Scribd
Upload
47 views1 page

5.00 P.M (Malaysia Time) 12 June 2020 (Friday) Deduction of Lab Marks 50 - 100%

This document provides the results of flexure strength tests conducted on hardened concrete specimens for 7 days. Three groups tested concrete designed to have 28-day strengths of 20, 30, and 40 MPa. For each of three beams per group, the document records the beam weight, maximum load at failure, and calculated modulus of rupture. It averages the modulus of rupture for each group's three beams. The notes specify that groups must calculate all values in the provided table and submit their lab report by the given deadline to avoid mark deductions.

Uploaded by

Zeyad Tareq Al Sarori
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views1 page

5.00 P.M (Malaysia Time) 12 June 2020 (Friday) Deduction of Lab Marks 50 - 100%

This document provides the results of flexure strength tests conducted on hardened concrete specimens for 7 days. Three groups tested concrete designed to have 28-day strengths of 20, 30, and 40 MPa. For each of three beams per group, the document records the beam weight, maximum load at failure, and calculated modulus of rupture. It averages the modulus of rupture for each group's three beams. The notes specify that groups must calculate all values in the provided table and submit their lab report by the given deadline to avoid mark deductions.

Uploaded by

Zeyad Tareq Al Sarori
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DEPARTMENT OF CIVIL ENGINEERING,

FACULTY OF ENGINEERING & BUILT ENVIRONMENT, UKM

LAB 4: HARDENED CONCRETE TESTS FOR 7 DAYS

Date : 12 May 2020 (Tuesday)


Time : 9.00 a.m - 12.00 p.m
Demo : Dr. Mohd Reza Azmi
Venue : Online Concrete Lab

No. Laboratory Results / Calculations Unit / Formula / Symbol Group 1 Group 2 Group 3
Lab 4(iii): Flexure Strength Test

1 Concrete Design Strength for 28 Days N/mm 2 @ MPa 20 30 40


2 Length of The Specimen, l mm 450 450 450

3 Average Width of The Specimen, b mm 100 100 100


4 Average Depth of The Specimen, d mm 100 100 100
Modulus of Rupture, R
=

where,
5
P = Load (kN) l N/mm 2 @ MPa
= Length of The Specimen = 450 mm
b = Average Width of The Specimen = 100 mm
d = Average Depth of The Specimen = 100 mm
For Beam 1:

1 Weight of Beam 1 at 7 Days kg 11.33 11.56 12.04

2 Maximum Load value of Beam 1 at 7 Days, P kN 8.34 8.50 8.56


Modulus of Rupture, R (R1 )
2
3 = N/mm @ MPa 3.75 3.83 3.85

For Beam 2:

1 Weight of Beam 2 at 7 Days kg 11.11 11.32 12.15


2 Maximum Load value of Beam 2 at 7 Days, P kN 8.68 8.65 8.71
Modulus of Rupture, R (R2 )
3 = N/mm 2 @ MPa 3.91 3.89 3.92

For Beam 3:

1 Weight of Beam 3 at 7 Days kg 11.48 11.87 12.25


2 Maximum Load value of Beam 3 at 7 Days, P kN 8.45 8.95 9.56
Modulus of Rupture, R (R3 )
3 = N/mm 2 @ MPa 3.80 4.03 4.30

Average Modulus of Rupture, R avg (Beam 1, Beam 2 & Beam 3):

1 R avg = (R1 + R2 + R3 ) / 3 N/mm 2 @ MPa 3.82 3.92 4.02

Notes:

1. All groups are required to calculate all values in the green's highlighted table with using formula given in the table above.

2. Please submit group's report for Lab no. 4 (i, ii, iii & iv) before 5.00 p.m (Malaysia Time) 12th June 2020 (Friday) in pdf format only and submit in the UKMFolio system.
3. Late or fail to submit the lab report before duedate given will cause deduction of lab marks 50 - 100%.

You might also like