
P1 = (1,1,0.5) C1
P4 = POINT/ 5, 1.85, 0.5
P5 = POINT/ 2, 2.5, 0.5 L1
x
C1 = CIRCLE/ CENTER, P4, RADIUS, 0.85
C2 = CIRCLE/ CENTER, P5, RADIUS, 1.0
L1 = LINE/ P1, RIGHT, TANTO, C1 Z = 0.5
L2 = LINE/ P3, LEFT, TANTO, C1
L3 = LINE/ P2, P3
Z=0
L4 = LINE/ P2, RIGHT, TANTO, C2
L5 = LINE/ P1, LEFT, TANTO, C2 z
MILLS = MACRO/ CUT, SSP, FRT, CLT
CUTTER/ CUT
x
APT Program
P0 = POINT/ 0, -2, 0
P1 = POINT/ 0.312, 0.312, 0
P2 = POINT/ 4, 1, 0
C1 = CIRCLE/ CENTER, P1, RADIUS, 0.312
C2 = CIRCLE/ CENTER, P2, RADIUS, 1
L2 = LINE/ RIGHT, TANTO, C2, RIGHT, TANTO, C1
L1 = LINE/ LEFT, TANTO, C2, LEFT, TANTO, C1
PL1 = PLANE/ P0, P1, P2
FROM/ P0
L2
GO/TO, L1, TO, PL1, TO, C2
P2
GOLFT/ L1, TANTO, C1
P1
GOFWD/ C1, PAST, L2 C1 C2
GOFWD/ L2, TANTO, C2
L1
GOFWD/ C2, PAST, L1
GOTO/ P0

P0
Geometric Statements of APT Program
P0 = POINT/ -1, -1,3
P1 = POINT/ 0, 0 y
P2 = POINT/ 3, 0
P3 = POINT/ 4, 0 C2
P4 = POINT/ 6.5, 5.5 L5

C1 = CIRCLE/ CENTER, P3, RADIUS, 1 P4


C3
L0 = LINE/ P1, P2
L1 = LINE/ (POINT/ 5, 1), LEFT, TANTO, C1 L6 L3
L2 = LINE/ (POINT/ 7, 1), PERPTO, L1
C2 = CIRCLE/ CENTER, P4, RADIUS, 0.5
L2
L3 = LINE/ (POINT/ 7, 1), RIGHT, TANTO, C2
P1 L0 L1
L4 = LINE/ (POINT/ 5, 6), LEFT, TANTO, C2 P2 P3
C3 = CIRCLE/ CENTER, (POINT/ 4, 6), (POINT/ 3, 6) x
C1
L5 = LINE/ (POINT/ 0, 6), (POINT/ 3, 6)
L6 = LINE/ P1, PERPTO, L5 P0

PL1 = PLANE/ P1, P2, P3


Motion Statements of APT Program

FROM/ P0 y
GO/ TO, L0, TO, PL1, TO, L6
C2
GODLTA/ 0,0,-1
L5 L4
GORGT/ L0, TO, C1 P4
C3
GORGT/ C1, TANTO, L1
GOFWD/ L1, TO, L2 L6 L3
GORGT/ L2, PAST, L3
GOLFT/ L3, TANTO, C2
L2
GOFWD/ C2, TANTO, L4 L1
P1 L0 P2 P3
GOFWD/ L4, PAST, C3
x
GOLFT/ C3, PAST, L5 C1

GOLFT/ L5, PAST, L6 P0


GOLFT/ L6, PAST, L0
GODLTA/ 0,0,1 Thickness= 1inch.
GOTO/ P0
APT Program
MACHIN/ MILL
P0 = POINT/ 0, 0, 3
P1 = POINT/ 1, 0
L1 = LINE/ P1, SLOPE, 0
L2 = LINE/ P1, SLOPE, 90
L3 = LINE/ PARLEL, L1, YLARGE, 2
L4 = LINE/ (POINT/ 4, 2), SLOPE, 1, L3
L5 = LINE/ (POINT/ 6, 4), ATANGL, 270, L4 P3
L6 = LINE/ (POINT/ 10, 0), PEPTO, L3 L4 L5
P2 = POINT/ INTOF, L3, L4 P2 P4
L3 L3
P3 = POINT/ INTOF, L4, L5
L2 L6
P4 = POINT/ INTOF, L5, L3
P1 L1
PL = PLANE/ P1, P2, P3
CUTTER/ 60
TOLER/ 0.1
SPINDL/ 200 P0
COOLNT/ ON
FEDRAT/ 20
APT Program
MACHIN/ MILL
P0 = POINT/ 0, 0, 3
P1 = POINT/ 1, 0
L1 = LINE/ P1, SLOPE, 0
L2 = LINE/ P1, SLOPE, 90
L3 = LINE/ PARLEL, L1, YLARGE, 2
L4 = LINE/ (POINT/ 4, 2), SLOPE, 1, L3
L5 = LINE/ (POINT/ 6, 4), ATANGL, 270, L4
L5 L4
L6 = LINE/ (POINT/ 10, 0), PEPTO, L3
P2 = POINT/ INTOF, L3, L4
L3
P3 = POINT/ INTOF, L4, L5
L6 L2
P4 = POINT/ INTOF, L5, L3
L1
PL = PLANE/ P1, P2, P3
CUTTER/ 60
TOLER/ 0.1
P0
SPINDL/ 200
COOLNT/ ON
FEDRAT/ 20

You might also like