Scribd
Upload
86 views1 page

SB3

This document summarizes the design details of Beam B92, which is part of a 12th story composite beam with a length of 10.9 m. The beam has 39.6 m2 of tributary area and is located at X=50.8667 m, Y=27.25 m. It is composed of a UB457X152X60 steel section with a composite deck having 34 number 19 mm diameter studs. Strength and serviceability checks were performed for various load combinations and the beam was found to pass all checks.

Uploaded by

abhijitkolhe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
86 views1 page

SB3

This document summarizes the design details of Beam B92, which is part of a 12th story composite beam with a length of 10.9 m. The beam has 39.6 m2 of tributary area and is located at X=50.8667 m, Y=27.25 m. It is composed of a UB457X152X60 steel section with a composite deck having 34 number 19 mm diameter studs. Strength and serviceability checks were performed for various load combinations and the beam was found to pass all checks.

Uploaded by

abhijitkolhe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ETABS 18.0.

2 BS 5950-1990 Composite Beam Details License #*1TLRQL5W925PWDV

Story: 12th-O&R Beam B92 Length: 10.9 m Trib. Area: 39.6 m²

Location: X= 50.8667 m Y= 27.25 m 34 19 mm Ø studs

E350 (SB3) UB457X152X60 Shored35 mm Camber

Composite Deck Properties

Deck Cover wc f cu Ribs b eff Q p (kN)


αe αl αs
(mm) (kN/m³) (MPa) (mm) 2/rib

At Left, at Right TR60+1-150mm 90 24.9926 30 ⊥ 1362.5 0 0 0 80

Loading (1.25DL+1.5LL combo)

Constr. Dead SDL Live Red. LLRF Factored


Line Load (kN/m) 0 m→10.9 m 0.000 11.682 11.990 14.533 100 % 51.390

End Reactions

Constr. Dead SDL Live Red. LLRF Combo Factored


I end, J end (kN) 0.0000 63.6669 65.3455 79.2067 100 % 1.25DL+1.5LL 280.0756

Strength Checks

Combo Factored Design Ratio Pass


Shear at Ends (kN) 1.25DL+1.5LL 280.0756 728.0280 0.385 ✓
Partial Comp. Bending (kN-m) 1.25DL+1.5LL 763.2060 900.3905 0.848 ✓

Constructability and Serviceability Checks

Actual Allowable Ratio Pass


Shear Studs Distribution 34 64 0.531 ✓
Dead Load Defl. (mm) 19.1 No Limit N/A N/A
SDL + LL Defl. (mm) 43.3 45.4 0.953 ✓
Live Load Defl. (mm) 23.7 30.3 0.784 ✓
Total Defl. - Camber (mm) 27.4 45.4 0.603 ✓

Section Properties

Y1 Y2 Area S bot I Mc R s R c or R q
(mm) (mm) (cm²) (cm³) (cm⁴) (kN-m) (kN)
Steel fully braced 227.3 N/A 75.3 1104.3 25099.6 N/A 2636.9
Full composite (plastic) 0 114.2 N/A N/A N/A 900.3905 2636.9
Full composite (elastic) N/A 0.4 239.3 1828.8 0.75 * 83208.4 N/A N/A
Partial composite (51%) 0 114.2 N/A 0 0.75 * 53320.4 900.3905 17 * 80 = 1360
Vibrations Check (E c = 36971) 66.5 N/A 651 N/A 102550.6 N/A N/A

C110 -SKP -Tower 1


Page 1 of 1 18-Jun-20
R36-ULTIMATE-06-08-2019.EDB

You might also like