Scribd
Upload
60 views1 page

Valve Part Number Classification

This document outlines the classification system for valve part numbers. The part number contains codes that indicate the valve type, pressure rating, nominal diameter, and flow rate. For example, VVG44.25-10 represents a 2-way plug and seat valve with a PN16 pressure rating, 25mm nominal diameter, and 10 cubic meters per hour flow rate. Not all combinations of codes result in valid part numbers.

Uploaded by

Abd Elrahman Hamdy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views1 page

Valve Part Number Classification

This document outlines the classification system for valve part numbers. The part number contains codes that indicate the valve type, pressure rating, nominal diameter, and flow rate. For example, VVG44.25-10 represents a 2-way plug and seat valve with a PN16 pressure rating, 25mm nominal diameter, and 10 cubic meters per hour flow rate. Not all combinations of codes result in valid part numbers.

Uploaded by

Abd Elrahman Hamdy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VALVE PART NUMBER CLASSIFICATION

Valves V V G 4 4 . 2 5 - 1 0
V = Valve
V = 2-Way Plug & Seat
X = 3-Way Plug & Seat
M = 3-Way with T-Bypass
A = 2-Way Ball Valves
B = 3-Way Slipper / Ball Valves
C = Slipper Valves 4-Way
K = Butterfly Valves
P = Pressure controlled Valves
F = Flanged
G = Male Threaded
I= Female Threaded
K = Compression Fittings
P = Serto fittings
PN Class 2= PN 6
3= PN 10
4= PN 16
5= PN 25
6= PN 40
Production Series

DN = Nominal Diameter in mm
Kvs = Flow in (m3/h) at pressure drop of 100 (kPa)

Note: Not all combinations are valid part numbers.

- BT PRODUCTS -

You might also like