CIRCLIPS (AUSTRALIA) PTY LTD Phone: 03 8366 2770 Email: [email protected].

au
D1400 External Circlips - For Shafts - DIN 471
Data Chart Reference Nominal Circlip Dimensions Groove Dimensions
Number Diameter Thickness Tolerance Unstressed Tolerance Lug (a) Beam (b) Lug Hole (d5) Weight Groove Tolerance Min Groove Radial Depth Pliers
(d1) (s) Diameter (d3) max ≈ min Kg/1,000 Diameter (d2) Width (m) of Groove (t)
D1400-0030 3 0.40 - 0.05 2.7 + 0.04 / - 0.15 1.9 0.8 1.0 0.017 2.8 - 0.04 0.50 0.10 HA 0
D1400-0040 4 0.40 - 0.05 3.7 + 0.04 / - 0.15 2.2 0.9 1.0 0.022 3.8 - 0.04 0.50 0.10 HA 0
D1400-0050 5 0.60 - 0.05 4.7 + 0.04 / - 0.15 2.5 1.1 1.0 0.066 4.8 - 0.04 0.70 0.10 HA 0
D1400-0060 6 0.70 - 0.05 5.6 + 0.04 / - 0.15 2.7 1.3 1.2 0.084 5.7 - 0.04 0.80 0.15 HA 0
D1400-0070 7 0.80 - 0.05 6.5 + 0.06 / - 0.18 3.1 1.4 1.2 0.121 6.7 - 0.06 0.90 0.15 HA 0
D1400-0080 8 0.80 - 0.05 7.4 + 0.06 / - 0.18 3.2 1.5 1.2 0.158 7.6 - 0.06 0.90 0.20 HA 0
D1400-0090 9 1.00 - 0.06 8.4 + 0.06 / - 0.18 3.3 1.7 1.2 0.300 8.6 - 0.06 1.10 0.20 HA 0
D1400-0100 10 1.00 - 0.06 9.3 + 0.10 / - 0.36 3.3 1.8 1.5 0.340 9.6 - 0.11 1.10 0.20 HA 1
D1400-0110 11 1.00 - 0.06 10.2 + 0.10 / - 0.36 3.3 1.8 1.5 0.410 10.5 - 0.11 1.10 0.25 HA 1
D1400-0120 12 1.00 - 0.06 11.0 + 0.10 / - 0.36 3.3 1.8 1.7 0.500 11.5 - 0.11 1.10 0.25 HA 1
D1400-0130 13 1.00 - 0.06 11.9 + 0.10 / - 0.36 3.4 2.0 1.7 0.530 12.4 - 0.11 1.10 0.30 HA 1
Manufacturers Choice D1400-0140 14 1.00 - 0.06 12.9 + 0.10 / - 0.36 3.5 2.1 1.7 0.640 13.4 - 0.11 1.10 0.30 HA 1
D1400-0150 15 1.00 - 0.06 13.8 + 0.10 / - 0.36 3.6 2.2 1.7 0.670 14.3 - 0.11 1.10 0.35 HA 1
D1400-0160 16 1.00 - 0.06 14.7 + 0.10 / - 0.36 3.7 2.2 1.7 0.700 15.2 - 0.11 1.10 0.40 HA 1
D1400-0170 17 1.00 - 0.06 15.7 + 0.10 / - 0.36 3.8 2.3 1.7 0.820 16.2 - 0.11 1.10 0.40 HA 1
D1400-0180 18 1.20 - 0.06 16.5 + 0.10 / - 0.36 3.9 2.4 2.0 1.110 17.0 - 0.11 1.30 0.50 HA 2
D1400-0190 19 1.20 - 0.06 17.5 + 0.10 / - 0.36 3.9 2.5 2.0 1.220 18.0 - 0.11 1.30 0.50 HA 2
D1400-0200 20 1.20 - 0.06 18.5 + 0.13 / - 0.42 4.0 2.6 2.0 1.300 19.0 - 0.13 1.30 0.50 HA 2
D1400-0210 21 1.20 - 0.06 19.5 + 0.13 / - 0.42 4.1 2.7 2.0 1.420 20.0 - 0.13 1.30 0.50 HA 2
D1400-0220 22 1.20 - 0.06 20.5 + 0.13 / - 0.42 4.2 2.8 2.0 1.500 21.0 - 0.13 1.30 0.50 HA 2
Unstressed D1400-0230 23 1.20 - 0.06 21.5 + 0.13 / - 0.42 4.3 2.9 2.0 1.630 22.0 - 0.15 1.30 0.50 HA 2
D1400-0240 24 1.20 - 0.06 22.2 + 0.21 / - 0.42 4.4 3.0 2.0 1.770 22.9 - 0.21 1.30 0.55 HA 2
D1400-0250 25 1.20 - 0.06 23.2 + 0.21 / - 0.42 4.4 3.0 2.0 1.900 23.9 - 0.21 1.30 0.55 HA 2
D1400-0260 26 1.20 - 0.06 24.2 + 0.21 / - 0.42 4.5 3.1 2.0 1.960 24.9 - 0.21 1.30 0.55 HA 2
D1400-0270 27 1.20 - 0.06 24.9 + 0.21 / - 0.42 4.6 3.1 2.0 2.080 25.6 - 0.21 1.30 0.70 HA 2
D1400-0280 28 1.50 - 0.06 25.9 + 0.21 / - 0.42 4.7 3.2 2.0 2.920 26.6 - 0.21 1.60 0.70 HA 2
D1400-0290 29 1.50 - 0.06 26.9 + 0.21 / - 0.42 4.8 3.4 2.0 3.200 27.6 - 0.21 1.60 0.70 HA 2
D1400-0300 30 1.50 - 0.06 27.9 + 0.21 / - 0.42 5.0 3.5 2.0 3.320 28.6 - 0.21 1.60 0.70 HA 2
D1400-0310 31 1.50 - 0.06 28.6 + 0.21 / - 0.42 5.1 3.5 2.5 3.450 29.3 - 0.21 1.60 0.85 HA 2
D1400-0320 32 1.50 - 0.06 29.6 + 0.21 / - 0.42 5.2 3.6 2.5 3.540 30.3 - 0.25 1.60 0.85 HA 2
D1400-0330 33 1.50 - 0.06 30.5 + 0.25 / - 0.50 5.2 3.7 2.5 3.690 31.3 - 0.25 1.60 0.85 HA 2
D1400-0340 34 1.50 - 0.06 31.5 + 0.25 / - 0.50 5.4 3.8 2.5 3.800 32.3 - 0.25 1.60 0.85 HA 2
D1400-0350 35 1.50 - 0.06 32.2 + 0.25 / - 0.50 5.6 3.9 2.5 4.000 33.0 - 0.25 1.60 1.00 HA 2
D1400-0360 36 1.75 - 0.06 33.2 + 0.25 / - 0.50 5.6 4.0 2.5 5.000 34.0 - 0.25 1.85 1.00 HA 2
D1400-0370 37 1.75 - 0.06 34.2 + 0.25 / - 0.50 5.7 4.1 2.5 5.370 35.0 - 0.25 1.85 1.00 HA 2
D1400-0380 38 1.75 - 0.06 35.2 + 0.25 / - 0.50 5.8 4.2 2.5 5.620 36.0 - 0.25 1.85 1.00 HA 2
D1400-0390 39 1.75 - 0.06 36.0 + 0.25 / - 0.50 5.9 4.3 2.5 5.850 37.0 - 0.25 1.85 1.00 HA 2
D1400-0400 40 1.75 - 0.06 36.5 + 0.39 / - 0.90 6.0 4.4 2.5 6.030 37.5 - 0.25 1.85 1.25 HA 3
D1400-0410 41 1.75 - 0.06 37.5 + 0.39 / - 0.90 6.2 4.5 2.5 6.215 38.5 - 0.25 1.85 1.25 HA 3
D1400-0420 42 1.75 - 0.06 38.5 + 0.39 / - 0.90 6.5 4.5 2.5 6.500 39.5 - 0.25 1.85 1.25 HA 3
D1400-0440 44 1.75 - 0.06 40.5 + 0.39 / - 0.90 6.6 4.6 2.5 7.000 41.5 - 0.25 1.85 1.25 HA 3
D1400-0450 45 1.75 - 0.06 41.5 + 0.39 / - 0.90 6.7 4.7 2.5 7.500 42.5 - 0.25 1.85 1.25 HA 3
D1400-0460 46 1.75 - 0.06 42.5 + 0.39 / - 0.90 6.7 4.8 2.5 7.600 43.5 - 0.25 1.85 1.25 HA 3
D1400-0470 47 1.75 - 0.06 43.5 + 0.39 / - 0.90 6.8 4.9 2.5 7.500 44.5 - 0.25 1.85 1.25 HA 3
D1400-0480 48 1.75 - 0.06 44.5 + 0.39 / - 0.90 6.9 5.0 2.5 7.900 45.5 - 0.25 1.85 1.25 HA 3
D1400-0500 50 2.00 - 0.07 45.8 + 0.39 / - 0.90 6.9 5.1 2.5 10.200 47.0 - 0.25 2.15 1.50 HA 3
D1400-0520 52 2.00 - 0.07 47.8 + 0.39 / - 0.90 7.0 5.2 2.5 11.100 49.0 - 0.25 2.15 1.50 HA 3
D1400-0540 54 2.00 - 0.07 49.8 + 0.39 / - 0.90 7.1 5.3 2.5 11.300 51.0 - 0.30 2.15 1.50 HA 3
D1400-0550 55 2.00 - 0.07 50.8 + 0.46 / - 1.10 7.2 5.4 2.5 11.400 52.0 - 0.30 2.15 1.50 HA 3
D1400-0560 56 2.00 - 0.07 51.8 + 0.46 / - 1.10 7.3 5.5 2.5 11.800 53.0 - 0.30 2.15 1.50 HA 3

Whilst care has been taken in the production of this catalogue, Circlips (Australia) Pty Ltd is not liable for actions resulting from any incorrect data.
 CIRCLIPS (AUSTRALIA) PTY LTD Phone: 03 8366 2770 Email: [email protected]
D1400 External Circlips - For Shafts - DIN 471
Data Chart Reference Nominal Circlip Dimensions Groove Dimensions
Number Diameter Thickness Tolerance Unstressed Tolerance Lug (a) Beam (b) Lug Hole (d5) Weight Groove Tolerance Min Groove Radial Depth Pliers
(d1) (s) Diameter (d3) max ≈ min Kg/1,000 Diameter (d2) Width (m) of Groove (t)
D1400-0570 57 2.00 - 0.07 52.8 + 0.46 / - 1.10 7.3 5.5 2.5 12.200 54.0 - 0.30 2.15 1.50 HA 3
D1400-0580 58 2.00 - 0.07 53.8 + 0.46 / - 1.10 7.3 5.6 2.5 12.600 55.0 - 0.30 2.15 1.50 HA 3
D1400-0600 60 2.00 - 0.07 55.8 + 0.46 / - 1.10 7.4 5.8 2.5 12.900 57.0 - 0.30 2.15 1.50 HA 3
D1400-0620 62 2.00 - 0.07 57.8 + 0.46 / - 1.10 7.5 6.0 2.5 14.300 59.0 - 0.30 2.15 1.50 HA 3
D1400-0630 63 2.00 - 0.07 58.8 + 0.46 / - 1.10 7.6 6.2 2.5 15.900 60.0 - 0.30 2.15 1.50 HA 3
D1400-0650 65 2.50 - 0.07 60.8 + 0.46 / - 1.10 7.8 6.3 3.0 18.200 62.0 - 0.30 2.65 1.50 HA 3
D1400-0670 67 2.50 - 0.07 62.5 + 0.46 / - 1.10 7.9 6.4 3.0 20.300 64.0 - 0.30 2.65 1.50 HA 3
D1400-0680 68 2.50 - 0.07 63.5 + 0.46 / - 1.10 8.0 6.5 3.0 21.800 65.0 - 0.30 2.65 1.50 HA 3
D1400-0700 70 2.50 - 0.07 65.5 + 0.46 / - 1.10 8.1 6.6 3.0 22.000 67.0 - 0.30 2.65 1.50 HA 3
D1400-0720 72 2.50 - 0.07 67.5 + 0.46 / - 1.10 8.2 6.8 3.0 22.500 69.0 - 0.30 2.65 1.50 HA 3
D1400-0750 75 2.50 - 0.07 70.5 + 0.46 / - 1.10 8.4 7.0 3.0 24.600 72.0 - 0.30 2.65 1.50 HA 3
Manufacturers Choice D1400-0770 77 2.50 - 0.07 72.5 + 0.46 / - 1.10 8.5 7.2 3.0 25.700 74.0 - 0.30 2.65 1.50 HA 3
D1400-0780 78 2.50 - 0.07 73.5 + 0.46 / - 1.10 8.6 7.3 3.0 26.200 75.0 - 0.30 2.65 1.50 HA 3
D1400-0800 80 2.50 - 0.07 74.5 + 0.46 / - 1.10 8.6 7.4 3.0 27.300 76.5 - 0.30 2.65 1.75 HA 3
D1400-0820 82 2.50 - 0.07 76.5 + 0.46 / - 1.10 8.7 7.6 3.0 31.200 78.5 - 0.30 2.65 1.75 HA 3
D1400-0850 85 3.00 - 0.08 79.5 + 0.46 / - 1.10 8.7 7.8 3.5 36.400 81.5 - 0.35 3.15 1.75 HA 4
D1400-0870 87 3.00 - 0.08 81.5 + 0.54 / - 1.30 8.8 7.9 3.5 39.800 83.5 - 0.35 3.15 1.75 HA 4
D1400-0880 88 3.00 - 0.08 82.5 + 0.54 / - 1.30 8.8 8.0 3.5 41.200 84.5 - 0.35 3.15 1.75 HA 4
D1400-0900 90 3.00 - 0.08 84.5 + 0.54 / - 1.30 8.8 8.2 3.5 44.500 86.5 - 0.35 3.15 1.75 HA 4
D1400-0920 92 3.00 - 0.08 86.5 + 0.54 / - 1.30 9.0 8.4 3.5 46.000 88.5 - 0.35 3.15 1.75 HA 4
Unstressed D1400-0950 95 3.00 - 0.08 89.5 + 0.54 / - 1.30 9.4 8.6 3.5 49.000 91.5 - 0.35 3.15 1.75 HA 4
D1400-0970 97 3.00 - 0.08 91.5 + 0.54 / - 1.30 9.4 8.8 3.5 50.200 93.5 - 0.35 3.15 1.75 HA 4
D1400-0980 98 3.00 - 0.08 91.5 + 0.54 / - 1.30 9.4 8.8 3.5 50.200 94.5 - 0.35 3.15 1.75 HA 4
D1400-1000 100 3.00 - 0.08 94.5 + 0.54 / - 1.30 9.6 9.0 3.5 53.700 96.5 - 0.35 3.15 1.75 HA 4
D1400-1020 102 4.00 - 0.10 95.0 + 0.54 / - 1.30 9.7 9.2 3.5 78.000 98.0 - 0.54 4.15 2.00 HA 4
D1400-1050 105 4.00 - 0.10 98.0 + 0.54 / - 1.30 9.9 9.3 3.5 80.000 101.0 - 0.54 4.15 2.00 HA 4
D1400-1070 107 4.00 - 0.10 100.0 + 0.54 / - 1.30 10.0 9.5 3.5 81.000 103.0 - 0.54 4.15 2.00 HA 4
D1400-1080 108 4.00 - 0.10 100.0 + 0.54 / - 1.30 10.0 9.5 3.5 81.000 104.0 - 0.54 4.15 2.00 HA 4
D1400-1100 110 4.00 - 0.10 103.0 + 0.54 / - 1.30 10.1 9.6 3.5 82.000 106.0 - 0.54 4.15 2.00 HA 4
D1400-1120 112 4.00 - 0.10 105.0 + 0.54 / - 1.30 10.3 9.7 3.5 83.000 108.0 - 0.54 4.15 2.00 HA 4
D1400-1150 115 4.00 - 0.10 108.0 + 0.54 / - 1.30 10.6 9.8 3.5 84.000 111.0 - 0.54 4.15 2.00 HA 4
D1400-1170 117 4.00 - 0.10 110.0 + 0.54 / - 1.30 10.8 10.0 3.5 85.000 113.0 - 0.54 4.15 2.00 HA 4
D1400-1180 118 4.00 - 0.10 110.0 + 0.54 / - 1.30 10.8 10.0 3.5 85.000 114.0 - 0.54 4.15 2.00 HA 4
D1400-1200 120 4.00 - 0.10 113.0 + 0.54 / - 1.30 11.0 10.2 3.5 86.000 116.0 - 0.54 4.15 2.00 HA 4
D1400-1220 122 4.00 - 0.10 115.0 + 0.54 / - 1.30 11.2 10.3 4.0 88.000 118.0 - 0.54 4.15 2.00 HA 5
D1400-1250 125 4.00 - 0.10 118.0 + 0.54 / - 1.30 11.4 10.4 4.0 90.000 121.0 - 0.63 4.15 2.00 HA 5
D1400-1270 127 4.00 - 0.10 120.0 + 0.54 / - 1.30 11.4 10.5 4.0 95.000 123.0 - 0.63 4.15 2.00 HA 5
D1400-1280 128 4.00 - 0.10 120.0 + 0.54 / - 1.30 11.4 10.5 4.0 95.000 124.0 - 0.63 4.15 2.00 HA 5
D1400-1300 130 4.00 - 0.10 123.0 + 0.63 / - 1.50 11.6 10.7 4.0 100.000 126.0 - 0.63 4.15 2.00 HA 5
D1400-1320 132 4.00 - 0.10 125.0 + 0.63 / - 1.50 11.7 10.8 4.0 103.000 128.0 - 0.63 4.15 2.00 HA 5
D1400-1350 135 4.00 - 0.10 128.0 + 0.63 / - 1.50 11.8 11.0 4.0 104.000 131.0 - 0.63 4.15 2.00 HA 5
D1400-1370 137 4.00 - 0.10 130.0 + 0.63 / - 1.50 11.9 11.0 4.0 107.000 133.0 - 0.63 4.15 2.00 HA 5
D1400-1380 138 4.00 - 0.10 130.0 + 0.63 / - 1.50 11.9 11.0 4.0 107.000 134.0 - 0.63 4.15 2.00 HA 5
D1400-1400 140 4.00 - 0.10 133.0 + 0.63 / - 1.50 12.0 11.2 4.0 110.000 136.0 - 0.63 4.15 2.00 HA 5
D1400-1420 142 4.00 - 0.10 135.0 + 0.63 / - 1.50 12.1 11.3 4.0 112.000 138.0 - 0.63 4.15 2.00 HA 5
D1400-1450 145 4.00 - 0.10 138.0 + 0.63 / - 1.50 12.2 11.5 4.0 115.000 141.0 - 0.63 4.15 2.00 HA 5
D1400-1470 147 4.00 - 0.10 140.0 + 0.63 / - 1.50 12.3 11.6 4.0 116.000 143.0 - 0.63 4.15 2.00 HA 5
D1400-1480 148 4.00 - 0.10 140.0 + 0.63 / - 1.50 12.3 11.6 4.0 116.000 144.0 - 0.63 4.15 2.00 HA 5
D1400-1500 150 4.00 - 0.10 142.0 + 0.63 / - 1.50 13.0 11.8 4.0 120.000 145.0 - 0.63 4.15 2.50 HA 5
D1400-1520 152 4.00 - 0.10 143.0 + 0.63 / - 1.50 13.0 11.9 4.0 128.000 147.0 - 0.63 4.15 2.50 HA 5

Whilst care has been taken in the production of this catalogue, Circlips (Australia) Pty Ltd is not liable for actions resulting from any incorrect data.
 CIRCLIPS (AUSTRALIA) PTY LTD Phone: 03 8366 2770 Email: [email protected]
D1400 External Circlips - For Shafts - DIN 471
Data Chart Reference Nominal Circlip Dimensions Groove Dimensions
Number Diameter Thickness Tolerance Unstressed Tolerance Lug (a) Beam (b) Lug Hole (d5) Weight Groove Tolerance Min Groove Radial Depth Pliers
(d1) (s) Diameter (d3) max ≈ min Kg/1,000 Diameter (d2) Width (m) of Groove (t)
D1400-1550 155 4.00 - 0.10 146.0 + 0.63 / - 1.50 13.0 12.0 4.0 135.000 150.0 - 0.63 4.15 2.50 HA 5
D1400-1570 157 4.00 - 0.10 148.0 + 0.63 / - 1.50 13.1 12.0 4.0 140.000 152.0 - 0.63 4.15 2.50 HA 5
D1400-1580 158 4.00 - 0.10 148.0 + 0.63 / - 1.50 13.1 12.0 4.0 140.000 153.0 - 0.63 4.15 2.50 HA 5
D1400-1600 160 4.00 - 0.10 151.0 + 0.63 / - 1.50 13.3 12.2 4.0 150.000 155.0 - 0.63 4.15 2.50 HA 5
D1400-1620 162 4.00 - 0.10 152.5 + 0.63 / - 1.50 13.3 12.3 4.0 155.000 157.0 - 0.63 4.15 2.50 HA 5
D1400-1650 165 4.00 - 0.10 155.5 + 0.63 / - 1.50 13.5 12.5 4.0 160.000 160.0 - 0.63 4.15 2.50 HA 5
D1400-1670 167 4.00 - 0.10 157.5 + 0.63 / - 1.50 13.5 12.9 4.0 163.000 162.0 - 0.63 4.15 2.50 HA 5
D1400-1680 168 4.00 - 0.10 157.5 + 0.63 / - 1.50 13.5 12.9 4.0 163.000 163.0 - 0.63 4.15 2.50 HA 5
D1400-1700 170 4.00 - 0.10 160.5 + 0.63 / - 1.50 13.5 12.9 4.0 170.000 165.0 - 0.63 4.15 2.50 HA 5
D1400-1720 172 4.00 - 0.10 160.5 + 0.63 / - 1.50 13.5 12.9 4.0 170.000 167.0 - 0.63 4.15 2.50 HA 5
D1400-1750 175 4.00 - 0.10 165.5 + 0.63 / - 1.50 13.5 12.9 4.0 180.000 170.0 - 0.63 4.15 2.50 HA 5
Manufacturers Choice D1400-1770 177 4.00 - 0.10 167.5 + 0.63 / - 1.50 14.2 13.5 4.0 183.000 172.0 - 0.63 4.15 2.50 HA 5
D1400-1780 178 4.00 - 0.10 167.5 + 0.63 / - 1.50 14.2 13.5 4.0 183.000 173.0 - 0.63 4.15 2.50 HA 5
D1400-1800 180 4.00 - 0.10 170.5 + 0.63 / - 1.50 14.2 13.5 4.0 190.000 175.0 - 0.63 4.15 2.50 HA 5
D1400-1820 182 4.00 - 0.10 170.5 + 0.63 / - 1.50 14.2 13.5 4.0 190.000 177.0 - 0.63 4.15 2.50 HA 5
D1400-1850 185 4.00 - 0.10 175.5 + 0.63 / - 1.50 14.2 13.5 4.0 200.000 180.0 - 0.63 4.15 2.50 HA 5
D1400-1870 187 4.00 - 0.10 177.5 + 0.63 / - 1.50 14.2 14.0 4.0 203.000 182.0 - 0.72 4.15 2.50 HA 5
D1400-1880 188 4.00 - 0.10 177.5 + 0.63 / - 1.50 14.2 14.0 4.0 203.000 183.0 - 0.72 4.15 2.50 HA 5
D1400-1900 190 4.00 - 0.10 180.5 + 0.72 / - 1.70 14.2 14.0 4.0 210.000 185.0 - 0.72 4.15 2.50 HA 5
D1400-1920 192 4.00 - 0.10 180.5 + 0.72 / - 1.70 14.2 14.0 4.0 210.000 187.0 - 0.72 4.15 2.50 HA 5
Unstressed D1400-1950 195 4.00 - 0.10 185.5 + 0.72 / - 1.70 14.2 14.0 4.0 220.000 190.0 - 0.72 4.15 2.50 HA 5
D1400-1970 197 4.00 - 0.10 187.5 + 0.72 / - 1.70 14.2 14.0 4.0 223.000 192.0 - 0.72 4.15 2.50 HA 5
D1400-1980 198 4.00 - 0.10 187.5 + 0.72 / - 1.70 14.2 14.0 4.0 223.000 193.0 - 0.72 4.15 2.50 HA 5
D1400-2000 200 4.00 - 0.10 190.5 + 0.72 / - 1.70 14.2 14.0 4.0 230.000 195.0 - 0.72 4.15 2.50 HA 5
D1400-2020 202 5.00 - 0.12 193.0 + 0.72 / - 1.70 14.2 14.0 4.0 235.000 196.0 - 0.72 5.15 3.00 HA 5
D1400-2050 205 5.00 - 0.12 193.0 + 0.72 / - 1.70 14.2 14.0 4.0 243.000 199.0 - 0.72 5.15 3.00 HA 5
D1400-2070 207 5.00 - 0.12 193.0 + 0.72 / - 1.70 14.2 14.0 4.0 243.000 201.0 - 0.72 5.15 3.00 HA 5
D1400-2080 208 5.00 - 0.12 193.0 + 0.72 / - 1.70 14.2 14.0 4.0 243.000 202.0 - 0.72 5.15 3.00 HA 5
D1400-2100 210 5.00 - 0.12 198.0 + 0.72 / - 1.70 14.2 14.0 4.0 248.000 204.0 - 0.72 5.15 3.00 HA 5
D1400-2120 212 5.00 - 0.12 198.0 + 0.72 / - 1.70 14.2 14.0 4.0 248.000 206.0 - 0.72 5.15 3.00 HA 5
D1400-2150 215 5.00 - 0.12 203.0 + 0.72 / - 1.70 14.2 14.0 4.0 260.000 209.0 - 0.72 5.15 3.00 HA 5
D1400-2170 217 5.00 - 0.12 203.0 + 0.72 / - 1.70 14.2 14.0 4.0 260.000 211.0 - 0.72 5.15 3.00 HA 5
D1400-2180 218 5.00 - 0.12 203.0 + 0.72 / - 1.70 14.2 14.0 4.0 260.000 212.0 - 0.72 5.15 3.00 HA 5
D1400-2200 220 5.00 - 0.12 208.0 + 0.72 / - 1.70 14.2 14.0 4.0 265.000 214.0 - 0.72 5.15 3.00 HA 5
D1400-2220 222 5.00 - 0.12 208.0 + 0.72 / - 1.70 14.2 14.0 4.0 265.000 216.0 - 0.72 5.15 3.00 HA 5
D1400-2250 225 5.00 - 0.12 213.0 + 0.72 / - 1.70 14.2 14.0 4.0 280.000 219.0 - 0.72 5.15 3.00 HA 5
D1400-2270 227 5.00 - 0.12 213.0 + 0.72 / - 1.70 14.2 14.0 4.0 280.000 221.0 - 0.72 5.15 3.00 HA 5
D1400-2280 228 5.00 - 0.12 213.0 + 0.72 / - 1.70 14.2 14.0 4.0 280.000 222.0 - 0.72 5.15 3.00 HA 5
D1400-2300 230 5.00 - 0.12 218.0 + 0.72 / - 1.70 14.2 14.0 4.0 290.000 224.0 - 0.72 5.15 3.00 HA 5
D1400-2320 232 5.00 - 0.12 218.0 + 0.72 / - 1.70 14.2 14.0 4.0 290.000 226.0 - 0.72 5.15 3.00 HA 5
D1400-2350 235 5.00 - 0.12 223.0 + 0.72 / - 1.70 14.2 14.0 4.0 305.000 229.0 - 0.72 5.15 3.00 HA 5
D1400-2370 237 5.00 - 0.12 223.0 + 0.72 / - 1.70 14.2 14.0 4.0 305.000 231.0 - 0.72 5.15 3.00 HA 5
D1400-2380 238 5.00 - 0.12 223.0 + 0.72 / - 1.70 14.2 14.0 4.0 305.000 232.0 - 0.72 5.15 3.00 HA 5
D1400-2400 240 5.00 - 0.12 228.0 + 0.72 / - 1.70 14.2 14.0 4.0 310.000 234.0 - 0.72 5.15 3.00 HA 5
D1400-2420 242 5.00 - 0.12 228.0 + 0.72 / - 1.70 14.2 14.0 4.0 310.000 236.0 - 0.72 5.15 3.00 HA 5
D1400-2450 245 5.00 - 0.12 233.0 + 0.72 / - 1.70 14.2 14.0 4.0 325.000 239.0 - 0.72 5.15 3.00 HA 5
D1400-2470 247 5.00 - 0.12 233.0 + 0.72 / - 1.70 14.2 14.0 4.0 325.000 241.0 - 0.72 5.15 3.00 HA 5
D1400-2480 248 5.00 - 0.12 233.0 + 0.72 / - 1.70 14.2 14.0 4.0 325.000 242.0 - 0.72 5.15 3.00 HA 5
D1400-2500 250 5.00 - 0.12 238.0 + 0.72 / - 1.70 14.2 14.0 4.0 335.000 244.0 - 0.72 5.15 3.00 HA 5
D1400-2520 252 5.00 - 0.12 238.0 + 0.72 / - 1.70 16.2 16.0 5.0 335.000 244.0 - 0.72 5.15 4.00 MAJ

Whilst care has been taken in the production of this catalogue, Circlips (Australia) Pty Ltd is not liable for actions resulting from any incorrect data.
 CIRCLIPS (AUSTRALIA) PTY LTD Phone: 03 8366 2770 Email: [email protected]
D1400 External Circlips - For Shafts - DIN 471
Data Chart Reference Nominal Circlip Dimensions Groove Dimensions
Number Diameter Thickness Tolerance Unstressed Tolerance Lug (a) Beam (b) Lug Hole (d5) Weight Groove Tolerance Min Groove Radial Depth Pliers
(d1) (s) Diameter (d3) max ≈ min Kg/1,000 Diameter (d2) Width (m) of Groove (t)
D1400-2550 255 5.00 - 0.12 240.0 + 0.72 / - 1.70 16.2 16.0 5.0 348.000 247.0 - 0.72 5.15 4.00 MAJ
D1400-2570 257 5.00 - 0.12 240.0 + 0.72 / - 1.70 16.2 16.0 5.0 348.000 249.0 - 0.72 5.15 4.00 MAJ
D1400-2580 258 5.00 - 0.12 240.0 + 0.72 / - 1.70 16.2 16.0 5.0 348.000 250.0 - 0.72 5.15 4.00 MAJ
D1400-2600 260 5.00 - 0.12 245.0 + 0.72 / - 1.70 16.2 16.0 5.0 355.000 252.0 - 0.81 5.15 4.00 MAJ
D1400-2620 262 5.00 - 0.12 245.0 + 0.72 / - 1.70 16.2 16.0 5.0 355.000 254.0 - 0.81 5.15 4.00 MAJ
D1400-2650 265 5.00 - 0.12 250.0 + 0.72 / - 1.70 16.2 16.0 5.0 370.000 257.0 - 0.81 5.15 4.00 MAJ
D1400-2670 267 5.00 - 0.12 250.0 + 0.72 / - 1.70 16.2 16.0 5.0 370.000 259.0 - 0.81 5.15 4.00 MAJ
D1400-2680 268 5.00 - 0.12 250.0 + 0.72 / - 1.70 16.2 16.0 5.0 370.000 260.0 - 0.81 5.15 4.00 MAJ
D1400-2700 270 5.00 - 0.12 255.0 + 0.81 / - 2.00 16.2 16.0 5.0 375.000 262.0 - 0.81 5.15 4.00 MAJ
D1400-2720 272 5.00 - 0.12 255.0 + 0.81 / - 2.00 16.2 16.0 5.0 375.000 264.0 - 0.81 5.15 4.00 MAJ
D1400-2750 275 5.00 - 0.12 260.0 + 0.81 / - 2.00 16.2 16.0 5.0 390.000 267.0 - 0.81 5.15 4.00 MAJ
Manufacturers Choice D1400-2770 277 5.00 - 0.12 260.0 + 0.81 / - 2.00 16.2 16.0 5.0 390.000 269.0 - 0.81 5.15 4.00 MAJ
D1400-2780 278 5.00 - 0.12 260.0 + 0.81 / - 2.00 16.2 16.0 5.0 390.000 270.0 - 0.81 5.15 4.00 MAJ
D1400-2800 280 5.00 - 0.12 265.0 + 0.81 / - 2.00 16.2 16.0 5.0 398.000 272.0 - 0.81 5.15 4.00 MAJ
D1400-2820 282 5.00 - 0.12 265.0 + 0.81 / - 2.00 16.2 16.0 5.0 398.000 274.0 - 0.81 5.15 4.00 MAJ
D1400-2850 285 5.00 - 0.12 270.0 + 0.81 / - 2.00 16.2 16.0 5.0 410.000 277.0 - 0.81 5.15 4.00 MAJ
D1400-2870 287 5.00 - 0.12 270.0 + 0.81 / - 2.00 16.2 16.0 5.0 410.000 279.0 - 0.81 5.15 4.00 MAJ
D1400-2880 288 5.00 - 0.12 270.0 + 0.81 / - 2.00 16.2 16.0 5.0 410.000 280.0 - 0.81 5.15 4.00 MAJ
D1400-2900 290 5.00 - 0.12 275.0 + 0.81 / - 2.00 16.2 16.0 5.0 418.000 282.0 - 0.81 5.15 4.00 MAJ
D1400-2920 292 5.00 - 0.12 275.0 + 0.81 / - 2.00 16.2 16.0 5.0 418.000 284.0 - 0.81 5.15 4.00 MAJ
Unstressed D1400-2950 295 5.00 - 0.12 280.0 + 0.81 / - 2.00 16.2 16.0 5.0 430.000 287.0 - 0.81 5.15 4.00 MAJ
D1400-2970 297 5.00 - 0.12 280.0 + 0.81 / - 2.00 16.2 16.0 5.0 430.000 289.0 - 0.81 5.15 4.00 MAJ
D1400-2980 298 5.00 - 0.12 280.0 + 0.81 / - 2.00 16.2 16.0 5.0 430.000 290.0 - 0.81 5.15 4.00 MAJ
D1400-3000 300 5.00 - 0.12 285.0 + 0.81 / - 2.00 16.2 16.0 5.0 440.000 292.0 - 0.81 5.15 4.00 MAJ
D1400-3050 305 6.00 - 0.15 288.0 + 0.81 / - 2.00 n/a 20.0 6.0 738.000 295.0 - 0.81 6.20 5.00 MAJ
D1400-3100 310 6.00 - 0.15 293.0 + 0.81 / - 2.00 n/a 20.0 6.0 750.000 300.0 - 0.81 6.20 5.00 SMAJ
D1400-3150 315 6.00 - 0.15 298.0 + 0.81 / - 2.00 n/a 20.0 6.0 760.000 305.0 - 0.81 6.20 5.00 SMAJ
D1400-3200 320 6.00 - 0.15 303.0 + 0.81 / - 2.00 n/a 20.0 6.0 770.000 310.0 - 0.81 6.20 5.00 SMAJ
D1400-3250 325 6.00 - 0.15 308.0 + 0.81 / - 2.00 n/a 20.0 6.0 787.000 315.0 - 0.81 6.20 5.00 SMAJ
D1400-3300 330 6.00 - 0.15 313.0 + 0.81 / - 2.00 n/a 20.0 6.0 800.000 320.0 - 0.89 6.20 5.00 SMAJ
D1400-3350 335 6.00 - 0.15 318.0 + 0.90 / - 2.00 n/a 20.0 6.0 826.000 325.0 - 0.89 6.20 5.00 SMAJ
D1400-3400 340 6.00 - 0.15 323.0 + 0.90 / - 2.00 n/a 20.0 6.0 840.000 330.0 - 0.89 6.20 5.00 SMAJ
D1400-3450 345 6.00 - 0.15 328.0 + 0.90 / - 2.00 n/a 20.0 6.0 845.000 335.0 - 0.89 6.20 5.00 SMAJ
D1400-3500 350 6.00 - 0.15 333.0 + 0.90 / - 2.00 n/a 20.0 6.0 850.000 340.0 - 0.89 6.20 5.00 SMAJ
D1400-3550 355 6.00 - 0.15 338.0 + 0.90 / - 2.00 n/a 20.0 6.0 865.000 345.0 - 0.89 6.20 5.00 SMAJ
D1400-3600 360 6.00 - 0.15 343.0 + 0.90 / - 2.00 n/a 20.0 6.0 880.000 350.0 - 0.89 6.20 5.00 SMAJ
D1400-3650 365 6.00 - 0.15 348.0 + 0.90 / - 2.00 n/a 20.0 6.0 885.000 355.0 - 0.89 6.20 5.00 SMAJ
D1400-3700 370 6.00 - 0.15 353.0 + 0.90 / - 2.00 n/a 20.0 6.0 890.000 360.0 - 0.89 6.20 5.00 SMAJ
D1400-3750 375 6.00 - 0.15 358.0 + 0.90 / - 2.00 n/a 20.0 6.0 910.000 365.0 - 0.89 6.20 5.00 SMAJ
D1400-3800 380 6.00 - 0.15 363.0 + 0.90 / - 2.00 n/a 20.0 6.0 930.000 370.0 - 0.89 6.20 5.00 SMAJ
D1400-3850 385 6.00 - 0.15 368.0 + 0.90 / - 2.00 n/a 20.0 6.0 940.000 375.0 - 0.89 6.20 5.00 SMAJ
D1400-3900 390 6.00 - 0.15 373.0 + 0.90 / - 2.00 n/a 20.0 6.0 950.000 380.0 - 0.89 6.20 5.00 SMAJ
D1400-3950 395 6.00 - 0.15 378.0 + 0.90 / - 2.00 n/a 20.0 6.0 990.000 385.0 - 0.89 6.20 5.00 SMAJ
D1400-4000 400 6.00 - 0.15 383.0 + 0.90 / - 2.00 n/a 20.0 6.0 1,040.000 390.0 - 0.89 6.20 5.00 SMAJ
D1400-4100 410 7.00 - 0.15 390.0 + 0.90 / - 2.00 n/a 26.0 6.0 1,320.000 398.0 - 0.89 7.20 6.00 SMAJ
D1400-4200 420 7.00 - 0.15 400.0 + 0.90 / - 2.00 n/a 26.0 6.0 1,360.000 408.0 - 1.00 7.20 6.00 SMAJ
D1400-4300 430 7.00 - 0.15 410.0 + 1.00 / - 2.00 n/a 26.0 6.0 1,390.000 418.0 - 1.00 7.20 6.00 SMAJ
D1400-4400 440 7.00 - 0.15 420.0 + 1.00 / - 2.00 n/a 26.0 6.0 1,420.000 428.0 - 1.00 7.20 6.00 SMAJ
D1400-4500 450 7.00 - 0.15 430.0 + 1.00 / - 2.00 n/a 26.0 6.0 1,450.000 438.0 - 1.00 7.20 6.00 SMAJ
D1400-4600 460 7.00 - 0.15 440.0 + 1.00 / - 2.00 n/a 26.0 6.0 1,520.000 448.0 - 1.00 7.20 6.00 SMAJ

Whilst care has been taken in the production of this catalogue, Circlips (Australia) Pty Ltd is not liable for actions resulting from any incorrect data.
 CIRCLIPS (AUSTRALIA) PTY LTD Phone: 03 8366 2770 Email: [email protected]
D1400 External Circlips - For Shafts - DIN 471
Data Chart Reference Nominal Circlip Dimensions Groove Dimensions
Number Diameter Thickness Tolerance Unstressed Tolerance Lug (a) Beam (b) Lug Hole (d5) Weight Groove Tolerance Min Groove Radial Depth Pliers
(d1) (s) Diameter (d3) max ≈ min Kg/1,000 Diameter (d2) Width (m) of Groove (t)
D1400-4700 470 7.00 - 0.15 450.0 + 1.00 / - 2.00 n/a 26.0 6.0 1,590.000 458.0 - 1.00 7.20 6.00 SMAJ
D1400-4800 480 7.00 - 0.15 460.0 + 1.00 / - 2.00 n/a 26.0 6.0 1,660.000 468.0 - 1.00 7.20 6.00 SMAJ
D1400-4900 490 7.00 - 0.15 470.0 + 1.00 / - 2.00 n/a 26.0 6.0 1,725.000 478.0 - 1.00 7.20 6.00 SMAJ
D1400-5000 500 7.00 - 0.15 480.0 + 1.00 / - 2.00 n/a 26.0 6.0 1,790.000 488.0 - 1.00 7.20 6.00 SMAJ
D1400-5100 510 8.00 - 0.15 485.0 + 1.00 / - 2.00 n/a 26.0 6.0 2,300.000 496.0 - 1.00 8.20 7.00 SMAJ
D1400-5200 520 8.00 - 0.15 495.0 + 1.00 / - 2.00 n/a 26.0 6.0 2,350.000 506.0 - 1.00 8.20 7.00 SMAJ
D1400-5300 530 8.00 - 0.15 505.0 + 1.50 / - 3.00 n/a 26.0 6.0 2,400.000 516.0 - 1.00 8.20 7.00 SMAJ
D1400-5400 540 8.00 - 0.15 515.0 + 1.50 / - 3.00 n/a 26.0 6.0 2,445.000 526.0 - 1.00 8.20 7.00 SMAJ
D1400-5500 550 8.00 - 0.15 525.0 + 1.50 / - 3.00 n/a 26.0 6.0 2,490.000 536.0 - 1.00 8.20 7.00 SMAJ
D1400-5600 560 8.00 - 0.15 535.0 + 1.50 / - 3.00 n/a 26.0 6.0 2,580.000 546.0 - 1.00 8.20 7.00 SMAJ
D1400-5700 570 8.00 - 0.15 545.0 + 1.50 / - 3.00 n/a 26.0 6.0 2,670.000 556.0 - 1.00 8.20 7.00 SMAJ
Manufacturers Choice D1400-5800 580 8.00 - 0.15 555.0 + 1.50 / - 3.00 n/a 26.0 6.0 2,760.000 566.0 - 1.00 8.20 7.00 SMAJ
D1400-5900 590 8.00 - 0.15 565.0 + 1.50 / - 3.00 n/a 26.0 6.0 2,840.000 576.0 - 1.00 8.20 7.00 SMAJ
D1400-6000 600 8.00 - 0.15 575.0 + 1.50 / - 3.00 n/a 26.0 6.0 2,920.000 586.0 - 1.00 8.20 7.00 SMAJ
D1400-6500 650 9.00 -0.20 620.0 + 1.50 / - 3.00 n/a 34.0 6.0 3,770.000 634.0 - 1.00 9.30 8.00 SMAJ
D1400-7000 700 9.00 -0.20 670.0 + 1.50 / - 3.00 n/a 34.0 6.0 4,070.000 684.0 - 1.00 9.30 8.00 SMAJ
D1400-7500 750 9.00 -0.20 715.0 + 1.50 / - 3.00 n/a 34.0 9.0 4,640.000 732.0 - 1.00 9.30 9.00 SMAJ
D1400-8000 800 9.00 -0.20 765.0 + 1.50 / - 3.00 n/a 34.0 9.0 5,330.000 782.0 - 1.00 9.30 9.00 SMAJ
D1400-8500 850 9.00 -0.20 810.0 + 2.00 / - 4.00 n/a 34.0 9.0 6,030.000 830.0 - 1.00 9.30 10.00 SMAJ
Unstressed D1400-9000 900 9.00 -0.20 860.0 + 2.00 / - 4.00 n/a 34.0 9.0 6,640.000 880.0 - 1.00 9.30 10.00 SMAJ
Unstressed D1400-9500 950 9.00 -0.20 900.0 + 2.00 / - 4.00 n/a 34.0 9.0 7,260.000 928.0 - 1.00 9.30 11.00 SMAJ
- 1000 9.00 -0.20 950.0 + 2.00 / - 4.00 n/a 34.0 9.0 8,130.000 978.0 - 1.00 9.30 11.00 SMAJ

** Rings in excess of 650mm nominal diameter are manufactured as concentric circlips.

Whilst care has been taken in the production of this catalogue, Circlips (Australia) Pty Ltd is not liable for actions resulting from any incorrect data.