0% found this document useful (0 votes)
108 views1 page

Surface-Mount 4-Circuit Low-Side Switch Array SPF5002: External Dimensions Features

The SPF5002 is a 4-channel low-side switch array that allows control of outputs using CMOS logic level inputs. It has built-in protection from overcurrent, overvoltage, and high temperatures. The device has a maximum power supply voltage of 40V, output voltage of 40V, and can handle a 1A output current with a maximum power dissipation of 2W. It uses DMOS FETs for switching and has characteristics such as low on-resistance and overvoltage/overcurrent protection.

Uploaded by

katty cumbe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
108 views1 page

Surface-Mount 4-Circuit Low-Side Switch Array SPF5002: External Dimensions Features

The SPF5002 is a 4-channel low-side switch array that allows control of outputs using CMOS logic level inputs. It has built-in protection from overcurrent, overvoltage, and high temperatures. The device has a maximum power supply voltage of 40V, output voltage of 40V, and can handle a 1A output current with a maximum power dissipation of 2W. It uses DMOS FETs for switching and has characteristics such as low on-resistance and overvoltage/overcurrent protection.

Uploaded by

katty cumbe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Surface-mount 4-circuit Low-side Switch Array SPF5002

Features External Dimensions (unit: mm)


● DMOS 4ch output 12.2 ±0.2
● Allows ON/OFF using C-MOS logic level
10.5 ±0.2
+0.1
1.0 –0.05
● Built-in overcurrent, overvoltage and thermal protection circuits Fin
16 9 thickness

Absolute Maximum Ratings

7.5 ±0.2
(Ta=25ºC)
Parameter Symbol Ratings Unit Conditions

+0.2
2.0 –0.8
Power supply voltage VB 40 V
Output terminal voltage VOUT 40 V 1 8
+0.15
Input terminal voltage VIN –0.5 to +7.5 V 1.27±0.25 0.4 –0.05

2.5 ±0.2
+0.15
Output current IO 1 A 0.25 –0.05
Power Dissipation PD 2 W

Storage temperature Tstg –40 to +150 ºC

Channel temperature Tch 150 ºC

Output avalanche capability EAV 100 mJ Single pulse

Equivalent Circuit Diagram


VB VOUT 1
Gate Protction

Electrical Characteristics (VB =14V, Tc= –40 to +125ºC unless otherwise specified)
Reg. REF

Ratings OVP Gate Driver


Parameter Symbol Unit Conditions
min typ max TSD
OCP
Power supply voltage VBopr 5.5 32 V P-GND
VIN 1
Quiescent circuit current Iq 4 6 mA All outputs are OFF
250 kΩ typ
Hi output VIN 3.5 5.5 V IO = 1.5A
Input voltage
Lo output VIN –0.5 1.5 V
VIN 2 VOUT 2
Hi output I IN 50 µA VIN = 7V
Input current
Lo output I IN 30 µA VIN = 0V VIN 3 VOUT 3

0.4 V IO = 0.5A
Output ON voltage VDS (on) VIN 4 VOUT 4
0.7 V IO = 1A

0.4 Ω Ta = 25ºC L-GND


Output ON resistance RDS (on)
0.5 Ω Ta = 25ºC, VB = 5.5V

Output clamp voltage VOUT (clamp) 41 45 55 V VB = 14V, ID = 1A

Output leak current I OH 100 µA VO = 30V


Circuit Example
Forward voltage of output stage
VF 1.6 V I F = 0.5A
diode

Overvoltage protection starting Stepper motor


VB (ovp) 32 40 V
voltage VCC

Thermal protection starting 2 10 7 15 5


TTSD 151 165 ºC
temperature 4
OUT1 OUT3 OUT2 OUT4 VB
IN1
Overcurrent protection starting 6
IS 1.9 A IN2
current 12
IN3 SPF5002
14
IN4
TON 15 µS RL = 14Ω, I O = 1A L-GND P-GND
CONTROL
Output transfer time
TOFF 15 µS RL = 14Ω, I O = 1A UNIT 13 1,9

Output rise time Tr 15 µS RL = 14Ω, I O = 1A

Output fall time Tf 15 µS RL = 14Ω, I O = 1A Use L-GND and P-GND being connected.
Truth table
VIN VO
H L
L H

Timing Chart
OVP

VB
VOUT

VIN
Normal Overvoltage Overheat Overcurrent

* Self-excited frequency is used in the overcurrent protection.


40

You might also like