Symposium Paper: Improved Methods For Estimation of Coal in Situ Density and Moisture (Report On Acarp Project C10042)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

SYMPOSIUM PAPER

IMPROVED METHODS FOR ESTIMATION OF


COAL IN SITU DENSITY AND MOISTURE
[REPORT ON ACARP PROJECT C10042]
A.D. Meyers(1), C. Clarkson(2), T. Wex(1) and K.R. Leach(1)
(1)
A&B Mylec Pty Ltd and (2) C. Clarkson and Associates

ABSTRACT

The lack of a precise method for the measurement of in situ density is one of a number of
factors that cause errors when estimating coal resources and reserves, and performing site
tonnage and quality reconciliations. The ability to accurately quantify the tonnes of product
coal at a specified quality from a particular area of the resource is of vital importance to the
financial viability of any new operation attempting to develop marginal deposits.

This paper details the outcomes from the recently completed ACARP Project C10042,
“Estimation of Insitu Density”. The project sought to determine a viable empirical measure
of in situ density and then develop a model for its estimation utilising a suite of chemical
analyses that quantified the key porosity, rank and moisture characteristics. The in situ
density measurement procedure utilised the coal application of the Australian Standard for
the field measurement of soil density, AS1289.5.3.2-1993. Using this technique seven mines
were visited (5 QLD / 2 NSW) to generate over 50 data sets. The specific goal of obtaining a
wide range of coal types for the project data evaluation and model development was
successfully achieved with sample rank (as Rvmax) ranging from 0.43 to 2.53. The complete
ACARP project report, no. C10042, “Estimation of in situ density from apparent relative
density and relative density analyses” (Meyers, et al, 2003) should be read in conjunction
with this paper to fully appreciate the data generation, evaluation and modelling processes.

Using non-linear multivariable analysis, ash, volatile matter and ultimate carbon content were
shown to generate an excellent correlation with the measured insitu density. Subsequently, a
model was developed for the estimation of insitu density achieving a model accuracy of +/-
0.014RD units at a 95% confidence limit (CL). To supplement this model of in situ density,
the same data set was used to generate a model for in situ moisture, leading to the successful
development of a suitable model with an accuracy of +/-1.4% moisture units at a 95% CL.

Reference :
Meyers, A., Clarkson, C., Wex, T., & Leach, K. (2003). Improved Methods for Estimation of
Coal in Situ Density and Moisture. Advances in the Study of the Sydney Basin; Symposium.
Wollongong: University of Wollongong.

You might also like