WPP-S

CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER
(SYNCHRONOUS SERIAL OUTPUT)

Main characteristics
• Optimised mechanical structure
• Strokes from 50 to 2500 mm
• Fast installation by mean of steel brackets
• Sliding or floating magnetic cursor
• Synchronous Serial Interface direct to controllers
• Output data resolution available from 20 to 40 μm
• Data format: binary or Gray code; incremental/
decremental
• Power supply 10...32 Vdc
• Resistance to vibration (DIN IEC68T2/6 12g)
• IP67 protection
• Work temperature: -30...+90°C
• Electromagnetic compatibility EMC 2014/30/EU
• Compliant to the directive RoHS 2011/65/EU

Contactless linear position transducer with HYPERWAVE High accuracy of the mesurement with reference to the non
magnetostrictive technology, with RS422-SSI digital output linearity, repeatability and hysteresis. High resistance to
interface. vibrations, mechanical shocks for use in a harsh industrial
The absence of electrical contact on the cursor eliminates all wear environment.
and guarantees almost unlimited life.
High performance in terms of environmental IP protection and
EMC immunity.

TECHNICAL DATA MECHANICAL DIMENSIONS
Model from 50 to 2500 mm
Measurement taken displacement
Position read sampling time
1 ms
(typical)

16
8
Shock test DIN IEC68T2-27 100g - 11ms - single shock
Vibrazioni DIN IEC68T2-6 12g / 10...2000Hz 4
Velocità di spostamento ≤10 m/s A

A
Max. acceleration ≤ 100 m/s2 displacement
Output data resolution available 20, 40 μm
Sliding cursor 32
Cursor (see note)
Floating separate cursor
Working temperature -30...+90°C
13

Storage temperature -40...+100°C

Coefficient of temperature 20 ppm FS / °C
Protection IP67

Note 1) For stroke > 2500mt use sliding or floating cursors with
96

max. distance of 4mm
Closing force
< 1.1 Nm

ELECTRICAL DATA
Synchronous Serial (SSI);
Output signal Binary/Gray;
Incremental/Decremental
A

Data length 24 - 25 bit

C.E. = Model

Nominal power supply 10...32 Vdc

Max. power ripple 1Vpp
Max. input 50mA
Output load RS422/485 standard
500V (*)
Electrical isolation
(D.C. supply/earth)
Protection against polarity
Yes
inversion
58

Protection against overvoltage Yes

Self-resetting internal fuse Yes

(*) it includes a 50V 2J voltage suppressor

ELECTRICAL / MECHANICAL DATA
Model 50 75 100 130 150 175 200 225 300 250 350 360 400 450 500 550 600 650 700 750 800 850 900 950 1000 1100 1200 1250 1300 1400 1500

1750 2000 2250 2500

Electrical
mm Model
stroke (E.S.)
Typical : ≤ ± 0,02 %FS (min ± 0,060 mm) with sliding cursor
Independent ±
Typical : ≤ ± 0.02% FS with floating cursor (value depending on the distance between the cursor and the sen-
linearity %F.S.
sor body)
Max. 
dimensions mm Model + 154 mm
(A)
Repeatability mm < 0,02 (limited by the resolution of the output value)

Hysteresis < ± 0,005% FS (min 0,010 mm)

Sampling time ms 1 (for stroke from 1000) 2 (for stroke from 1100 to 2000) 4 (for stroke >2000)

ELECTRICAL CONNECTIONS
OUTPUT WPP-S-B OUTPUT WPP-S-C OUTPUT WPP-S-D OUTPUT WPP-S-H OUTPUT WPP-S-F/R

Function WPP-S-B WPP-S-C WPP-S-D WPP-S-H WPP-S-F WPP-S-R CAV00X

6-pin M16 8-pin M16 7-pin M16 8-pin M12 Cable output PUR cable Optional 8-pin
output cable

Data - 1 5 1 5 Orange Pink Green

Data + 2 2 2 2 Orange / White Blue Gray

Clock + 3 1 3 3 Green / White Gray Pink

Clock - 4 3 4 1 Green Yellow Yellow

Power supply + 5 7 5 7 Blue / White Green Brown

Power supply GND 6 6 6 6 Blue Brown Blue

n.c. - 8 7 8 - - White

n.c. - 4 - 4 - - Red

The transducer case must be grounded with the cable sheathing on the control system side only.
ORDER CODE

Position
transducer W P P S 0 0 0 0 X X X X 0 X X

SSI digital output S

Data resolution Outputs
Connector 0.020 mm 3 Outputs B, C, H 00
DIN45322 6-pin 0.040 mm 4 F outputs cables length
B
connector output
1 meter (standard) 00
Available on request
2 meters 02
DIN45326 8-pin
C
connector output 3 meters 03
DIN45329 7-pin 4 meters 04
D
connector output
5 meters 05
M12 8-pin
H 10 meters 10
connector output
15 meters 15
Cable output PVC 6-pin Scale orientation
F
(1 meter)
Ascending
Cable output PUR high 1
R (standard)
flexibility 7-pin 7x0,14
Descending 2

Model Ascending
(over sampling refresh 4
output 4 KHz)
Output
Binary data code output B
Mechanical and/or electrical characteristics differing from those in the
Gray data code output G standard version may be arranged on request

Data length
Data length 24 bit 3
Data length 25 bit 4
Data length 21+1 bit
5
(FM357)

Ex.: WPP-S-B-0400-B-3 0000-X-X-1-1-X-00-X-0-XX

Transducer model WPP, SSI output, connector B, model 400, binary data code output, data length 24 bit, system resolution
0.020mm, scale orientation ascending.

CURSORS ON REQUEST
PCUR202 PCUR210 PCUR211 PCUR212

Sliding cursor, Sliding cursor, Sliding cursor,

Floating Cursor
axial joint low axial joint high axial joint angle

37.6
4.8 14 14 4.8
5

Angle joint
15.8

M5 holes
x 10 mm
32

Axial
joints
28.3
 BRACKETS ON REQUEST

P K I T

Brackets (2 brackets for every kit)

Steel brackets, interaxis 42.5mm 090
Steel brackets, interaxis 50mm 091

Brackets code Interaxis (i) Screw (V) Dimension (A)

PKIT090 42.5 M4 56
PKIT091 50 M5 63.5

OPTIONAL CONNECTORS
For output H, M12 connector thread For outputs B-C-D, M16 connector thread
Codes: CON035 for 8-pin output (WPP-S-H) Codes: CON021 for 6-pin output (WPP-S-B)
CON042 for 8-pin output (WPP-S-H) CON022 for 6-pin output (WPP-S-B)
CON023 for 6-pin output (WPP-S-B)
CON026 for 7/8-pin output (WPP-S-C/D)
CON027 for 7/8-pin output (WPP-S-C/D)
CON028 for 7/8-pin output (WPP-S-C/D)
Connector extraction length 10 mm
Cable camp Cable camp Cable camp
for ø6.5 cable for ø5 cable for ø6 - ø8 cable

Cable camp Cable camp

for ø6 - ø8 cable for ø5 - ø8 cable

CON035 CON042 CON021 CON022 CON023

IP67 - IEC 48B IP67 CON026 CON027 CON028
IP40 - EMC IP67 - EMC IP67 - EMC

Note: 1. The IP rating specified in this document normally applies with the suitable female connector plugged-in and properly wired..
 OPTIONAL CABLES OUTPUT H
8-pin cable code WPP-S-H
CODE
Length “L”
Straight cable 90° cable
2 mt CAV002 CAV005

5 mt CAV003 CAV006

10 mt CAV004 CAV007

15 mt CAV009 CAV008

PREWIRED CABLE WITH STRAIGHT CONNECTOR PREWIRED CABLE WITH 90° CONNECTOR

Approx 50

The cable sheathing is

connected to the connector

The cable sheathing is

connected to the connector

Approx 36

Electrical installation requirements and Conformity certificate are available on our web site: www.gefran.com

GEFRAN spa reserves the right to make aesthetic or functional changes at any time and without notice

GEFRAN spa
via Sebina, 74 - 25050 PROVAGLIO D’ISEO (BS) - ITALIA
ph. 0309888.1 - fax. 0309839063 Internet: http://www.gefran.com DTS_WPP-S_01-2019_ENG