Scribd
Upload
65 views

Assignment-1: Civil Engineering Department UCE&T, IUB

This document contains an assignment for a basic electrical engineering course, with 12 questions related to electrical circuit analysis. The assignment covers calculating power delivered to circuit elements from given charge and voltage values, identifying branches and nodes in circuits, finding voltages and currents in various circuits containing resistors and controlled sources, and calculating equivalent resistances in parallel and series circuits.

Uploaded by

Muhammad Shoaib Rabbani
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
65 views

Assignment-1: Civil Engineering Department UCE&T, IUB

This document contains an assignment for a basic electrical engineering course, with 12 questions related to electrical circuit analysis. The assignment covers calculating power delivered to circuit elements from given charge and voltage values, identifying branches and nodes in circuits, finding voltages and currents in various circuits containing resistors and controlled sources, and calculating equivalent resistances in parallel and series circuits.

Uploaded by

Muhammad Shoaib Rabbani
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Basic Electrical Engineering (ELEN-03104)

Civil Engineering Department UCE&T, IUB

Assignment-1
CLO-I (60)

Q:1
The charge entering the positive terminal of an element is

while the voltage across the element (plus to minus) is

(a) Find the power delivered to the element at t = 0.3 s


(b) Calculate the energy delivered to the element between 0 and 0.6s.

Q:2

Q:3

Q:4
Basic Electrical Engineering (ELEN-03104)

Civil Engineering Department UCE&T, IUB

Q:5

Q:6

Q:7
Show number of branches and nodes in the given circuit

Q:8

Q:9

Show v and i x in the given circuit.

Q:10
Basic Electrical Engineering (ELEN-03104)

Civil Engineering Department UCE&T, IUB


Show V 0 in the circuit and the power dissipated by the controlled source.

Q:11

Show I and V 0 in the given circuit.

Q:12

Show Req and i 0 in the given circuit

You might also like