3M Health Care Particulate Respirator and Surgical Mask, 1860, N95

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

3M™ Health Care Particulate

Respirator and Surgical Mask,


1860, N95
Key Features
• NIOSH approved N95 rating
• FDA cleared for use as a surgical mask
• Fluid Resistant 120 mmHg
• Flammability Rating Class I
• Adjustable nose clip
• Braided and stapled headbands

Material Composition
• Straps – Braided Polyisoprene
• Staples - Steel
• Nose Clip – Aluminum
• Nose Foam – Polyurethane Foam Do Not Use For
• Filter – Polypropylene • DO NOT use in industrial settings
• Shell – Polyester • DO NOT use for gases or vapors (i.e.
• Coverweb - Polypropylene anesthetic gases such as isoflurane or vapors
• Not made with natural rubber latex from sterilants such as glutaraldehyde.)
• Approximate weight of product: 0.40 oz. • DO NOT use in any manner not indicated in the
• See the 3M Technical Bulletin - Cellulose User Instructions
Certification - Filtering Facepiece Respirators for
Approvals and Standards
information about which 3M respirators contain
cellulose • NIOSH approved N95 respirator
• Meets NIOSH 42 CFR 84 N95 requirements
Country of Origin for a minimum 95% filtration efficiency against
Made in the USA with globally sourced materials solid and liquid aerosols that do not contain oil.
• NIOSH approval number: TC-84A-0006
Use For • FDA cleared for use as a surgical mask
• Intended to be worn by operating room • Health Canada Class I medical device
personnel during surgical procedures to help
• Bacterial Filtration Efficiency F2101 >99% BFE
protect both the surgical patient and the
• Assigned Protection Factor (APF 10) per US
operating room personnel from transfer of
OSHA and Canada CSA
microorganisms, body fluids, and particulate
material.
• Always follow User Instructions and use in
manners as indicated

Ordering Information
Respirators/
Description UPC ID # Boxes/Case Each/Case
Box
Health Care
Particulate
50707387419429 70-0706-1236-4 20 6 120
Respirator,
1860
Time Use Limitation Acceptable Fit Test Protocols
Respirator may be used until damaged, breathing
becomes difficult or contaminated with blood or Acceptable with this
Fit Test Protocol*
body fluids. Discard after every use when used for product?
surgical procedures. Follow national, state, local, Saccharin ☒
and facility infection control guidance and policies. BitrexTM

Qualitative
Shelf Life and Storage Protocols Irritant

• 5 years from the date of manufacture Smoke
• Use By date on box in YYYY-MM-DD format Isoamyl

• Store respirators in the original packaging, Acetate
away from contaminated areas, dust, sunlight, Quantitative Protocols ☒
extreme temperatures, excessive moisture, and
damaging chemicals *Refer to OSHA 1910.134
• Store in temperatures between -4°F
(-20°C) and +86°F (+30°C) and not exceeding
80% RH

WARNING!
This respirator helps protect against certain
particulate contaminants but does not eliminate
exposure to or the risk of contracting any disease
or infection. Before use, the wearer must read and
understand the User Instructions provided as a part
of the product packaging. Follow all local
regulations. In the U.S., a written respiratory
protection program must be implemented meeting
all the requirements of OSHA 1910.134, including
training, fit testing and medical evaluation. In
Canada, CSA standard Z94.4 requirements must
be met and/or requirements of the applicable
jurisdiction, as appropriate. Misuse may result in
sickness or death. For correct use, consult
supervisor and the User Instructions, or call 3M
Health Care in USA at 1-800-228-3957 and in
Canada at 1-800-267-4414.

Infection Prevention Division


3M Health Care
2510 Conway Avenue
St. Paul, MN 55144-1000 3M is a trademark of 3M Company
Please recycle. Printed in U.S.A
1-800-228-3957 © 3M 2017. All rights reserved.
3M.com/medical

You might also like