7880IP-ASI-IP

ASI/SDI IP Encapsulator

The 7880IP-ASI-IP is a complete hardware based solution to transform ASI to IP, IP

to ASI. Module can also pass SD SDI over IP via Dual GigE interface. The 7880IP-
ASI-IP can also regenerate IP from IP input with different settings and add FEC. As
more providers are trying to deliver contribution and distribution quality video over IP
networks, the 7880IP-ASI-IP is capable of bridging traditional compressed world (ASI)
with the standard IP networks.

Controlled by the industry leading VistaLINK® PRO, the 7880IP-ASI-IP offers signal
providers the capability to encapsulate MPEG-2 transport stream payload to a uni-
cast or multicast standardized IP stream. The 7880IP-ASI-IP is also capable of re-
ceiving IP stream and re-create ASI stream. For contribution application, the
7880IP-ASI-IP offers industry standard FEC support for encapsulation or de-encap-
sulation.

The 7880IP-ASI-IP occupies one card slot and can be housed in a 1RU frame which
will hold up to 3 modules, a 3RU frame which will hold up to 15 modules or a
standalone enclosure.

Features & Benefits

• Fully integrated with the Industry leading Evertz VistaLINK® PRO NMS system • IP to IP conversion
• 2 Independent IP Ports, 1 input and 1 ASI/SDI output • FEC encoding and decoding- Pro MPEG forum code of practice #3- release
• ASI/SDI to IP conversion 2<cop3>
• IP to ASI/SDI conversion • Built-in RJ-45 control or via frame controller

7880IP-ASI-IP

DATA IP

LN/ACT

PORT 1
FEC Ethernet 1

LN/ACT 1000
TS processor
ASI/SDI Equalizer Generator Mac adr. 1 10/100/1000
IP RJ45
Input Output processor IP stack 1
encapsulators

PORT 2
1000
ASI/SDI

10/100 LN/ACT
loop out Ethernet 2

CONTROL
IP router
Output Mac adr. 2 10/100/1000
RJ45
IP stack 2

ASI IN
TS processor FEC
Cable IP De- Receptor
ASI/SDI
Output Driver encapsulators Input processor

LOOP OUT
10/100 RJ45
CPU ASI OUT

Controller

VistaLINK® control
Card Module Input
Edge Status Present

Specifications
Inputs and outputs: • Optional FEC encoding (Pro MPEG forum code of Monitored parameters:
• 1xASI/SDI input per DVB TR 10I 891/SMPTE 259 practice #3- release 2<cop3>) with L&D following the • Total Bitrate
• 1xASI/SDIoutput per DVB TR 10I 891/SMPTE 259 following range: • Null Packet Bitrate
• Min ASI TS input bitrate 100kb/s L*D ≤100 • TS_sync_loss
• Max ASI TS input bitrate 213Mb/s 1 ≤ L ≤ 20 • Continuity count error
• 2xRJ45 10/100/1000 GigaE I/O for MPEG over IP 4 ≤ D ≤20 • PID List
• 1xRJ45 10/100 control port • IP address (IP, Subnet mask, Gateway) for the source
• IP address for the destination (Unicast and Multicast) Electrical:
Encapsulation parameters: • Selection of the source port and destination port Voltage: +12V DC
• IP encapsulation for ASI input: • Set Local MAC address of the equipment Power: 11 W
MAC 802.3>IPV4>RTP>UDP>MPEG (RTP can be EMI/RFI: Complies with FCC Part 15, Class A
turned on and off) De-Encapsulation Parameters: EU EMC Directive
Select 1 to 7 MPEG packets per IP frame • Join Multicast by providing correct messaging using IGMP
• Selection of the UDP Ports Physical (number of slots):
• Auto fail-over to redundant multicast address 350FR: 1
7700FR-C: 1
7800FR: 1

Ordering Information
7880IP-ASI--IP ASI/SDI IP Encapsulator Enclosures
350FR 3RU Portable Multiframe which holds up to 7 single slot modules
Ordering Options Rear Plate must be specified at time of order 7700FR-C 3RU Multiframe which holds up to 15 single slot modules
Eg. Model +3RU 7800FR 3RU Multiframe which holds up to 15 single slot modules
7801FR 1RU Multiframe which holds up to 4 single or 2 dual slot modules
7701FR 1RU Multiframe which holds up to 3 single or dual slot modules
Rear Plate Suffix S7701FR Standalone enclosure
+3RU 3RU Rear Plate for use with 350FR, 7700FR-C or 7800FR Multiframe
+1RU 1RU Rear Plate for use with 7701FR Multiframe
+SA Standalone Enclosure

www.evertz.com