Scribd
Upload
166 views3 pages

TGI Sabana Gas Transport: Operating Conditions Normal D E F A B C

Uploaded by

hernan plazas

The document is a data sheet providing specifications for a centrifugal and axial compressor. It includes operating conditions over multiple points with parameters such as gas flow, temperatures, pressures, power requirements, and speed. It also notes the gas handled, site location, manufacturer, model, driver type, and notes the data should be supplied by the purchaser or manufacturer depending on the information.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

TGI Sabana Gas Transport: Operating Conditions Normal D E F A B C

Uploaded by

hernan plazas
166 views3 pages
The document is a data sheet providing specifications for a centrifugal and axial compressor. It includes operating conditions over multiple points with parameters such as gas flow, temperatures, pressures, power requirements, and speed. It also notes the gas handled, site location, manufacturer, model, driver type, and notes the data should be supplied by the purchaser or manufacturer depending on the information.

Original Title

SABANA_TGI_110621+API_Datasheet_Rev01

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

The document is a data sheet providing specifications for a centrifugal and axial compressor. It includes operating conditions over multiple points with parameters such as gas flow, temperatures, pressures, power requirements, and speed. It also notes the gas handled, site location, manufacturer, model, driver type, and notes the data should be supplied by the purchaser or manufacturer depending on the information.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
166 views3 pages

TGI Sabana Gas Transport: Operating Conditions Normal D E F A B C

Uploaded by

hernan plazas
The document is a data sheet providing specifications for a centrifugal and axial compressor. It includes operating conditions over multiple points with parameters such as gas flow, temperatures, pressures, power requirements, and speed. It also notes the gas handled, site location, manufacturer, model, driver type, and notes the data should be supplied by the purchaser or manufacturer depending on the information.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 3

JOB NO. 751101001 ITEM NO.

PURCHASE ORDER NO.

INQUIRY NO.

CENTRIFUGAL AND AXIAL COMPRESSOR REVISION NO. 1 DATE 21. Jun. 2011

DATA SHEET (API 617-7TH Chapter 2) PAGE 1 OF 7 BY S. Aslivar

SI UNITS
1 APPLICABLE TO: PROPOSAL PURCHASE AS BUILT

2 FOR TGI UNIT

3 SITE SABANA SERIAL NO.

4 SERVICE Gas Transport NO. REQUIRED

5 MANUFACTURER MAN Diesel & Turbo DRIVER TYPE (1-3.1.1) VFD


6 MODEL MOPICO RM 40 DRIVER ITEM NO.

8 INFORMATION TO BE COMPLETED: BY PURCHASER BY MANUFACTURER MUTUAL AGREEMENT (PRIOR TO PURCHASE)

9 OPERATING CONDITIONS

10 NORMAL
(ALL DATA ON PER UNIT BASIS) A B C D E F
11

12 GAS HANDLED (ALSO SEE PAGE 2 ) CnHm CnHm CnHm CnHm CnHm CnHm
13 GAS PROPERTIES (1-2.1.1.4)

14 MMSCFD (14.7 psiA, 60°F) WET 280 277 277 260 245 230
15 WEIGHT FLOW (lb/min) WET 10'230 10'121 10'121 9'500 8'952 8'403
16 INLET CONDITIONS

17 PRESSURE (psiG) 280.0 300.0 320.0 340.0 360.0 380.0


18 TEMPERATURE (°F) 40.0 40.0 40.0 40.0 40.0 40.0
19 RELATIVE HUMIDITY %

20 MOLECULAR WEIGHT (kg/kmol) 19.97 19.97 19.97 19.97 19.97 19.97


21 Cp/Cv ( K 1 ) OR (K AVG ) 1.312 1.314 1.315 1.325 1.324 1.337
22 COMPRESSIBILITY (Z 1 ) OR (Z AVG ) 0.962 0.958 0.953 0.949 0.944 0.941
23 INLET VOLUME (ACFM) WET 8'979 8'280 7'747 6'829 6'061 5'381
24 DISCHARGE CONDITIONS

25 PRESSURE (psiG) 530 530 530 530 530 530


26 TEMPERATURE (°F) 123.4 114.6 106.2 98.2 90.9 84.3
27 Cp/Cv (K 2 ) OR (K AVG ) (NOTE 1) 1.214 1.233 1.258 1.270 1.290 1.307
28 COMPRESSIBILITY (Z 2 ) OR (Z AVG ) (NOTE 1) 0.939 0.939 0.937 0.935 0.933 0.931
29 Gas HP REQUIRED 8'106 7'109 6'258 5'111 4'158 3'337
30 TRAIN BHP REQUIRED (AT COMPRESSOR COUPLING) 8'106 7'109 6'258 5'111 4'158 3'337
31 BHP REQUIRED AT DRIVER INCL. EXT. LOSSES (GEAR, ETC.) 8'106 7'109 6'258 5'111 4'158 3'337
32 SPEED (RPM) 9'902 9'326 8'786 8'142 7'530 6'935
33 TURNDOWN (%) 0.0 0.0 0.0 0.0 0.0 0.0
34 POLYTROPIC HEAD (ft.) 21'947 19'511 17'206 15'027 13'001 11'123
35 POLYTROPIC EFFICIENCY (%) 86.3 86.3 86.2 86.4 86.6 86.6
36 CERTIFIED POINT

37 EXPECTED OPERATION AT EACH CONDITION (%)

38 PERFORMANCE CURVE NUMBER

39 PROCESS CONTROL (1-3.4.2.1)

40 METHOD SUCTION THROTTLING VARIABLE INLET SPEED VARIATION DISCHARGE COOLED BYPASS

41 FROM (BAR)(kPa abs) GUIDE VANES FROM 30 % BLOWOFF FROM

42 TO (BAR)(kPa abs) (2-3.4.2.2) TO 1) 105 % TO TO

43 SIGNAL SOURCE (1-3.4.2.1)

44 TYPE ELECTRONIC PNEUMATIC OTHER

45 RANGE mA (BAR)(kPa abs)

46

47 ANTI-SURGE SYSTEM (1-3.4.2.2)

48 REMARKS: 1) 9'902 rpm = 100%

49

50 NOTE 1: IF GAS ANALYSIS IS GIVEN, MANUFACTURER SHALL SUPPLY DATA, OTHERWISE DATA SHALL BE SUPPLIED BY USER.

2THERM110621+API_Datasheet_SABANA_TGI_Gas_Transport_Rev01.xls
JOB NO. 751101001 ITEM NO.
PURCHASE ORDER NO.

INQUIRY NO.

CENTRIFUGAL AND AXIAL COMPRESSOR REVISION NO. 1 DATE 21. Jun. 2011

DATA SHEET (API 617-7TH Chapter 2) PAGE 1b OF 7 BY S. Aslivar

SI UNITS
1 APPLICABLE TO: PROPOSAL PURCHASE AS BUILT

2 FOR TGI UNIT

3 SITE SABANA SERIAL NO.

4 SERVICE Gas Transport NO. REQUIRED

5 MANUFACTURER MAN Diesel & Turbo DRIVER TYPE (1-3.1.1) VFD


6 MODEL MOPICO RM 40 DRIVER ITEM NO.

8 INFORMATION TO BE COMPLETED: BY PURCHASER BY MANUFACTURER MUTUAL AGREEMENT (PRIOR TO PURCHASE)

9 OPERATING CONDITIONS

10 NORMAL
(ALL DATA ON PER UNIT BASIS) G H I J K
11

12 GAS HANDLED (ALSO SEE PAGE 2 ) CnHm CnHm CnHm CnHm CnHm
13 GAS PROPERTIES (1-2.1.1.4)

14 MMSCFD (14.7 psiA, 60°F) WET 205 190 175 140 100
15 WEIGHT FLOW (lb/min) WET 7'490 6'942 6'394 5'115 3'654
16 INLET CONDITIONS

17 PRESSURE (psiG) 400.0 420.0 440.0 460.0 480.0


18 TEMPERATURE (°F) 75.0 75.0 75.0 75.0 75.0
19 RELATIVE HUMIDITY %

20 MOLECULAR WEIGHT (kg/kmol) 19.97 19.97 19.97 19.97 19.97


21 Cp/Cv ( K 1 ) OR (K AVG ) 1.291 1.298 1.302 1.305 1.311
22 COMPRESSIBILITY (Z 1 ) OR (Z AVG ) 0.950 0.946 0.943 0.939 0.935
23 INLET VOLUME (ACFM) WET 4'931 4'341 3'811 2'910 1'986
24 DISCHARGE CONDITIONS

25 PRESSURE (psiG) 530 530 530 530 530


26 TEMPERATURE (°F) 113.4 108.2 103.9 102.0 103.6
27 Cp/Cv (K 2 ) OR (K AVG ) (NOTE 1) 1.237 1.252 1.264 1.266 1.265
28 COMPRESSIBILITY (Z 2 ) OR (Z AVG ) (NOTE 1) 0.939 0.938 0.937 0.936 0.936
29 Gas HP REQUIRED 2'588 1'977 1'458 901 476 0
30 TRAIN BHP REQUIRED (AT COMPRESSOR COUPLING) 2'588 1'977 1'458 901 476 0
31 BHP REQUIRED AT DRIVER INCL. EXT. LOSSES (GEAR, ETC.) 2'588 1'977 1'458 901 476 0
32 SPEED (RPM) 6'461 5'853 5'235 4'496 3'717 0
33 TURNDOWN (%) 0.0 0.0 0.0 0.0 0.0 0.0
34 POLYTROPIC HEAD (ft.) 9'636 7'929 6'330 4'805 3'374
35 POLYTROPIC EFFICIENCY (%) 86.7 86.9 87.1 86.9 85.1
36 CERTIFIED POINT

37 EXPECTED OPERATION AT EACH CONDITION (%)

38 PERFORMANCE CURVE NUMBER

39 PROCESS CONTROL (1-3.4.2.1)

40 METHOD SUCTION THROTTLING VARIABLE INLET SPEED VARIATION DISCHARGE COOLED BYPASS

41 FROM (BAR)(kPa abs) GUIDE VANES FROM 30 % BLOWOFF FROM

42 TO (BAR)(kPa abs) (2-3.4.2.2) TO 1) 105 % TO TO

43 SIGNAL SOURCE (1-3.4.2.1)

44 TYPE ELECTRONIC PNEUMATIC OTHER

45 RANGE mA (BAR)(kPa abs)

46

47 ANTI-SURGE SYSTEM (1-3.4.2.2)

48 REMARKS: 1) 9'902 rpm = 100%

49

50 NOTE 1: IF GAS ANALYSIS IS GIVEN, MANUFACTURER SHALL SUPPLY DATA, OTHERWISE DATA SHALL BE SUPPLIED BY USER.

2THERM110621+API_Datasheet_SABANA_TGI_Gas_Transport_Rev01.xls
JOB NO. 751101001 ITEM NO.

CENTRIFUGAL AND AXIAL COMPRESSOR REVISION NO. 1 DATE 21. Jun. 2011

DATA SHEET (API 617-7TH Chapter 2) PAGE 2 OF 7 BY S. Aslivar

SI UNITS
1 OPERATING CONDITIONS (Continued) (1-2.1.1.1) (1-3.1.2) (1-3.1.3)

2 GAS ANALYSIS: OTHER CONDITIONS

NORMAL A B C D E REMARKS:
3 MOL %

4 MW

5 AIR 28.966

6 OXYGEN 31.999

7 NITROGEN 28.016

8 WATER VAPOR 18.016

9 CARBON MONOXIDE 28.01

10 CARBON DIOXIDE 44.01 1.74

11 HYDROGEN SULFIDE 34.076 (1-2.2.1.6)

12 HYDROGEN 2.016 (1-2.2.1.9)

13 METHANE 16.043 83.2

14 ETHYLENE 28.052

15 ETHANE 30.07 9.85

16 PROPYLENE 42.078

17 PROPANE 44.097 3.47

18 I-BUTANE 58.124 0.47

19 n-BUTANE 58.124 0.52

20 I-PENTANE 72.151 0.09

21 n-PENTANE 72.151 0.06

22 HEXANE PLUS 0.6

23 CORROSIVE AGENTS (1-2.2.1.3)

24

25 TOTAL 100.00

26 AVG. MOL. WT. 19.97

27 LOCATION: (1-2.1.8) NOISE SPECIFICATIONS: (1-2.1.9)

28 INDOOR OUTDOOR GRADE APPLICABLE TO MACHINE:

29 HEATED UNDER ROOF MEZZANINE SEE SPECIFICATION

30 UNHEATED PARTIAL SIDES APPLICABLE TO NEIGHBORHOOD:

31 ELEC. AREA CLASSIFICATION (1-2.1.14) CL GR DIV SEE SPECIFICATION

32 SITE DATA (1-2.1.8) ACOUSTIC HOUSING: YES NO

33 ELEVATION m BAROMETER 14.504 psi APPLICABLE SPECIFICATIONS:

34 RANGE OF AMBIENT TEMPS: API 617, 7TH CHAPTER 182

35 DRY BULB WET BULB VENDOR HAVING UNIT RESPONSIBILITY (1-1.5.53) (1-1.8) (1-2.1.3)

36 NORMAL °C

37 MAXIMUM °C GOVERNING SPECIFICATION (IF DIFFERENT)

38 MINIMUM °C

39

40 UNUSUAL CONDITIONS: DUST FUMES PAINTING:

41 °C MANUFACTURER'S STD.

42 OTHER (1-2.1.8) OTHER

43

44 COPPER AND COPPER ALLOYS PROHIBITED (1-2.2.1.14) SHIPMENT: (4.4)

45 COATING: (1-2.2.1.16) DOMESTIC EXPORT EXPORT BOXING REQ'D.

46 ROTATING COMPONENTS OUTDOOR STORAGE MORE THAN 6 MONTHS (1-4.4.1) MO

47 STATIONARY COMPONENTS SPARE ROTOR ASSEMBLY PACKAGE (1-4.4.3.10)

48 REMARKS: HORIZONTAL STORAGE VERTICAL STORAGE

49

You might also like