6 to14/2 ways/positions RE 18302-10/07.

12
Replaces: 12.09
1/8

bankable flow diverters flangeable

L745... (VS281F-VS285F-VS286F-VS287F-VS289F)

Size 10
Series 00
Maximum operating pressure 310 bar [4500 psi]
Maximum flow 90 l/min [23.77 gpm]
Ports G 1/2 - SAE10 - M18x1.5 - JIS B 1/2 - M22x1.5
DVI0085

Summary General specifications

Description Page - 6 way 2 position valve.
General specifications 1 - Directional spool valve with direct solenoid control.
Ordering details 2 - Hydraulic / pneumatic pilot , or manual push and twist control
Spool variants 2 available as option.
Principles of operation, cross section 3 - Usable as stand-alone, or as multiple stackable units.
Technical data 3 - Control spool operated by solenoid.
Δp-Qv characteristic curves 5 - Wet pin tube for DC coil, with push rod for mechanical
override in case of voltage shortage.
External dimensions and fittings 6
- Unrestricted 360° orientation of DC coil.
Electric connections 8
- Control spool held in normal position by return spring.
- Optional manual override (push-button or screw type).
- Connectors available: DIN 43650 – ISO 4400, AMP Junior,
DT04-2P (Deutsch), Free leads.
2/8 Bosch Rexroth Oil Control S.p.A. VS281F-VS285F-VS286F-VS287F-VS289F RE 18302-10/07.12

Ordering details

L 7 45 _ __ __ _ __ __ _
Family Assembly
Compact directional 0= Single diverter
valve 2= 2 Pre-assembled diverters
3= 3 Pre-assembled diverters
Type 4= 4 Pre-assembled diverters
Flow Diverters 5= 5 Pre-assembled diverters
Electric connections
Ports
00 = Without coils
G1/2 DIN 3852 =4
01** = With coils, without mating connector DIN
7/8-14 UNF (SAE10) =D EN 175301-803
M18x1.5 ISO6149-1 =Y 03 = With coils, with bi-directional diode, without
JIS B 1/2 =L mating connector vertical Amp-Junior
M22x1,5 DIN 3852 =X 07 = With coils, with bi-directional diode, without
Control type mating connector DT04-2P
Solenoid (coil C 65) 31 = With coils and bipolar sheathed lead
without manual override = 13 350mm [13,8 in] long
Solenoid (coil C 65) with push-button Voltage supply
type manual override = 1P SG = Manual push and twist control
Solenoid (coil C 65) with screw
type manual override = 1F 00 = Without coil
Hydraulic / pneumatic control = P1 OB = 12V DC
Manual push and twist control = H1 AD = 13V DC
OC = 24V DC
Spool variants AC = 27V DC
6 way / 2 position P1 side = 6_ OD = 48V DC
31 07 03 01 00
Available
connections
Drain type
I= Internal drain
E= External drain
** For connectors ordering code see data sheet RE 18325-90.
Spool variants
C1 C4 C1 C4
C2 C2
C3 C3
I 1 0 E 1 0
a a

P1 P2 P1 P2

6A = 6E = I E
6A =
6B =
6B = 6G = 6D =
6E =
6G =
6D = 6H = 6H =
RE 18302-10/07.12 VS281F-VS285F-VS286F-VS287F-VS289F Bosch Rexroth Oil Control S.p.A. 3/8

Principles of operation, cross section

A valve basically consists of a housing (1), a control spool (2), a The coil (5) is fastened to the tube by the ring nut (6).
return spring (3) and a solenoid (5). It is designed to connect The manual override (7) allows to shift the spool (2) also in
two inlet lines P1 – P2 (normally a set of hoses) and divert case of voltage shortage.
them to either the outlet ports (C1 – C4) with spool in position
An external drain, to be connected to tank, ensures shifting
“0”, when the solenoid is de-energized, or to the outlet ports
operations also at higher working pressure.
(C2 – C3) with spool in position “1”, when the solenoid is
energized. Hydraulic / pneumatic pilot control, or manual push and twist
control for spool shifting are available upon request.
With the coil de-energized, the return spring (3) pushes back
the spool (2) and holds it in position “0”.

C1 P1 C2 C4 P2 C3

7 6 5 1 2 3 4

Technical Data (for applications with different specifications consult us)

General
Valve weight kg [lbs] 4.15 [9.15]
Mounting position unrestricted
Ambient Temperature °C [°F] –20....+50 [-4....+122] (NBR seals)

Hydraulic
Maximum pressure with external drain (“E” type) bar [psi] 310 [4500]
Maximum pressure with internal drain (“I” type) bar [psi] 250 [3625]
Maximum pressure with internal drain and 6F or
bar [psi] 310 [4500]
6G or 6H scheme
Maximum flow l/min [gpm] 90 [24]
Hydraulic fluid
Mineral oil based hydraulic fluids HL (DIN 51524 part 1).
General properties: it must have
physical lubricating and chemical Mineral oil based hydraulic fluids HLP (DIN 51524 part 2).
properties suitable for use in For use of environmentally acceptable fluids (vegetable or polyglycol base)
hydraulic systems such as, for please consult us.
example:
Fluid Temperature °C [°F] –20....+80 [-4....+176] (NBR seals)
ISO 4572: βx≥75 X=12...15
Permissible degree of fluid contamination ISO 4406: classe 20/18/15
NAS 1638: classe 9
Viscosity range mm2/s 5....420
Internal leakage with 100 bar [1450 psi] cc/min
min.10 [0.61] max. 25 [1.52]
secondary pressure at C [in3/min]
4/8 Bosch Rexroth Oil Control S.p.A. VS281F-VS285F-VS286F-VS287F-VS289F RE 18302-10/07.12

Electrical
Voltage type DC
Voltage tolerance (nominal voltage) % -10 .... +10
Duty % Continuous, with ambient temperature ≤ 50°C [122°F]
Coil wire temperature not to be exceeded °C [°F] 150 [302]
Insulation class H
Compliance with Low Voltage Directive LVD 73/23/EC (2006/95/EC), 2004/108/EC
Coil weight with DIN 43650 – ISO 4400 connector kg [lbs] 1.05 [2.3]
Voltage V 12 13 24 27 48
Voltage type DC DC DC DC DC
Power consumption W 44 44 44 44 44
Current (nominal at 20°C [68°F]) A 3.6 3.4 1.8 1.60 0.90
Resistance (nominal at 20°C [68°F]) Ω 3.2 3.6 12.8 16.9 50.5

Voltage (V) Connector type Coil description Marking Coil Mat no.
EN 175301-803
=OB 01 12 DC C6501 12DC 12 DC R933000100
(Ex. DIN 43650)
=OB 03 12 DC AMP JUNIOR C6503 12DC 12 DC R933000119
=OB 07 12 DC DEUTSCH DT 04-2P C6507 12DC 12 DC R933000107
=OB 31 12 DC Cable 350 mm long C6531 12DC 12 DC R933000104
EN 175301-803
=AD 01 13 DC C6501 13DC 13 DC R933000101
(Ex. DIN 43650)
=AD 07 13 DC DEUTSCH DT 04-2P C6507 13DC 13 DC R933000112
EN 175301-803
=OC 01 24 DC C6501 24DC 24 DC R933000102
(Ex. DIN 43650)
=OC 03 24 DC AMP JUNIOR C6503 24DC 24 DC R933000120
=OC 07 24 DC DEUTSCH DT 04-2P C6507 24DC 24 DC R933000111
=OC 31 24 DC Cable 350 mm long C6531 24DC 24 DC R933000110
EN 175301-803
=AC 01 27 DC C6501 27DC 27 DC R933000103
(Ex. DIN 43650)
=AC 03 27 DC AMP JUNIOR C6503 27DC 27 DC R93307055
=AC 07 27 DC DEUTSCH DT 04-2P C6507 27DC 27 DC R933000113
EN 175301-803
=OD 01 48 DC C6501 48DC 48 DC R933000114
(Ex. DIN 43650)
RE 18302-10/07.12 VS281F-VS285F-VS286F-VS287F-VS289F Bosch Rexroth Oil Control S.p.A. 5/8

Characteristic curves
Measured with hydraulic fluid ISO-VG32 at 45° ± 5° C [113° ± 9° F]; ambient temperature 20° C [68° F].

psi bar 1 2
180 12

135 9
PRESSURE-Δp

Curve n
P1 > C1 P2 > C4 P1 > C2 P2 > C1
90 6
1 1 2 2

45 3

0 0
0 15 30 45 60 75 90 l/min
0 4 8 12 15 18 24 gpm
FLOW-Q

Performances limits

psi bar 1 2
5000 350
300
4000
PRESSURE-p

Curve n. Drain type

3000 200 1 External (-E-)
2 Internal (-I-)
2000
100
1000
Flow across both ways: forward across P1>C1 and
0 0 reverse across C4>P2
0 20 40 60 80 100 l/min
0 5 10 15 20 25 26.4 gpm
FLOW-Q
6/8 Bosch Rexroth Oil Control S.p.A. VS281F-VS285F-VS286F-VS287F-VS289F RE 18302-10/07.12

External Dimensions and Fittings

1 Ports P1, P2, C1, C2, C3, C4. opening: it is pressure stuck to the ring nut for coil locking.
2 The mounting surface flatness must comply with specifications. Mat no. R933003424.
3 Two through installation holes reccomended screws M8x65 8 Optional screw, 1F type, manual override for spool opening:
DIN 912 with strength class DIN 8.8. it is screwed (torque 8-9 Nm [5.9-6.6 ft-lb]) to the tube as
Torque 15-16 Nm [11.1 – 11.8 ft-lb]. replacement of the coil ring nut.
Mat no. R933003713.
4 Ring nut for coil locking OD 34 mm [1.34 inch].
Torque 7-8 Nm [5,25,9 ft-lb]. 9 External drain plug with G 1/4 and SAE 4 port.
5 Solenoid tube Ø 25,4 mm [1 inch]. 10 Four through holes, 8.5 mm dia., for coupling of other
similar diverter valve.
6 Minimum clearance needed for connector removal.
11 Identification label.
7 Optional push-button, 1P type, manual override for spool
RE 18302-10/07.12 VS281F-VS285F-VS286F-VS287F-VS289F Bosch Rexroth Oil Control S.p.A. 7/8

External Dimensions and Fittings

Stroke

Total Torque
Total ports Total length mm Bolts (v) or Tie Rods (t)
stacked units Nm / ft-lb
2 8 132 M8x125 (v) 16-18 / [11.8-13.2]
3 10 198 M8x190 (v) 16-18 / [11.8-13.2]
4 12 264 M8x270 (t) 16-18 / [11.8-13.2]
5 14 330 M8x330 (t) 16-18 / [11.8-13.2]

12 Manual version, push and twist type. 15 Four screws M8x190 DIN 912 for assembly of 3 units;
13 Hydraulic / pneumatic piloted version. Pilot port plug strength class DIN 8.8.
available with G 1/4 and SAE4. Torque 15-16 Nm [11.1 – 11.8 ft-lb].
14 Four screws M8x125 DIN 912 for assembly of 2 units; 16 Modular relief valves (cartridges VMD1070SV):
strength class DIN 8.8. with G 1/2 ports, code L7404610214SV00
Torque 15-16 Nm [11.1 – 11.8 ft-lb]. with SAE 10 ports, code L740D610214SV00.
Max pressure 250 bar [3625psi].
8/8 Bosch Rexroth Oil Control S.p.A. VS281F-VS285F-VS286F-VS287F-VS89F RE 18302-10/07.12

Electric connection

=00 =01

Protection class: IP 65 with female connector Protection class: IP 69 K with female connector
properly fitted (see drawing). properly fitted (see drawing).

=03 =07

=31

Bosch Rexroth Oil Control S.p.A. © This document, as well as the data, specifications and other information set
Oleodinamica LC Division forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may
Via Artigianale Sedrio, 12 not be reproduced or given to third parties without its consent.
42030 Vezzano sul Crostolo The data specified above only serve to describe the product. No statements
Reggio Emilia - Italy concerning a certain condition or suitability for a certain application can be
Tel. +39 0522 601 801 derived from our information. The information given does not release the user
Fax +39 0522 606 226 / 601 802 from the obligation of own judgment and verification. It must be remembered that
[email protected] our products are subject to a natural process of wear and aging.
www.boschrexroth.com
Subject to change.