Scribd
Upload
69 views3 pages

SuperCapacitors Explained

Supercapacitors, also called ultracapacitors or double-layer capacitors, can store much larger amounts of charge than ordinary capacitors, ranging from a few farads to thousands of farads. Unlike batteries, supercapacitors can charge and discharge rapidly and have over a million charge/discharge cycles. However, their energy density is lower than lithium-ion batteries. Supercapacitors are best suited for applications requiring rapid charging/discharging like regenerative braking, rather than portable devices, due to their lower energy density compared to batteries.

Uploaded by

arnoldo3551
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
69 views3 pages

SuperCapacitors Explained

Supercapacitors, also called ultracapacitors or double-layer capacitors, can store much larger amounts of charge than ordinary capacitors, ranging from a few farads to thousands of farads. Unlike batteries, supercapacitors can charge and discharge rapidly and have over a million charge/discharge cycles. However, their energy density is lower than lithium-ion batteries. Supercapacitors are best suited for applications requiring rapid charging/discharging like regenerative braking, rather than portable devices, due to their lower energy density compared to batteries.

Uploaded by

arnoldo3551
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

https://www.homemade-circuits.

com/supercapacitors-explained/

Homemade Circuit Projects


Search this website:
Battery Chargers | Solar | Inverter | LED | Arduino | Free Energy | Contact | Disclaimer | Privacy Policy
You are here: Home / How it Works / SuperCapacitors Explained

SuperCapacitors Explained
by Girish Radhakrishnan
Last Updated on June 20, 2018 by Swag 2 Comments

In this post we are going to understand what a supercapacitor is, how closely similar or
different to an ordinary capacitor, where it is used and we will be doing apples to apples
comparison between batteries and supercapacitors to find out which one of them is superior.
Let’s understand the basics of an ordinary capacitor.

How Ordinary Capacitor Works


A capacitor is a passive electronic component which can store small amount of electrostatic
energy between the interleaved conductive and dielectric material.
We can charge and discharge the capacitor at rapid rate; due to this property we use them as
voltage smoothers in all power supply circuits.
All the capacitors have some specification coated on the body, such as operating temperature,
operating voltage, and value of the capacitor which is usually range from few pico-farads to few
thousand micro-farads.
The capacitors which we find usually on consumer grade electronics are ceramic, polyester,
paper, etc. These types of capacitor usually have low capacitance in the range of few pico-
farads to less than a micro-farad.
The one with higher capacitance are electrolytic type, which has capacitance ranging from
0.1uF to several thousand microfarads.
The electrolytic capacitor increases its charge storage capacity by adding a tissue soaked with
some chemical electrolyte as dielectric and either of the side with aluminium foil, as shown in
figure.

The stack of aluminium and tissue is rolled into cylinder form and housed into aluminium
chassis. The diameter of the roll, height and thickness of the tissue determines the various
parameters of the capacitor.
The electrolytic capacitors are polarized, which means it has anode and cathode terminal and
we should not be interchanged the input supply polarity to the capacitor as we do on other type
of capacitors.

How Supercapacitors Work


Supercapacitor is also called as Ultracapacitor or double layered capacitor. The supercapacitor
has humongous charge storing capacity and it is usually measured in Farad (without micro or
pico or nano prefixes).
A supercapacitor can range from few Farads to few thousand Farads. Unlike ordinary
capacitors, the supercapacitor has lower operating voltage, which is usually between 2.5V to
2.7V.
They are connected in series and parallel configuration to increase the throughput from the
capacitor bank.
The supercapacitors are utilized where batteries can’t handle the given task efficiently, for
instant regenerative braking in vehicles. The kinetic energy is converted to electrical energy and
stored for a while and reused to accelerate the vehicle.
This mechanism improves overall efficiency of vehicle. But using batteries alone, the energy
capture is not efficient. Many car manufactures are experimenting with supercapacitor in
combination with batteries and reportedly improved overall efficiency of the system.
Supercapacitor has better charge and discharge cycles compare to batteries. A typical lithium-
ion battery found in our smartphones has roughly 1000 charge and discharge cycles, where as
a supercapacitor has over 1 million charge and discharge cycles.
Batteries deteriorate its effective capacity when the battery is discharged below certain voltage
for prolong time. A supercapacitor has no such limits; it can go all the way to zero volts.
But leaving any capacitor over prolong period of time like a year or so without charging can also
deteriorate its charge holding capacity due to some chemical reaction between plates of the
capacitor.

Construction of Supercapacitor:
The construction of supercapacitors are fundamentally same as ordinary capacitor only the
difference is the type of material used and some method is utilized to increase the energy
storing capacity.
Supercapacitors have conductive plates on either side of the separator soaked in electrolyte and
the separator is a very thin dielectric materiel made from plastic or carbon or paper.
The separator is made very thin compare to ordinary capacitor to increase efficiency of ion
transfer between plates.
The supercapacitors are sometimes referred as double-layer; this is because when the plates on
either sides charge up it produces charge on either side of the separator as shown in figure.

By now you would have an idea about supercapacitor and its fundamental functioning.

Battery vs Supercapacitor:
Let’s compare energy density and weight in batteries and supercaps.
Lithium-ion and lithium-polymer has the highest energy density compare to any other battery
technology available commercially. This is the reason why our smartphones and other portable
electronics are built with li-ion/polymer.
The energy density of supercaps is pretty low compare to lithium batteries thus making it ideal
only for non-portable devices.
Supercaps are very good at rapid charging and discharging. This cannot be achieved with
battery due to higher internal resistance in all kinds of batteries.
If we try to discharge the battery beyond its safer current limit, we might damage the battery.
This is because the batteries possesses internal resistance and generate heat. The generated
thermal energy is enough to create irreversible damage to battery capacity.
In supercaps, internal resistance is very small, even smaller than internal resistance in some
automobile batteries which is designed to provide high current. The chance of supercapacitor
getting damaged due to thermal is pretty low.
The batteries can hold the charge for very long period of time, but for supercaps self-discharge
is a problem and not suitable for storing energy for long period of time.
Now its conclusion time,
So which one of them is superior? Probably none of them are superior to each other. Batteries
have great portability but, supercaps have very high charging and discharging rate. At end of
the day it depends on the application what we use and this decides which one of them is most
suitable.
Let us know in the comment section, do you think one day supercapacitors will replace batteries
due to rapid development in technology.

Previous: Buzzer Circuit with Incrementing Beep Rate


Next: SG3525 Full Bridge Inverter Circuit

You may also like:


 How to Understand and Use Transistors in Circuits
 How to Design an UPS Circuit – Tutorial
 Understanding Transistor 2N3904
 3.3V, 5V Voltage Regulator Circuits

Filed Under: How it Works, Tutorial

Comments
1. 9707a392-a733-11e5-ac1d-d7e256602c6e says
February 19, 2017 at 1:26 pm
Thankyou very much for your nice information as usual.How can we use supercap.for
emergency light?and how to build a charger for it?
Reply
o Swagatam says
February 20, 2017 at 4:17 am
you will require many capacitors in parallel for making a an emergency light from
it, and select an LED whose consumption allows the backup to last for the
required amount of time.
charger controller is not required, but make sure that the supply input voltage to
the super capacitors is not higher than its breakdown voltage limit.
Reply

You might also like