Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Bulacan Agricultural State College: Rating

    Uploaded by

    Jermyn G Evangelista
    This document provides instructions for a Packet Tracer subnetting scenario. Students are asked to design an IP addressing scheme for a network topology with 4 subnets needing at least 25 addresses each. They must subnet the 192.168.100.0/24 network and assign IP addresses to routers and switches accordingly. The objectives are to design the IP addressing scheme and verify connectivity between network devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Bulacan Agricultural State College: Rating

    Uploaded by

    Jermyn G Evangelista
    43 views3 pages
    This document provides instructions for a Packet Tracer subnetting scenario. Students are asked to design an IP addressing scheme for a network topology with 4 subnets needing at least 25 addresses each. They must subnet the 192.168.100.0/24 network and assign IP addresses to routers and switches accordingly. The objectives are to design the IP addressing scheme and verify connectivity between network devices.

    Original Title

    LABORATORY ACTIVITY NO 3

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for a Packet Tracer subnetting scenario. Students are asked to design an IP addressing scheme for a network topology with 4 subnets needing at least 25 addresses each. They must subnet the 192.168.100.0/24 network and assign IP addresses to routers and switches accordingly. The objectives are to design the IP addressing scheme and verify connectivity between network devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    43 views3 pages

    Bulacan Agricultural State College: Rating

    Uploaded by

    Jermyn G Evangelista
    This document provides instructions for a Packet Tracer subnetting scenario. Students are asked to design an IP addressing scheme for a network topology with 4 subnets needing at least 25 addresses each. They must subnet the 192.168.100.0/24 network and assign IP addresses to routers and switches accordingly. The objectives are to design the IP addressing scheme and verify connectivity between network devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 3

    [Type here]

    Republic of the Philippines


    BULACAN AGRICULTURAL STATE COLLEGE
    Institute of Engineering and Applied Technology
    Pinaod, San Ildefonso, Bulacan, Philippines 3010
    First Semester 2019-2020
    NETWORKING (IT203)
    Laboratory Activity Number (Subnetting)

    Course No./Section: Date : Rating

    Name:

    Packet Tracer Subnetting Scenario


    Device Interface IP Address Subnet Mask Default
    Gateway
    R1 G0/0
    G0/1
    S0/0/0
    R2 G0/0
    G0/1
    S0/0/0
    S1 VLAN 1
    S2 VLAN 1
    S3 VLAN 1
    S4 VLAN 1
    PC1 NIC
    PC2 NIC
    PC3 NIC
    PC4 NIC

    OBJECTIVES:

    Part 1: Design an IP Addressing Scheme


    Part 2: Assign IP Addresses to Network Devices and Verify Connectivity

    Scenario
    In this activity, you are given the network address of 192.168.100.0/24 to subnet and
    provided the IP addressing for the network shown in the topology. Each LAN in the
    network requires enough space for at least 25 address for end devices, the switch and
    the router, The connection between R1 to R2 which require an IP address for each of
    the link.

    Part 1 Design and IP Addressing Scheme


    Step 1: Subnet the 192.168.100.0/ network into the appropriate number of subnets
    a. Based on the topology, how many subnets are needed?
    b. How many bits must be borrowed to support the number of subnets in the topology
    table?
    c. How many subnets does this create?
    d. How many usable hosts does th
    is create per subnet?
    Note: If you answer is less than 25 hosts required, then you borrowed too many bits.
    e. Calculate the binary value for the first five subnets. The first subnets is already shown

    Net 0: 192.168.100.0 0 0 0 0 0 0 0
    Net 1: 192.168.100. _ _ _ _ _ _ _ _

    Net 2: 192.168.100. _ _ _ _ _ _ _ _

    Net 3: 192.168.100. _ _ _ _ _ _ _ _

    Net 4: 192.168.100. _ _ _ _ _ _ _ _

    f. Fill the Subnet Table, Listing the decimal value of all available subnets, the first and
    last usable host address and the broadcast address,. Repeat until all addresses are
    listed.

    Note: you may not need to use all rows.

    Subnet Table

    Subnet Subnet First Usable Last Usable Broadcast


    Number Address Host Address Host Address Address
    0
    1
    2
    3
    4
    5
    6
    7
    8
    9

    Instruction: Configure a simple network CISCO Router and Switch topology.


    using packet tracer (this is an application which can be used even for offline)

    You might also like