Scribd
Upload
97 views1 page

Ethernet Uplink Cards PDF

This document provides information on Ethernet uplink card panels, functions, interfaces, indicators, and technical specifications. It describes 3 types of 10GE Ethernet uplink cards, as well as multi-rate cards that support both 10GE and GE interfaces. The cards provide optical and electrical Ethernet interfaces, support functions like SynE and IEEE 1588, and have indicators to show card status and interface status/activity. Dimensions, power consumption and weight are specified for each card type.

Uploaded by

Alexander Pischulin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views1 page

Ethernet Uplink Cards PDF

This document provides information on Ethernet uplink card panels, functions, interfaces, indicators, and technical specifications. It describes 3 types of 10GE Ethernet uplink cards, as well as multi-rate cards that support both 10GE and GE interfaces. The cards provide optical and electrical Ethernet interfaces, support functions like SynE and IEEE 1588, and have indicators to show card status and interface status/activity. Dimensions, power consumption and weight are specified for each card type.

Uploaded by

Alexander Pischulin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Ethernet Uplink Cards

Support Ethernet uplink.

Panels

 10GE Ethernet Uplink Cards

 10GE/GE Ethernet Uplink Cards

 GE Ethernet Uplink Cards

Functions

 Provides 10GE/GE optical interface and GE electrical interface for


Ethernet uplink.
 XUTQ and XUVQ work with SCXL.
 XUVQ and HUVQ support SynE and IEEE 1588 TC functions.

Interfaces

XUTQ
XG1-XG4 Four 10GE optical interfaces
XUVQ
HUTQ XG1-XG2 Two 10GE optical interface ( XG1～XG2) and two
HUVQ GE1-GE2 GE optical interfaces( GE1～GE2)

Four GE optical interfaces ( with GFSQ daughter-


GUFQ card) or four FE optical interfaces (with FFSQ
daughter-card)
GE1-GE4
Two GE/FE optical interfaces (with GFSD/ FFSD
GUSQ daughter-card), and two GE electrical interface
(with GTSD daughter-card)

Indicators

OFF The card is not powered ON.


Green LED flashes
The card works properly (INSERVICE).
slowly (1 Hz)
The card is in configuration process.
Green LED flashes
quickly (2 Hz) The card is in BOOT writing process.
Do Not pull out the card.
The card is in version starting
RUN
process.
Green LED is ON The card is in BOOTROM program.
The card is in PLD upgrading process.
The card is seriously faulty, such as
Red LED is ON
hardware fault.
Yellow LED flashes The card type is inconsistent with
slowly (1 Hz) configuration (TYPEMISMATCH).
OFF The link is down.
ACT1-ACT4 The link is up, but no data
XG1-XG2 Green LED is ON
transmission.
GE1-GE2
The interface is transmitting and
Green LED flashes
receiving data.

Technical Specifications

Dimensions Power Consumption


(height × width × depth) Weight
Static Maximum Typical
XUTQ 20 W 22 W 20 W 0.514 kg
XUVQ 23 W 25 W 23 W 0.535 kg
HUTQ 197.75 mm × 25 mm × 13 W 15 W 13 W 0.420 kg
HUVQ 225 mm 13 W 15 W 13 W 0.432 kg
GUFQ 4W 5W 4W 0.506 kg
GUSQ 4W 5W 4W 0.466 kg

You might also like