Scribd
Upload
313 views2 pages

KK Spun India Limited: Municipal Corporation Katni Egis

This document belongs to Unique Consultants and should not be shared without permission. It details calculations for sizing a 33/0.433 kV transformer for a 7.5 MLD sewage treatment plant project in Katni. The transformer capacity required is 387.44 kVA based on steady state conditions and 514.31 kVA based on transient conditions starting of the largest motor. A 500 kVA transformer is selected which meets both steady state and transient loading requirements.

Uploaded by

Pankaj Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
313 views2 pages

KK Spun India Limited: Municipal Corporation Katni Egis

This document belongs to Unique Consultants and should not be shared without permission. It details calculations for sizing a 33/0.433 kV transformer for a 7.5 MLD sewage treatment plant project in Katni. The transformer capacity required is 387.44 kVA based on steady state conditions and 514.31 kVA based on transient conditions starting of the largest motor. A 500 kVA transformer is selected which meets both steady state and transient loading requirements.

Uploaded by

Pankaj Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

This document is the property of Unique Consultants and must not be passed on to any third person or firm not

authorised by us, nor be copied/made use of in full or part by such person or firm without our

DATE REV. NO. DESCRIPTION Designed Checked Approved


REVISIONS

CLIENT : CONSULTANT :

Municipal Corporation Katni Egis


prior permission writing

Contractor: KK Spun India Limited

PROJECT: 7.5 MLD Seawage Treatment Plant at Katni


JOB No.
TOTAL NO. OF PAGES 3 TITLE :
NAME SIGN DATE
DSGN

CHKD
33/0.433 KV TRANSFORMER SIZING CALCULATIONS
APPD
Contractor's Consultants CODE REV.
DOCUMENT No. KKSIL/KATNI/STP-7.5/3A/E/-02 R0
Unique Consultants

RELEASED FOR P PRELIMINARY TENDER INFORMATION APPROVAL CONSTRUCTION


: DOCUMENT NO REV DATE
PROJECT 7.5 MLD STP at Katni
R0 19/10/2018

: 33/0.433 kV TRANSFORMER SIZING PREPARED CHECKED APPROVED SHEET


TITLE
CALCULATION

AD AB AB

A Design Data

1 System Voltage (V) = 0.415 kV


2 Total Connected load (TCL)* = 671.30 kW
3 Total demand in KW (TD)* = 387.15 kW
4 Total Maximum demand (MD)* = 348.7 kVA
5 Design Margin (DM) = 10%
6 Details of Largest motor
a) Equipment No =
b) Description = Air Blower
c) Power Rating (P) = 55.00 kW
d) Power factor (pf) = 0.81
e) Efficiency (h) = 0.82
f) Type of Starter = Soft Starter

B Checking the Capacity for Steady state Conditions

Transformer capacity Required = MD/(1-DM) = 387.44 kVA --(1)


Transformer Capacity Selected = 500 kVA --(2)

C Checking the Capacity for Transient Conditions

Steady state KVA of largest motor (SSLM) = P/(pf.h) = 82.81 kVA

Base load (BL) = MD-SSLM = 265.89 kVA

Starting Current of motor (Ist)= 3* P/(√3 .V.pf.h) = 345.60 A

Starting KVA of motor (STLM) = √3 .V.Ist = 248.42 kVA

Total starting KVA required =STLM +BL = 514.31 kVA --(3)

The Transformer is capable of withstanding 150% =


overloading for 15 seconds, So
Over load withstand capacity of the Transformer = 750 kVA --(4)
(as per IEC )

The Value of Eqn. 2 should be greater than 1 for steady state conditions
and value of Eqn. 4 should be greater than 3 for transient conditions, then
Transformer size selected is in order.

D Result

Transformer size Selected 500 kVA

* Reference Documents
1) Load list

You might also like