Scribd
Upload
158 views2 pages

Looking For A Board For A Very Specific Use That Arduino Doesn't Make?

The MKR VIDOR 4000 is a highly configurable and powerful microcontroller board that allows users to essentially create their own controller board. It contains an ARM Cortex-M0+ 32-bit microcontroller, 8MB of SDRAM, WiFi/BLE connectivity, and a programmable Cyclone 10 FPGA accelerator. The FPGA can be configured for functions like UARTs, SPI, PWM, encoders, DACs, and more. It is optimized for applications requiring high-speed digital audio/video processing.

Uploaded by

Otaku James
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views2 pages

Looking For A Board For A Very Specific Use That Arduino Doesn't Make?

The MKR VIDOR 4000 is a highly configurable and powerful microcontroller board that allows users to essentially create their own controller board. It contains an ARM Cortex-M0+ 32-bit microcontroller, 8MB of SDRAM, WiFi/BLE connectivity, and a programmable Cyclone 10 FPGA accelerator. The FPGA can be configured for functions like UARTs, SPI, PWM, encoders, DACs, and more. It is optimized for applications requiring high-speed digital audio/video processing.

Uploaded by

Otaku James
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MKR VIDOR 4000

Looking for a board for a


very specific use that
Arduino doesn’t make?

Or maybe you want a more complex


central board, optimized for your particular
needs that will interface with all other
Arduino boards and devices. The MKR
VIDOR 4000 is highly configurable and
powerful, and it perform high-speed digital
audio and video processing.
STORE.ARDUINO.CC/ARDUINO-MKR-VIDOR-4000
MKR VIDOR 4000
ARDUINO MICROCONTROLLER

With the MKR VIDOR 4000 you can configure it Microcontroller SAMD21

the way you want; you can essentially create Architecture ARM Cortex-M0+ 32bit

your own controller board. It comes loaded plus Cyclone 10


Operating Voltage 3.3V
with hardware and potential: an 8 MB SDRAM; a
Flash Memory 256 KB
2 MB QSPI Flash chip — 1 MB allocated for user
SRAM 32 KB
applications; a Micro HDMI connector; an MIPI Clock Speed 48 MHz
camera connector; and Wifi & BLE powered by DC Current per I/O Pin 3 mA (I/O Pins)
U-BLOX NINA W10 Series. It also includes the
classic MKR interface on which all pins are GENERAL
driven both by SAMD21 and FPGA. Plus, it has a
Mini PCI Express connector with up to 25 user Connectivity Wi-Fi w/ NINA W102

programmable pins. Peripherals Programmable Cyclone


10 accelerator w/ 8MB RAM
Digital I/O Pins 20 (headers) +32 (mPCI)
The FPGA contains 16K Logic Elements, 504 KB
Interfaces I2C, SPI, UART, mPCI express
of embedded RAM, and 56 18x18 bit HW
MIPI Camera, miniHDMI
multipliers for high-speed DSP. Each pin can
PWM Output 12 (D21)/22 (Cyclone 10)
toggle at over 150 MHz and can be configured Analog I/O Pins 7/1
for functions such as UARTs, (Q)SPI, high Power Consumption < 100 mA < 10 mA
resolution/high frequency PWM, quadrature (low power, Wi-Fi off)
encoder, I2C, I2S, Sigma Delta DAC, etc. Weight 9 g
Product Code ABX00022

You might also like