Scribd Logo
Upload

Welcome to Scribd!

  • 97 views

    Closed-Loop Frequency Response - Control Systems Questions and Answers

    Uploaded by

    Marwan Mohamed
    This document provides a set of 10 multiple choice questions and answers about closed-loop frequency response in control systems. Closed-loop frequency response is useful as it enables the use of correlations between frequency and transient responses, allows converting time domain specifications to frequency domain after design, and approximately predicts the time response of systems. Important figures of merit in the frequency domain include the maximum value of the resonance peak and the frequency at which it occurs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Closed-Loop Frequency Response - Control Systems Questions and Answers

    Uploaded by

    Marwan Mohamed
    97 views4 pages
    This document provides a set of 10 multiple choice questions and answers about closed-loop frequency response in control systems. Closed-loop frequency response is useful as it enables the use of correlations between frequency and transient responses, allows converting time domain specifications to frequency domain after design, and approximately predicts the time response of systems. Important figures of merit in the frequency domain include the maximum value of the resonance peak and the frequency at which it occurs.

    Original Title

    اسئلة واجوبة اختيارات 3

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a set of 10 multiple choice questions and answers about closed-loop frequency response in control systems. Closed-loop frequency response is useful as it enables the use of correlations between frequency and transient responses, allows converting time domain specifications to frequency domain after design, and approximately predicts the time response of systems. Important figures of merit in the frequency domain include the maximum value of the resonance peak and the frequency at which it occurs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    97 views4 pages

    Closed-Loop Frequency Response - Control Systems Questions and Answers

    Uploaded by

    Marwan Mohamed
    This document provides a set of 10 multiple choice questions and answers about closed-loop frequency response in control systems. Closed-loop frequency response is useful as it enables the use of correlations between frequency and transient responses, allows converting time domain specifications to frequency domain after design, and approximately predicts the time response of systems. Important figures of merit in the frequency domain include the maximum value of the resonance peak and the frequency at which it occurs.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Closed-Loop Frequency Response - Control

    Systems Questions and Answers


    www.sanfoundry.com

    Control Systems Questions and Answers – Closed-Loop


    Frequency Response

    This set of Control Systems Multiple Choice Questions & Answers (MCQs)
    focuses on “Closed-Loop Frequency Response”.

    1. Closed loop frequency response is very useful as :


    a) It approximately predicts the time response of the systems
    b) Time response are converted into time domain speci cations
    c) After design time domain speci cation is converted into frequency
    domain
    d) All of the mentioned
    View Answer

    Answer: d
    Explanation: Closed loop frequency response is very useful as it enables
    to use second order correlations between frequency and transient
    response.

    2. Maximum peak overshoot in time domain corresponds to :


    a) Resonance peak
    b) Resonant frequency
    c) Bandwidth
    d) Cut-off rate
    View Answer

    Answer: a
    Explanation: Resonance peak in frequency domain correspond to
    maximum peak overshoot in time domain.
    3. Frequency of oscillation in time domain correspond to :
    a) Resonance peak
    b) Resonant frequency
    c) Bandwidth
    d) Cut-off rate
    View Answer

    Answer: b
    Explanation: Resonant frequency in frequency domain correspond to
    frequency of oscillation in time domain.

    4. Bandwidth is :
    a) Range of frequencies for which the system gain is more than-3dB
    b) This is considered good range for transmission of signals
    c) For better communication bandwidth of signal must be less
    d) All of the mentioned
    View Answer

    Answer: d
    Explanation: Bandwidth of a signal must be less but channel must be
    more foe better transmission or communication.

    5. Cut-off rate is the ability of the system to distinguish the signal from
    _____________
    a) Bandwidth
    b) Noise
    c) Resonance peak
    d) Magnitude
    View Answer

    Answer: b
    Explanation: Cut-off rate is the ability of the system to distinguish the
    signal from noise.
    6. The important gures of merit to the system in frequency domain are :
    a) Maximum value of resonant peak
    b) Value of resonance frequency
    c) Maximum value of resonant peak and Value of resonance frequency
    d) Minimum value of resonance frequency
    View Answer

    Answer: c
    Explanation: The important gures of merit to the system in frequency
    domain are maximum value of resonance peak and frequency at which it
    occurs.

    7. In q(s) plane Nyquist plot is symmetrical about the :


    a) Imaginary axis
    b) Real axis
    c) Origin
    d) None of the mentioned
    View Answer

    Answer: b
    Explanation: By de nition, In q(s) plane Nyquist plot is symmetrical about
    the real axis.

    8. A polar plot intersects the unit circle at a point making -45° to the
    negative real axis then the phase margin of the system is :
    a) -45°
    b) 45°
    c) 180°-45°
    d) 180°+45°
    View Answer

    Answer: b
    Explanation: As the angle is with the negative real axis hence the Phase
    margin will be 45°.
    9. The parameter which is constant along the constant N circle :
    a) Frequency
    b) Phase angle
    c) Magnitude
    d) Open loop gain
    View Answer

    Answer: b
    Explanation: Phase angle remains constant in constant N-circle.

    10. In second order system gain margin is :


    a) Zero value
    b) Finite value
    c) In nite value
    d) None of the mentioned
    View Answer

    Answer: c
    Explanation: Gain margin is de ned generally for systems with order
    greater than 3.

    Sanfoundry Global Education & Learning Series – Control Systems.


    To practice all areas of Control Systems, here is complete set of 1000+
    Multiple Choice Questions and Answers.

    You might also like