Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    5.00 P.M (Malaysia Time) 12 June 2020 (Friday) Deduction of Lab Marks 50 - 100%

    Uploaded by

    Zeyad Tareq Al Sarori
    This document summarizes the results of hardened concrete cube tests conducted for 7 days. Three concrete cubes from each of three groups with different design strengths (20, 30, and 40 MPa) were tested for compressive strength. The weight and maximum load of each cube was measured and used to calculate the compressive strength and percentage of the design strength achieved at 7 days. The average weight, load, compressive strength and percentage strength were also calculated for each group of cubes. Students are required to calculate all values in the provided table and submit a lab report by the given deadline.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    5.00 P.M (Malaysia Time) 12 June 2020 (Friday) Deduction of Lab Marks 50 - 100%

    Uploaded by

    Zeyad Tareq Al Sarori
    30 views1 page
    This document summarizes the results of hardened concrete cube tests conducted for 7 days. Three concrete cubes from each of three groups with different design strengths (20, 30, and 40 MPa) were tested for compressive strength. The weight and maximum load of each cube was measured and used to calculate the compressive strength and percentage of the design strength achieved at 7 days. The average weight, load, compressive strength and percentage strength were also calculated for each group of cubes. Students are required to calculate all values in the provided table and submit a lab report by the given deadline.

    Original Description:

    hi

    Original Title

    Lab 4(i)_46ce632874b9560d0b78d14e125940b6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the results of hardened concrete cube tests conducted for 7 days. Three concrete cubes from each of three groups with different design strengths (20, 30, and 40 MPa) were tested for compressive strength. The weight and maximum load of each cube was measured and used to calculate the compressive strength and percentage of the design strength achieved at 7 days. The average weight, load, compressive strength and percentage strength were also calculated for each group of cubes. Students are required to calculate all values in the provided table and submit a lab report by the given deadline.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views1 page

    5.00 P.M (Malaysia Time) 12 June 2020 (Friday) Deduction of Lab Marks 50 - 100%

    Uploaded by

    Zeyad Tareq Al Sarori
    This document summarizes the results of hardened concrete cube tests conducted for 7 days. Three concrete cubes from each of three groups with different design strengths (20, 30, and 40 MPa) were tested for compressive strength. The weight and maximum load of each cube was measured and used to calculate the compressive strength and percentage of the design strength achieved at 7 days. The average weight, load, compressive strength and percentage strength were also calculated for each group of cubes. Students are required to calculate all values in the provided table and submit a lab report by the given deadline.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    DEPARTMENT OF CIVIL ENGINEERING,

    FACULTY OF ENGINEERING & BUILT ENVIRONMENT, UKM

    LAB 4: HARDENED CONCRETE TESTS FOR 7 DAYS

    Date : 12 May 2020 (Tuesday)

    Time : 9.00 a.m - 12.00 p.m

    Demo : Dr. Mohd Reza Azmi

    Venue : Online Concrete Lab

    No. Laboratory Results / Calculations Unit / Formula / Symbol Group 1 Group 2 Group 3
    Lab 4(i): Compressive Strength Test

    1 Concrete Design Strength for 28 Days N/mm 2 @ MPa 20 30 40

    2 Cross-sectional Area of Each Cube Specimen, A mm 2 (150 mm x 150 mm = 22,500 mm2)


    Compressive Strength, σ c = F / A
    where,
    3
    F = Load (kN) A =
    Cross-sectional Area of Each Cube Specimen = 22,500 mm2
    For Cube 1:

    1 Weight of Cube 1 at 7 Days (W1 ) kg 7.81 7.92 8.01

    2 Load value of Cube 1 at 7 Days, F (F1 ) kN 278.3 398.3 548.3


    Compressive Strength of Cube 1 at 7 Days, σ c = F / A (σ 1 )
    where,
    3
    F = Load (kN) of Cube 1 at 7 Days N/mm 2 @ MPa 12.4 17.7 24.4

    A = Cross-sectional Area of Each Cube Specimen= 22,500 mm2


    Cube 1 Strength Percentage at 7 Days (SP1)
    4 = % 61.8 59.0 60.9

    For Cube 2:

    1 Weight of Cube 2 at 7 Days (W2 ) kg 7.71 8.02 7.89

    2 Load value of Cube 2 at 7 Days, F (F2 ) kN 268.1 386.4 534.9


    Compressive Strength of Cube 2 at 7 Days, σ c = F / A (σ 2 )
    where,
    3
    F = Load (kN) of Cube 2 at 7 Days N/mm 2 @ MPa 11.9 17.2 23.8

    A = Cross-sectional Area of Each Cube Specimen= 22,500 mm2


    Cube 2 Strength Percentage at 7 Days (SP2)
    4 = % 59.6 57.2 59.4

    For Cube 3:

    1 Weight of Cube 3 at 7 Days (W3 ) kg 7.93 7.88 8.22

    2 Load value of Cube 3 at 7 Days, F (F3 ) kN 255.2 402.1 525.5


    Compressive Strength of Cube 3 at 7 Days, σ c = F / A (σ 3 )
    where,
    3
    F = Load (kN) of Cube 3 at 7 Days N/mm 2 @ MPa 11.3 17.9 23.4

    A = Cross-sectional Area of Each Cube Specimen= 22,500 mm2


    Cube 3 Strength Percentage at 7 Days (SP3)
    4 = % 56.7 59.6 58.4

    Average Weight of Cubes (Cube 1, Cube 2 & Cube 3):

    1 W = (W1 + W2 + W3 ) / 3 kg 7.82 7.94 8.04

    Average of Load, F (Cube 1, Cube 2 & Cube 3):


    1 F = (F1 + F2 + F3 ) / 3 kN 267.2 395.6 536.2

    Average of Compressive Strength, σavg (Cube 1, Cube 2 & Cube 3):

    1 σ avg = (σ 1 + σ 2 + σ 3 ) / 3 N/mm 2 @ MPa 11.9 17.6 23.8

    Average of Strength Percentage, % (Cube 1, Cube 2 & Cube 3):


    1 Average of Strength Percentage = (SP1 + SP2 + SP3) / 3 % 59.4 58.6 59.6

    Notes:

    1. All groups are required to calculate all values in the green's highlighted table with using formula given in the table above.

    2. Please submit group's report for Lab no. 4 (i, ii, iii & iv) before 5.00 p.m (Malaysia Time) 12th June 2020 (Friday) in pdf format only and submit in the UKMFolio system.
    3. Late or fail to submit the lab report before duedate given will cause deduction of lab marks 50 - 100%.

    You might also like