S-Series

Combines

Harvest in Record Time

2 |

HARVEST IN
RECORD TIME.
THE NEW
S-SERIES

Start your next harvest season with a combine that makes it easy for you to get the best out
of your crop, even in tough conditions. The new S-Series not only increases your productivity
and efficiency but also reduces your total cost of harvesting – and that’s something you can
rely on in every situation.
 | 3

Table of Content 

Development ........................................................................ 6
overview .............................................................................. 8
headers ...............................................................................10
Feederhouse ........................................................................12
rotor ...................................................................................14
Cleaning Shoe  .....................................................................18
active Tailings management ................................................ 20
active Terrain adjustment ....................................................21
hillmaster  .......................................................................... 22
grain Tank ...........................................................................24
residue management .......................................................... 26
Transmission  ...................................................................... 30
Tracks  ................................................................................ 32
engine  ............................................................................... 34
Cab  .................................................................................... 36
Connected Combine ............................................................ 40
StarFire 6000 and automation  ........................................... 42
Telematics  .......................................................................... 42
Combine Simulator .............................................................. 46
machine Sync .......................................................................47
True harvesting Partner ...................................................... 48
low Cost of operation ........................................................ 50
Service and parts ................................................................ 52
Specifi cations ..................................................................... 56

new dynaflo plus cleaning system Gentle on grain

The new cleaning system provides the most The single rotor concept together with the active Tailings return, ensures
effi cient cleaning of grain combined with  smooth threshing, direct crop fl ow and excellent grain quality.
lightweight construction, ensuring maximum
performance and reliability.
4 |

WorlD leaDing TeChnology

unrivalleD PerFormanCe
The single rotor combine is the logical evolution of years of designing, testing and listening to
customers. Conventional combines offer excellent performance in specific areas. But single rotor
combines are simply better all round.
John Deere invests more than any other agricultural equipment manufacturer in research and
development. Now we’ve created the S-Series. Developed in Europe, it’s also built in Europe.
Designed for heavy, dense crops and high capacity, it doesn’t just harvest more tonnes per hour,
it minimises losses and broken kernels so more than 99% of the grain goes into your tank and that
means more money in your pocket.
 | 5

up to 5%
More perforMance

with 40k in Minutes

to the neXt field

eXceptional Grain quality

lowest cost of operation
6 |

The baSiS For ToP

PerFormanCe:
CuSTomer FoCuS,
TruST anD reliabiliTy

Increasing distances to fi elds and more  the pre-chaffer and the fan type. 
contracting work are also trends we We consciously decided against
observed. But we also notice the need  including active cleaning shoe levelling
to train operators more professionally due to the excellent performance of our
and manage people, machines and data cleaning shoe on slight side slopes. 
through more professional systems.  This was the result of our research and
confi rms what our customers already 
know: “if there’s a side slope, you need
better than ever: cleaninG shoe, HillMaster. But for slopes under 7%, 
feederhouse and data you can do without.”
in designing the new S-Series, we fully
ManaGeMent functionality
focused on the needs and wishes of our
customers: more performance at low The new DynaFlo Plus cleaning shoe has
loss levels even on hillsides going up or been optimised by our engineers from 
downhill, less sensitivity and easier the ground up. Through the adjustment 
adjustment of the whole combine to  of the crop fl ow and air fl ow speeds, 
make the operation possible, even  we were able to achieve maximum 
for inexperienced drivers. Weather  throughput and minimal losses. We did 
conditions resulting in down crop not just extend the cleaning shoe to
occur more often which can slow the rear – we completely re-designed it. 
down harvesting signifi cantly.  We have kept proven elements such as
 | 7

“Made in Germany”
quality from zweibrücken
since 1863

Every idea had to meet our strict

requirements.
We did not pursue any idea that
did not fulfill our strict requirements
for user-friendly operation and
maintenance. We also deployed
forward-thinking technologies from
other industries. For example, our
cleaning shoe now features lightweight
aluminium components. Our tests have
led to the development of completely
new connections with rivets that are
commonly used in aircraft construction.
This cleaning shoe has already proven
itself by withstanding over 2,500 hours
on the test bench.
We’re well-known for our reliability –
and this continues to be the main goal
of our development.
farming practice demand best in class
chopping quality and residue
distribution. This is why uniquely John Deere has been building
developed residue packages are combine harvesters since 1927.
available for European conditions. Due We are the largest combine
to the wide range of individual options harvester manufacturer in
John Deere ensures the outstanding the world. To date, over 750,000
performance of the S-Series combines John Deere combine harvesters
in all crops and conditions. have been produced.
Over 20,000 hours testing in 53 countries Field tests included not only wheat
and 36 different crop types makes the and canola but also rice, soya, wet corn,
S-Series the most widely tested combine grass seed and many other crops to be
ever. That testing told us that no one found in different areas of Europe.
combine configuration would meet From dry Spanish fields up to the wet
every customer requirement. challenging rape and wheat conditions
around the UK and the Baltic coast.
European crop density and high yielding
conditions require adapted threshing
and separating configurations for those
tough conditions. No till or minimum till
8 |

spacious cab John deere remote display access speeds up to 40 km/h large grain tank, ultra fast
Excellent all-round visibility and  Dealer can view the cab display  exclusive ProDrive automatic unloading
low noise level. With a volume of  remotely to offer advice on transmission with a top speed of We do not just claim it – we have it:
3.34 m³ and total glass area of  adjustments and settings. 40 km/h and fuel effi cient  14,100 l tank size and 135 l/sec
5.39 m² it is one of the largest  engine-speed management. unloading rate truly optimise
cabs on the market. Thanks to  logistics in the fi eld. Simply 
better insulation it is now quieter  the biggest in the market.
than ever.

1 2 3 4

performance where it counts. 1

everywhere.
From cutting to residue management, from the fi eld to 
the road, from fi rst use to the end of the season – the 
S-Series will support you with clever technology, valuable 
features and innovative services so you can work faster,
more comfortably and effi ciently – for top performance 
under all conditions.

10 11

the new 600X

header with the lonGest
adJustable table lenGth

9 10 11 12

wide range of headers hydraulically tiltable fast crop conversion: 660 mm (26 inch) wide suspended
True multi-crop performance.  feederhouse you can convert the whole tracks at 3.5 m width
No matter whether standard, fl ex,  increases harvesting speed in combine from crop to crop in only  For maximum soil preservation all
variable or performance increasing  down crop conditions up to 20%  a few steps to stay fl exible during  wheels touch the ground. A large 
belt headers – we have them all! as the operator can adjust the harvest. footprint of 1.18 m² is achieved at 
distance of the cutterbar to  a transport width of 3.5 m.
the ground and improve
the crop fl ow.
 | 9

active tailings system air compressor new engine technology flexible residue
Gentle threshing with real rasp bars. Soft to  Fast and simple cleaning with Stage iv engines with up to management
the grain for low grain damage. More capacity  the integrated air compressor. 617 hp and the highest Switch between chopping 
thanks to less load at the rotor and an even effi ciency for Diesel and DEF  or dropping at the touch of
spread on top of the cleaning shoe. consumption. a button.

5 6 7 8

14

13

15
8

12

vari-streaM rotor
and larGe dynaflo plus
cleaninG shoe

14,100 l Grain tank

and fastest unlaodinG rate
on the Market

13 14 15

dynaflo plus cleaning shoe active concave isolation top performance with ease
innovative light-weight aluminium cleaning Thanks to the hydraulic support of the concave The new cleaning system is extremely simple to
shoe and 12% increased sieve area combined  a higher throughput in tough crop conditions set. Even when not fully optimised, the cleaning 
with an optimised air fl ow. is achieved. shoe has an extremely stable performance curve 
which results in minimal losses.
10 |

600X Header:
Convert in the field
in just 5 minutes

What kind of header do you need? A flexible all-rounder or a specialist for specific challenges?
John Deere offers you a wide range of harvest headers so you can find just the right solution
tailored to your needs and expectations – giving you complete peace of mind that you are
always using the full potential of the S-Series. John Deere gives you a choice of headers with
passive crop flow (600R, 600F, 600X) or active crop flow (600PF or 600D) in varying widths.

Further information about John Deere headers can be found in the header brochure.
 | 11

The iDeal
heaDer For
every CroP
600r and 600f
The 600R range has a fi eld-tested, proven design 
incorporating optimum features to improve your
harvest. It has all the components you’ve come to 
expect from John Deere, including a large diameter
auger, stainless steel feed plates and the linear
knife drive. The 600F features a fl exible knife that 
can be raised or lowered by 15 cm and is controlled 
directly from the cab – making it perfect for 
harvesting close to the ground. A rapeseed header 
attachment is available for both versions.

600pf
The 600PF header with head-fi rst crop fl ow 
processes short stalked grains, laid and
long-growing crops with the same superb 
effi ciency, consistency and 10% more 
performance than the 600R. It takes just 
15 minutes to convert for rapeseed. The new 
640PF with a large 760 mm auger diameter is
the ideal partner for a large S-Series in tough
rape seed harvesting conditions.

600X
The ultimate header for harvesting a variety of
crops, with an unbeatable conversion time of 
under 3 minutes without the need for tools. With 
the longest table on the market, you won’t lose 
any grain and thanks to the longest adjustable 
table length of 800 mm, you can also respond to 
changing conditions in the fi eld from the comfort 
of the cab. With up to 6 individual fi  xed sensors 
adjusting the height of the table, your fi eld will 

*Not available for combines with the Hillmaster system

look like it has been given a close shave.

600d
The 600D* also features a head-fi rst active crop 
feeder. The crop is transported along a rubber 
belt. The height control, via gauge wheels and 
Convert from crop to crop optional sensors, as well as the hydraulic cutting
height adjustment, make for the perfect stubble 
in just 5 minutes with height. A rapeseed kit is also available.
the 600X header

specialist 600c
The 600C corn header offers you maximum
reliability due to its strong chains and unique 
loss-minimising collection concept. Headers up 
to 16 rows, rigid or folding, including header
trailer solutions for the larger heads are available 
in different row spacings.
12 |

Xtra capacity
feederhouse: perfect
crop flow and
threshing from
the very beginninG
The robust S-Series feederhouse is the ultimate
foundation for perfect results. The heavy duty chains
and large feeder slats are designed for the toughest
of conditions such as corn or rice harvest. The new
wear plates are durable and do not need to be
changed in your machine’s lifetime. The slip clutch
has an incredible capacity of 1200Nm forward
and 1400Nm reverse. What’s more, largest small
grain and corn headers can be used in the highest
yield conditions.

In the event that the feederhouse becomes blocked,

the strongest mechanical reverser will help get everything
out easily and begin harvesting again as quickly as possible.
Headers of up to 12.20 m width (up to 9.15 m in the HillMaster
version) as well as corn headers of up to 16 rows are no
problem at all.

Pivoting mid floor concept

The exclusive pivoting mid-floor concept of the
S-Series contains full length extension from pivot
point forward to the feed drum which enables
more feeding capacity by deflecting the entire
internal feederhouse components instead of only Variable Speed for large corn heads
the front drum. The exclusive 5-speed PowerShift transmission matches crop
conditions, intake and ground speed via a button on the multi-
In high volume crops this feature ensures better function control handle. It can transmit up to 202kW to corn heads
engagement of crop material and smoother of  up to 16 rows.
conveyance to the threshing and separating
components of the combine. High capacity
The wide cross-section and low profile roller increases throughput
and the 4 chain feeder system handles dense, high yielding crops.
 | 13

1200 NM slip clutch

designed for
maximum capacity

Excellent visibility Quick header hook-up

The long feederhouse and low angle gives the operator The multi-lever coupler connects all the hydraulics
a clear view to the header. and electrics as well as the header latching pins
with one operator movement.
Rapid unblocking
In the unlikely event that the feederhouse becomes
blocked, the powerful reverser will get you harvesting
again in moments.
14 |

3 equal crop streams

The 270° feeding concept is unique to 
John Deere. It ensures a smooth transition from 
a tangential crop fl ow from the beater to an axial 
50% More feedinG crop fl ow for the rotor. More space in the front of 
the rotor makes this transition easier and less
capacity coMpared to power consuming. Power which can be used for 
hybrid coMbines more effective threshing.

single rotor
Multiple tasks: threshing
The single rotor is what makes the S-Series so unique. It gives you clear advantages  1
over other, more traditional and hybrid systems: 
Instead of splitting the crop fl ow in two it keeps a single crop fl ow which consumes 
less power. The large rotor diameter generates higher inertia than smaller rotors 
enabling lower rotational speeds. The result? Better straw and grain quality.  
The “crop on crop threshing” of the rotor allows the effi cient threshing even if not all 
crop hits the concave resulting in a far wider “cross section area” than a tangential 
6
threshing system. 

one coMbine – all crops

it doesn’t matter if you’re harvesting large areas of a single crop or moving
from crop to crop, the S-Series offers true multi-crop capability. Tested in 
36 different crops, you can customise every single component from
the header through to the rotor and residue management system. 
Crop conversion is done quickly and easily with excellent access to 
5
the rotor and fast header conversion e.g. of the 600X. Conversion from 
small grain to rapeseed can even be done at the touch of a button. The 
dual range separator drive can be shifted easily with one lever to change 
the speed, for example corn harvest.
4

effective stone protection

large stones simply fall into the Feed accelerator
Stone Trap (FAST) before they can enter the 
machine and cause any damage.

FaST stone trap

 | 15

heavy duty Grates progressive threshing even transition

heavy Duty Separator grates with dual row The thickness of the straw mat is reduced over The discharge beater ensures reliable and even 
interrupter bars are available for tough, green  the conical threshing area. In the front area the  feeding of the chopper. The grate underneath 
small grain conditions to loosen up the crop mat easiest to thresh grain is removed through gentle the beater adds additional separation capacity.
and improve separation capacity.  and effi cient crop on crop threshing. In the rear 
part of the cone the remaining crop is threshed. 
The overall effect is a very gentle threshing for
the best possible grain quality and the highest 
power effi ciency.

1 2 3

2
3

a sinGle
rotor concept confiGured to fit
european conditions

5 6 7

high capacity feeding even feeding active concave isolation (aci)

The 8 wing beater improves feeding, reduces  The crop is divided into 3 equal streams for  maintains a consistent concave clearance for
noise levels and lowers power consumption. balanced loading of the rotor. This maximises  more performance in large crop yields and
the capacity of the rotor. It also preserves straw  uneven feeding. Enables runnning the concave 
quality as it prevents crop building up in one part  wider for more crop on crop threshing. 
of the rotor with potential damage to the straw.
16 |

‘pull and release’ threshing and separating

Separating The off centre rotor creates a ‘pull and release’ effect with the crop
compressed at the bottom as it passes the grates and is then released as it 
moves towards the top of the rotor. This produces a mixing effect which 
Threshing moves the grain to the outside of the crop fl ow where it is separated through 
Feeding the grates far more effi ciently.

rotor
1

single rotor Multiple tasks:

separating
In the rear part of the rotor, separation of the remaining grains becomes prominent. 
John Deere exclusively offers the choice of two rotor types: We recommend the
TriStream Rotor for lower MOG (material other than grain) conditions. 
The VariableStream Rotor is more more conical at the front. Also, the amount 
of time crop stays in the rotor can be changed from the cab. This will vary threshing 
intensity to react to moist or dry conditions during the day. The Variable stream 
rotor is recommended in rice, where conditions are damp, wet and green or
in diffi cult straw conditions.

1. 2. 3. 4. 5.

VariableStram Rotor – be flexible to conditions

On the S-Series it is possible to slow down or speed up crop fl ow from 
the cab. The operator can choose between two settings. In the standard 
1. 2. 3. 4. 5. 6. 7. position the crop makes 7 full rotations for higher separation of grain. 
However, if the operator wants to improve straw quality or reduce chaff 
load on the cleaning shoe in brittle conditions, he can switch to the advanced 
position. In this position the straw exits the rotor after only 5 rotations. 
 | 17

high inertia separating adjustable top vanes replaceable separator tines

The rear section of the rotor is designed for At the John Deere exclusive variable stream  The use of separation tines instead of separation
maximum separation. Here the diameter of the  rotor the top vanes can keep the material for elements improves the mixing effect and helps
rotor and the inertia created is the biggest. This  more or less time in the rotor for more aggressive move the grain to the outside of the crop fl ow 
leads to increased separation versus competitive separation or better straw quality. for better separation, even in tougher, green 
solutions with smaller rotor diameters. The large  straw conditions. 
fi ngers loosen up the crop mat and ensure 
trapped grain can escape from the straw. 

2 3 4

2 3 4

varistreaM rotor
better crop and Grain separation
with one switch

5 6

low energy discharge even chopper feeding

The tapered rear cone allows material to expand The discharge beater pulls crop out of the rotor instead of the chopper which 
before it is discharged through the 8-wing  preserves the stalks. The impellers provide even distribution of the crop to avoid 
discharge beater. This improves power effi ciency  plugging and feed the entire width of the chopper. This ensures lower knife wear, 
and straw quality. better chopping quality and more effi cient distribution.
18 |

simple adaption from crop to grass designed for high yields

With its 2 speed fan drive, the cleaning fan can be converted from crop to  The returns are guided back through the cylinder and distributed evenly over 
grass in a matter of minutes. Simply adjust the belt instead of having to swap  the entire width of the threshing cylinder. The material is recorded and then 
the pulley. displayed in the cab via the electronic sensors. To manually check the return 
constituents, there is an inspection fl ap just outside the cab door.

1 2

the new dynaflo plus

cleaning shoe:
large, light and less sensitive
How can you considerably enlarge the sieve surface without adding any weight to the 
overall combine? The developers at John Deere have found a brilliant answer to all of 
these questions. The use of an innovative, lightweight design and an aluminium structure 
resulting in reduced weight, which reduces peak engine loads and cuts down on vibration. 
Performance wise this means the harvested crop stays on the sieves longer, maximising
cleaning time and minimising losses. 
The S-Series is designed for the highest capacity. With a total sieve area of 5.10 m² 
(according to international standards (ANSI/ASAE S343.4 T – the area of the opening 
if the louvers are removed, not including the fi nger, step pan or waterfall area) is one of 
the largest on the market.

5 6

through intensive testing, we have developed a completely new combine conveyor augers
cleaning system which is resistant to adjustment errors. The heavy duty conveyor augers ensure active crop fl ow on slopes and under 
For optimum results in changeable conditions, it does not need to be  tough harvest conditions, meaning the cleaning shoe can be evenly loaded 
constantly readjusted, making life considerably easier for the operator. even in damp or sticky conditions.
 | 19

new fan design 2-stage pre-cleaning

The new fan ensures peak performance with up to 740 m³ of air generated.  Unique to the S-Series is DynaFlo Plus cleaning shoe. This is the additional 
A steep pressure curve delivers high pressure and less volume loss. About  fi  xed raised front chaffer which helps thin the crop mat and cleans up to 
30% goes to the front chaffer at high speeds, the rest goes to the rear  40 percent of the free grain before it reaches the main chaffer. A key 
chaffer and sieve. difference to the W/T Series as it adds not only more area but also more 
effective separation to match the capacity of the S Series combines.

3 4

one of the
larGest cleaninG systeMs
on the Market with up to 5.9 M²

7 8

7% hillside performance in base 22% optional easy removal

The sieve, with its considerably enlarged surface, offers the highest cleaning performance. Thanks to  The new sieves are provided with mounts that
SlopeMaster, you can effortlessly conquer slopes of up to 7%. The large sieve area and the perfect  can be installed and removed in a matter of 
air distribution reduce further possible cleaning shoe losses on light slopes. For slopes up to 22%,  minutes.
HillMaster slope compensation comes in handy because it not only reduces walker losses but also 
cleaning shoe losses.
20 |

Active tailings
management –
PERFECTION IN ACTION
The active tailings system is a major feature of
the S-Series. It increases the capacity of the combine
by taking care of tailings separately and makes
adjustment of the combine easier. It delivers better
grain quality at low loss levels and contributes to
more quality straw output and lower fuel
consumption.

PROTECTING GRAIN QUALITY

Thanks to the re-thresher taking care of tailings, the concave
can be opened more widely which lowers power and fuel The elevator with rubber paddles constantly lifts
consumption and improves straw quality. The bottom sieve the material up to avoid material piling up and
can be opened as well as tailings are less which increases being “processed” multiple times.
capacity.
GENTLE THRESHING
A “mini”-threshing drum with real rasp bars and
concave separates kernels still sitting in the ears.
Focus is again to be not too aggressive and to
avoid grain damage. The concave has two settings
controlled by a spring lever to switch between
small grain and corn quickly and conveniently.

EVEN DISTRIBUTION ON THE SIEVE

The material is distributed by an auger on top of
the chaffer. The opening at the bottom of the
auger is triangular in shape so material is spread
evenly instead of dropping at one spot, avoiding
overload of the cleaning system.
 | 21

ACTIVE TERRAIN ADJUSTMENT

If you have rolling terrain and need to go up or Overall, the combine will maintain ground speed
down hill frequently, Active Terrain Adjustment and minimise grain loss with the varying landscape
automatically adjusts fan speed, chaffer position changes. Active Terrain Adjustment increases total
and sieve position. combine capacity on uphill slopes to drastically
This exclusive system even considers the type of crop reduce grain loss. And it reduces your tailings
harvested. As rape seed for example is very sensitive and gives you a cleaner grain tank sample, too.
to fan speed changes, the chaffer and sieve settings But perhaps the most impressive thing: All this is
are changed first before adjusting the fan speed. done automatically so the operator can focus on
the harvest operation.

Active terrain adjustment

automatically adjust
the cleaning shoe settings

Uphill Slopes Downhil Slopes

Going up a hill both the chaffer and sieve are opened while fan speed On declines, the chaffer and sieve close, while fan speed increases to keep
is reduced to stop grain from going out of the rear. The cleaning system grain from pushing towards the front of the machine.
performance increases up to 40% on inclines up to 10 degrees. The tailings volume is reduced by up to 50% resulting in a cleaner grain tank
sample.
22 |

harveST WiThouT ComPromiSe,

even on SloPeS
slopes of up to 7%
John Deere has created a series For cleaning, there’s nothing better than 
of simple solutions aimed at a large sieve surface – except an even
avoiding cleaning shoe losses larger surface. With the S-Series, the 
on light hillside locations: material is cleaned for a longer time on
our extra-long and extra-large sieves.
The conveying augers move the material
evenly onto the cleaning shoe. The slope 
divider plates on top of the chaffer
sieve prevent crop escaping when going
down hill before it has been cleaned.

22% slope coMpensation with hillMaster

HillMaster is available for the 
S670 to the S690. Since the grain 
tank stays level, you can fi ll it up 
and save on unloading stops. The 
improved side-to-side weight distribution 
gives you more traction and stability and 
the level cab helps operators stay focused 
and productive all day.
 | 23

HILLMASTER
100% PRODUCTIVITY on
SLOPES of UP TO 22%
24 |

unloaD in reCorD Time

The S-Series helps you save valuable time even with unloading. The 14,100 L capacity grain tank, 
can be unloaded in record time: up to 135 l/sec. The large diameter unloading auger and low speeds 
are especially gentle on grains. The cross auger cover plate for the grain tank can be adjusted without 
the need for tools, so the unload rate can be altered quickly for different crops.

Visibility is excellent too. With a large  Operations Center on MyJohnDeere.com –  driving so you can continue harvesting

rear window, you always have a clear either manually via uSb device or with full power. With John Deere 
view into the illuminated grain tank and automatically via Wireless Data Transfer Machine Sync, the combine operator 
you can always take a sample from next (WDT).  can have the trailer drive alongside
to the cab. The HarvestMon system can  the combine while unloading. Once in 
determine the grain through the mass position, the combine operator can 
fl ow sensor. This system is simple,  non-stop harvestinG control the ground speed and steering
reliable, can withstand side slopes and  and on-the-Go unloadinG of the trailer. Grain trailer operators can 
is easy to calibrate. Relevant data is  see the grain tank levels of all working
The electronic engine management
displayed in the cab and can be  combines and can be “called” to empty 
provides up to 37 KW/50 hp extra
recorded on the optional greenStar the fullest tank. This saves time, diesel, 
performance during unloading while
2630 and can be transferred to the  nerves and minimises soil compaction. 
 | 25

Less unloading cycles

less time lost unloading
optimum filling of trailers
Easier in-field logistics
less grain spillage during unloading
No damage of windrows for perfectly dry straw

Space-saving fold Improved visibility Unloading auger

The optional folding 6.90 m or 7.90 m unloading A camera mounted on the unloading auger spout Unloading augers in various lengths enable
auger saves space during storage in your barn improves visibility. To ease unloading on-the-go unloading on-the-go and maintain sufficient
and assists manoeuvring in confined spaces. the picture can be transferred wirelessly into clearance to operate headers up to 12.20 m for
the cab monitor of the tractor driving next to on-the-go unloading.
the combine.
26 |

RESIDUE MANAGEMENT
SYSTEMS DESIGNED TO
PERFORM RIGHT FROM
THE START
Our residue management offers a choice of 3 different
chopper systems. It is designed to perform from the very
beginning to enable fine cut, even and wide spread or
a good straw quality for baling.

Our Premium and Intermediate systems are equipped with

a 100 knife, extra fine cut chopper, making sure it can be
incorporated into the soil easily to release the full fertilisation
effect as quickly as possible.
Our Premium system also let’s you switch from dropping to
chopping at the touch of a button. It’s a real time-saver that soon
pays for itself. For example you can quickly go for chopping
headlands or parts of the field with low yields or green straw.

Deluxe

Deluxe Intermediate Premium

Chopper type Fine cut Extra fine cut Extra fine cut
Knives/Counter knives 44/39 100/49 100/49 Premium
Chopper rpm 2500 3000 3000
Electronically adj. vane tailboard option ● ●
Power Cast option X X
Advanced Power Cast X option option
Overshot beater with straw slide X X ●
Chop to drop X X ●
 | 27

Smallest residue size

for better quality bales and
fast decomposition

Deluxe Intermediate Premium

–– 44 rotating and 44 stationary counter knifes –– 100 knife chopper produces one of the finest –– 100 knife chopper produces one of the finest
cuts of straw on the market cuts of straw on the market
–– 2 manual adjustable speeds
–– Two manually adjustable chopper speeds –– Two manually adjustable chopper speeds
–– 3 minute manual conversion between
chopping and dropping –– 3 minute manual conversion between –– Chop to Drop – switch from chopping straw to
chopping and dropping dropping windrows at the touch of a button
–– Chaff is distributed through the chopper or
is dropped below the windrow. No separate –– Chaff is distributed through the chopper or –– Chaff is distributed through the chopper or
chaff spreader needed is dropped below the windrow. No separate is dropped below the windrow. No separate
chaff spreader needed chaff spreader needed
–– No overshot beater and therefore less
power required and less weight compared –– No overshot beater and therefore –– Overshot beater blows chaff to the side of
to premium chopper less power required and less weight compared the chopper, away from the windrow, for bales
to premium chopper without chaff
–– Chops well in dry straw
–– Electric Vane Tailboard or ActivePower Cast –– Electric vane tailboard or Active Power Cast
–– Electrically adjustable tailboard for spread (APC) with two hydraulically driven enclosed (APC) spreader (recommended above 9 m
width up to 9 m discs (recommended above 9 m header width) header width) with two hydraulically driven
enclosed discs and a centre divider with
pendulum motion (left/right)spreading
the material evenly
28 |
 | 29

aDvanCeD PoWer CaST

aCTive SPreaDer
If you are looking for even distribution of the chopped straw this option
is the ideal solution. The position is low in height to reduce the exposure
to side winds. At the same time it accelerates the straw to a maximum
speed to enable an even spread pattern.

The direction of spread as well as the spread width can be conveniently adjusted from the cab. 
When changing driving direction the push of a button is suffi cient to mirror the direction of 
spread as well.
30 |

Get there quicker,

be done faster
Spend more time harvesting and less time travelling between fields. With its automatic
ProDrive transmission, the S-Series allows speeds of up to 40 km/h on roads.

Intelligent speed management to save FOUR WHEEL DRIVE TO MOVE ON IN TOUGH

fuel CONDITIONS
The intelligent engine speed management system With the optional four-wheel drive in combination
reduces the engine speed on roads, saving fuel. with the front-differential lock and increased
And the overall width with tracks is just 3.50 m to torque on the Pro-Drive transmission, even bad
pass narrow roads, bridges etc weather can’t stop you from bringing in your crop.

Push button shifting

Shifting is made easy with the optional push button shift transmission.
Simply bring your combine to a standstill, push one of the three buttons
and let the combine do the rest. Once you bring the joystick into
the neutral position the park brake is engaged automatically.
 | 31

cruise
between fields in comfort
at 40 km/h

The ProDrive advantage

ProDrive transmission gives you precise control of your ground speed across two infinitely variable
speed ranges. You simply set one range for your typical harvesting speed and the other for
transport. All you then have to do is press the button for your chosen range and control the
combine’s speed within that range by pushing and pulling the hydro lever. There’s no need to stop
to change gear. It delivers you 64% more torque at a harvesting speed of 8 km/h to pull through
tough spots or go uphill with a full grain tank.
ProDrive also saves you money. Engine Speed Management automatically controls the engine’s
rpm during road transport. The result is fuel savings of 10 to 20 %.
32 |

Maximum traction
all conditions
The John Deere tracks spread the load evenly over all five traction wheels.
So, in challenging conditions, you’re still harvesting when others have
stopped. And the best: You decide when to use them as tracks and wheels
are interchangeable anytime.
The closed loop hydraulic system also means power is delivered smoothly
and evenly. It helps minimise any potential soil damage and ensures excellent
traction, even at low speeds.
Thanks to the narrower body of the S-Series we were able to build tracks
that are shorter, but wider. This gives you an extra large footprint for
maximum traction and it spreads the load across a wider area. So you’ll also
enjoy lower soil compaction and avoid the additional cost of deep tillage.
The shorter track length also has the added advantage of reducing soil
damage at headlands.

MaXiMuM traction
reduced soil coMpaction
lower transport width

3 4

low compaction off-centre pivot point

With a massive 1.18 m² of contact area per side, the advantages of tracks over  The low turning point of the track unit leads to pivoting upwards of the
tyres are easy to see. You’ll be able to keep harvesting in wet conditions when  tracks instead of downwards. In muddy conditions the track unit is not 
conventional wheel driven machines have long stopped. pushing itself deeper into the ground but rather out of the dirt.
 | 33

excellent traction smooth transport

Our tracks feature a drive wheel which grabs the rubber teeth inside the belt  The hydro-pneumatic suspension cushions dynamic loads so you won’t feel
to move it forward. There is no slippage as the system does not rely on  the road when travelling at high speeds between fi elds. To reduce the wear 
friction like others. Add to this our belt with optimised tread pattern and  during transport the front and rear roller´s hydraulic pressure is lowered.
you’ll enjoy better traction in muddy and wet conditions.

1 2

MaXiMiuM coMfort
and still a top speed
of 40 kM/h

5 6

longer belt life even loading

The drive system (which is not based on friction) ensures even tension  The rollers and central carriage mechanism are independently suspended
and reduced slippage for improved comfort and longer belt life. for more even loading across the entire area of the track which is in contact
with the ground.
34 |

a power boost for agriculture. Made by John deere.

John Deere is one of a few manufacturers of agricultural machines to develop and produce its own
engines. This delivers clear beneifts as agricultural machines and on-road vehicles have completely 
different requirements. Whereas lorry engines used by other makes are designed for travel at variable 
engine speeds and low torque levels, John Deere engines feature heavier duty housings and bearings – 
designed for running at rated speed all day while still being able to cope with abruptly changing 
conditions and varying, often high toque levels, during harvest time. 

More power, more cost

effectiveness, more throughput
The John Deere PowerTech Engines used in the new S-Series deliver even
more power while offering unsurpassed fuel efficiency for diesel and diesel
exhaust fluid (DEF). At the same time, they fulfill strict Tier IV emission
regulations. The engine power is an impressive 460KW/625PS at the top of
the range model, the S690.

S690 with 13.5 L engine 
650 2,000

600 1,800
consistent
550 1,600
perforMance under
horsepower (hp)

500 1,400
torque (nm)

450 1,200 varyinG load

400 1,000

350 800

300 600

250 400

200 200 Torque (Nm) 

1,200 1,300 1,400 1,500 1,600 1,700 1,800 1,900 2,000 2,100 Power (hp)

4
Model displaceMent power
John deere powertech engines
S690 13.5 l 460KW / 625PS
John Deere’s PowerTech engines offer consistent
S685 13.5 l 426KW / 579PS performance for uniform engine speeds and
S680 13.5 l 403KW / 547PS
deliver up to 50 hp extra power during grain tank
unloading.
S670   9.0 l 335KW / 455PS

S660   9.0 l 285KW / 387PS

 | 35

Diesel particle filter enhanced cooling

The fi lter regenerates itself automatically and works in tandem with  The cooling packs are large enough to get you through hot
the diesel oxidation catalyst to ensure clean air. The entire system  harvest days and aren’t bogged down with an overly complex 
is encapsulated within a separate housing and is completely design. The position next to the engine allows unobstructed 
segregated from its surroundings by means of overpressure. air circulation around the engine and prevents dust and dirt
from settling in the corners. The slim size and low fl ow rate of 
the cooling package effectively prevent it from clogging. 

2 3

unparalleled eXperience you can rely on:

– over 7 million off-highway engines produced
– over 22 million operating hours with exhaust
after-treatment processes
– over 60 million operating hours with Tier 3b
engines
– Over 200 million operating hours with variable 
geometry turbochargers and cooling exhaust 
gas recirculation
– The use of a the same engine across numerous
John Deere machines simplifi es maintenance 
thanks to uniform replacement components
such as fi lters and oil 
– your John Deere sales partner is a trained engine
specialist with long-term experience and can
provide valuable support for all your challenges

5 6

drivetrain designed for the utmost reliability engine speed management

As standard, the S-Series comes equipped with discs instead of belt clutches.  The engine speed management improves the fuel
It shifts gears in a highly controlled fashion, keeping the belt from “squeaking”  effi ciency by reducing the engine RPM from 2200 
when the machine is turned on and increasing its operating life. The drum’s high  (and 2100 for 13.5 L engine) to 1600 revolutions during 
fl  ywheel mass ensures extremely even load distribution, preserving the drivetrain.  on-road travel and to 1200 revolutions when the machine
The Posi-Torq Variable Drives automatically tension the drive belt and prevent it  is standing (such as at traffi c lights).
from slipping.
36 |

a more eFFiCienT anD

relaXing Way To WorK
Welcome to one of the most productive and comfortable places to work
in the industry. The S-Series’ roomy Premium Cab is loaded with a host
of smart details to help you perform at your best while keeping you
relaxed, even on long working days and under the toughest of harvesting
conditions. And thanks to the tinted glass around the entire cab, the
slimline cornerpost and highly ergonomic control elements, you always
have a clear view – and are always in control.

a great view
The cab was designed specifi cally for combines. 
it provides an excellent view to the front and
sides of your machine – such as when unloading
the grain tank.
 | 37

Leather package for greater comfort Roomy instructor seat and refrigerator
For extra comfort, a leather air suspension The S-Series cab is one of the widest on the
seat is available as an option for the Premium market. This means the passenger has just as
Cab. The hard-wearing leather upholstery is much room as the operator. And there’s also
complemented by a matching leather-covered enough space for a refrigerator with an
steering wheel. Even better, the seat is air- impressive 37 L interior – perfect for storing
cooled, making even the longest of harvesting large bottles and snacks for a long working day.
days easier.
38 |

information and control centre bluetooth connectivity

The greenStar 2630 Display delivers much more than touchscreen operation Whether you’re coordinating logistics processes via your smartphone during
and a brilliant 26 cm colour display: It also supports documentation of key  harvesting, consulting with your dealer on the best settings, navigating to 
harvest data and allows you to enter it into the online MyJohnDeere.com  the next fi eld with the help of your tablet, or playing your favourite music 
portal via a USB stick or wirelessly over your mobile data connection. from your MP3 player – with Bluetooth, you’re always well connected.

1 2

quick Stop button

autoTrac

header resume

header Float

everything in its place header height/tilt

manual control

Our secret recipe for perfectly intuitive operation? reel up/down – fore/aft
The perfect balance between direct-access functions
unloading auger swing in/out
on the armrest and functions operated via a
touchscreen monitor. This ensures that seasoned unloading auger on/off
John Deere operators are more familiar with other
machine Sync fore/aft control
brands and can find their way around the features
quickly and effortlessly.
activation of harvestSmart automatic speed
management function

Engine speed, electric park brake, gears. 
With ProDrive, switching between 
Mode 1 and 2 (such as fi eld/road)

road safety switch, hot keys for fold away

functions (grain tank, unloading auger, 
corn header)

Air compressor button

radio and bluetooth controls

full control in the palm of your hand

The ergonomic MasterControl lever provides remarkably smooth hydrostatic speed control and enables 
you to operate a host of other functions such as the in/out swing of the unloading auger, feederhouse
raise/lower, reel raise/lower and reel fore/aft, AutoTrac activation and the control of the 600X header. 
If the combine is equipped with MachineSync the tractor position can be changed back and forth with 
the buttons on the rear of the lever, too.
 | 39

Greenstar 3 command centre

Even in its base version, the GreenStar 3 Command Centre Display enables 
numerous settings. This includes automatic basic machine settings, Interactive 
Combine Adjust (ICA), Harvest Monitor crop and moisture monitoring features, 
the harvest Smart feedrate control, autoTrac automatic steering or autoTrac
RowSense guidance for harvesting corn. It is possible to connect an external 
camera.

Header drive incl. reverser and threshing 
cylinder

header height control, hydraFlex

pressure control
adjustment of reel speed to driving
speed

Hot buttons for all relevant cylinder, 
chaffer/sieve and chopper settings

Hot buttons for monitor menus on 
greenStar 3 2630 Display

Differential lock (on ProDrive), 
four-wheel drive speed (slow/fast); 

hvaC controls

Control buttons for HillMaster 
slope-driving system if equipped

beacon controls
40 |

Connected Combine.
Your technology advantage
John Deere is committed to setting new standards in connected
agriculture – because we believe that this offers tremendous
potential to boost productivity, save valuable time and lower costs.
We have identified the best technologies currently available on
the combine market and brought them together in a single highly
attractive package:
– AutoTrac automatic steering
– Connected customer support
– Connectivity to Operations Centre
– Interactive Combine Adjust
– FarmSight Service Package

Interactive Combine Adjust (ICA)

ICA enables you to boost the performance of your
combine, minimise losses and increase grain
and straw quality. And best of all, you can let
the system work on these goals simultaneously.

AutoTrac automatic steering system

AutoTac guidance reliably steers your combine
from day to night, through dusty or on hilly
terrain. This prevents costly overlaps or gaps and
enables every operator to harvest at peak
performance. You can expect up to 8* percent
input savings and up to 14** percent productivity
increase.
 | 41

up to 14%
greater machine
productivity*

Go to the Operations Centre to allocate exact Connected customer support

field locations for the the next harvesting Leveraging the machine-to-office connectivity
campaign, track the work progress of your your John Deere dealer can (with your permission)
machines, easily assign work orders to your maximise machine uptime through preventative
operators, view yield and moisture maps maintenance. For example, he can remotely check
automatically sent from the field as well as machine health and identify potential issues
create, analyse and share harvest reports before they actually stop you from working. With
with trusted advisors and customers. Remote Display Access you or your dealer have a
live connection from the office to the GreenStar
2630 on the combine to assist the operator with
machine setup and operation – without the need
to drive out to the field.

*From ‘Lohnunternehmen’ 1/2010

**From ‘Landtechnik’ 6/2006
42 |

aChieve more
WiTh leSS eFForT
autotrac: autoMatic steerinG for leveraging row feelers on the header – to
Greater precision increase harvesting speed. When row feeler 
information is not available, for example in down 
With our satellite-based hands-free AutoTrac 
crop situations, the GPS signal takes over. 
system, every pass matches the full cutting width
of your platform. This helps you reduce your input 
costs and boost your combine performance – 
autoMatic coMbine adJust (aca)
even at night, in dusty conditions, on hillside
terrain and even after long hours of operation.  Standard on all models within the series,
The automatic steering relieves your operators Automatic Combine Adjust helps you effortlessly 
and allows them to concentrate on their yield.  transition between crop types. By using standard 
John Deere values and retrieving data on your
When working with multiple machines in a fi eld, 
current threshing and separating conditions,
the AutoTrac guidance lines can be shared from 
it automatically adapts your machine to optimise
one machine to another so that all combines 
its performance. You can then use these 
can harvest at the full cutting width. They can 
proposed values or modify and save them for
also be shared with the tractor or grain trailer 
later use. 
operator so the machines can drive exactly
parallel to each other during unloading. 
Coverage map sharing visualises on the screen harvestsMart: always the riGht speed
where other combines have already been in the 
The harvestSmart system automatically adapts
fi eld and you get a more accurate calculation of 
the speed of the combine to maximise capacity 
the total hectares harvested as you have full
or minimise losses with the highest output. 
visibility of all combines in the fi eld, the passes 
Sensors on the threshing cylinder, the engine
made, header width and area covered. 
and the dedicated loss sensors control
autoTrac rowSense adds even more comfort the system with the goal of minimising losses
and productivity to corn harvest. It merges GPS  or maximising the throughput rate.
based automatic steering and row guidance – 

starfire 6000 receiver

accessing John Deere’s precision farming solutions starts with the new
StarFire 6000 Receiver. Capabilities include better signal stability for 
maximum uptime and new SF3 accuracy delivering in-season repeatability. 
That means for you: the receiver always keeps you on track whatever the
conditions are. And with the StarFire 6000 receiver you get repeatable results 
– no guidance line or boundary drift – throughout one season. Which adds 
even more precision and productivity. 
The StarFire 6000 receiver works seamlessly with all John Deere guidance
systems and all accuracy levels (SF1, SF3, Mobile and Radio RTK). 
 | 43

up to 15% More
productivity with
interactive coMbine adJust*

top-of-the line precision interactive coMbine adJust (ica)

The StarFire 6000 receiver truly enables precision productivity.  The Interactive Combine Adjust function lets you defi ne your 
you can choose from the following accuracy levels: own priorities (grain loss, grain damage, grain tank sample).
Also several optimization goals can be worked on at the same 
– improved sf1 with 15 cm pass-to-pass accuracy, free of
time (e.g. poor grain tank sample and high grain loss). ICA then 
charge
suggests possible solutions which you can adjust or reject. 
– new sf3 enabling 3 cm pass-to-pass accuracy and
All non-stop settings (cylinder speed, concave clearance, wind 
in.season-repeatability. 
speed, chaffer and sieve settings) are automatically adjusted
– rtk with 2.5 cm pass-to-pass accuracy, featuring long-term
once accepted until the optimum setting is found. 
repeatability including 14 days RTK Extend if you lose line of 
sight. The ideal solution for Controlled Traffi c Farming. all stop settings, for example, the setting of the feederhouse
front drum are also included to make sure the optimum
performance can be achieved. 

*according to Rademacher RKL 03/2015

44 |

YOUR GATEWAY TO BETTER

BUSINESS DECISIONS
Modern farming isn’t just managing a business – you are managing a complex enterprise.
That’s why maximising performance and productivity depends on being well connected.
The Operations Centre on MyJohnDeere.com makes things easy. it’s your central location
to connect to your fields, machines, operators and partners. Simply log-on from any
internet-capable device.

YOUR FARM IN YOUR POCKET On top of that, JDLink Connect delivers Remote
Display Access and Wireless Data Transfer to enable
Basically, the John Deere Operations Centre fits
machine optimisation, remote operator support
your farm into your pocket. On one central map,
and seamless transfer of agronomic data (e.g. field
you can get an overview of ongoing operations,
boundaries, yield maps) in one package.
follow your machines during the day as well as
visualise and manage your fields and agronomic
data. Upload field boundaries, yield and moisture
Seamless data management
maps from your GreenStar 2630 display. All
information is easily accessible and clearly arranged Data on yield or moisture can either be uploaded
on a map. From the Operations Centre, you can also manually to the Operations Centre, leveraging
connect to your John Deere dealer or other trusted a USB device or automatically with Wireless Data
business farmers to share data – harvest results Transfer to enable seamless and error-free
with your customers – for instance. documentation. For older, non-JDLink machines
there’s also the possibility to transmit data via
Mobile Data Transfer, utilising your smart phone.
JDLINK MACHINE CONNECTIVITY
Once the data is available in the Operations Centre
It all starts with machine-to-office connectivity. you can – given, that you didn’t have time for
With John Deere’s telematic system, JDLink, you weight calibrations during harvest – retrospectively
always know where your machines are, what and calibrate your data and print it out in the form of
how they’re doing. You basically have two options a report.
delivering different levels of functionality. JDLink
In addition, the Operations Centre lets you prepare
Access includes machine location and performance
set-up information for the upcoming harvesting
monitoring, e.g. fuel consumption and machine
season to ensure error-free documentation.
utilisation tracking. Essential functionality is even
The files can be sent wirelessly to your equipment
available for non CAN-Bus tracking enabled
where the date will pre-populate on the Greenstar
John Deere as well as non-John Deere machines.
2630 display.
 | 45

MyJobs and MyLogistics Apps: Ultimate coordination for a 100% Field navigation
optimised harvesting chain Stop searching for the right way to the right field. Start your work
With this new John Deere system there is NO need for paper, phone and immediately. With one click you get an optimised route to the field or
magnetic boards any more. Plan jobs ahead digitally. Remain flexible to the lead machine.
changing conditions. Drag and drop jobs in your office and in the field. No detours as it respects road restrictions (e.g. width, height and weight).
Drastically reduce the amount of phone calls and still avoid Field boundaries, entry points, obstacles – it´s all there! Estimated time of
miscommunication! arrival for transport vehicles enables you to always make the best decision.
All information is now in one work order. Your employee knows what to do It includes field roads and fleet overview and also works offline.
and has all the relevant information instantly available: Machine, customers,
fields, settings, guidance lines and more.
Always see the current job status of your fleet to be able to give precise time
commitments.
46 |

Go Harvest
Premium Combine Simulator
This simulator was designed for dealers or large fleet equipment, harvesting under different conditions
owners and contractors to be able to train operators and different crops, to unloading on-the-go or on
in a cost efficient way. It is commercially available the headland. At the final level operators have to
for customers and was rewarded at Agritechnica optimise the combine and solve specific tasks such as
with a silver medal. It features real cab controls and high losses or get a better grain tank sample. Scores
a real-world operator environment and simulated field measure the progress of the trainee at each level.
conditions on HD-TVs. Instructions and tasks are The simulator offers off-season training in a safe
given on the TV screens in a gaming environment environment with clear benefits in timing, cost
with several levels. It starts at simple operation of and effectiveness. Result: A perfectly trained operator
the main controls, goes over attaching front-end at the start of the season from day one.
 | 47

MACHINE SYNC –
unloading on-the-go
The full automation of the combine unloading 2. Combine operator takes control of tractor speed
operation is exclusively provided by John Deere. Once he arrives near the combine his tractor is
Machine Sync enables the creation of a network of controlled by the combine via a click on the screen.
combine operators and the logistic chain: The tractor and grain trailer is kept in parallel to
the combine and the speed is synchronised with
the combine, too.
1. Control grain tank fill level
The grain trailer operator is able to see the location of
all the combines in the network, their direction of 3. Combine operator steers tractor
travel and the grain tank fill level. Based upon this he The combine operator can control the forward
can effectively decide which combine to go to next. and side distance of the tractor relative to his
combine and can unload and fill the grain trailer
while keeping full focus on the harvesting operation.
There is less risk for damage or grain spillage and
less traffic soil compaction on the field.
48 |

your John Deere Dealer –

A TRUE HARVESTING PARTNER.
“It’s tough out there during the harvest
season because time is money. Your
certified combine dealers are there to
make sure your harvest runs smoothly –
whatever it takes.”
 | 49

A certified partner
is always there for you

To guarantee you always benefit from a first-class harvesting service,

before, during and after harvest, our dealers pass a rigorous certification
programme. Please challenge us – we are prepared!
Simply ask your certified John Deere partner about the following services:

SPARE PARTS WITHIN 24 HOURS

Your Harvesting Partner takes advantage of the John Deere dedicated overnight parts delivery
system day in, day out and can provide more than 97% of all required parts within 24 hours to keep
you moving.

BACK UP*
Your dealer keeps you harvesting during those long harvesting days and provides a back-up
machine if service work is required.

EXPERTS IN PLACE
Certified dealers have full-time harvesting experts in place on the sales and service side to help
you find the right model and specification required for your operation and are available during
extended opening hours in season through dedicated hotlines. Factory trained experts set up
your combine prior to the season and visit you in the season to make sure your machine is always
running at the optimum performance level.

TRAINING
Certified dealers deliver professional operator training carried out by factory trained experts.
This training is offered year after year to refresh the knowledge season-by-season.

EXPERT CHECK
Certified service specialists check your machine on over 180 points. They provide you with
pre-season expertise to ensure your combine is ready for the next season.

USED COMBINES: PREMIUM INSPECTED*

Check out www.machinefinder.co.uk for our Premium Inspected Used Combines. All Premium
Inspected combines have received the Expert Check. All necessary repairs are executed using
original John Deere Quality parts to ensure your harvesting success.

*Available at participating dealerships

50 |

LOW COST OF OPERATION

The initial purchase price of a combine is only one element in calculating the profitability of
an investment into a new combine. To get the full picture the running costs over the whole
lifetime have to be considered. And here the S-Series has clear advantages.

LOW WEAR PARTS COST LOW MAINTENANCE COSTS

The S-Series design features a single rotor concept The single rotor design features less drives, belts,
with a low amount of moving components. chains and bearings as well as less grease points
The crop-engaging wear parts are designed to last. compared to other concepts. The superior access
Tested and proven on a large scale worldwide on to the rotor at the heart of the combine ensures
small grain farm operations as well as in the maintenance is easy and convenient - a prerequisite
abrasive conditions of rice or soybean harvest or to make sure it is done properly. No daily grease
wet and dry corn conditions, the S-Series concept points and in general long maintenance intervals,
earned its reputation for reliability. keep you in the field and reduce maintenance times
and costs.
S-Series combine owners can benefit from more
than 32% cost advantage on drive train parts.
A straight forward drive concept with a low amount
of belts and chains keeps your costs at a minimum.
In addition, genuine belts feature a special rubber
mix with aramid cords that have been designed for
heavy duty loads for the best performance.

Quantity of drive train parts Number of Grease points

40 25

20
30
Number Drive Train Parts

Number of Grease points

15

20

10

10
5

0 0
50 200 400 10 50 100 500 50 200 400 10 50 100 500 hours

John Deere¹ Competitor 1² John Deere³ Competitor 2⁴ John Deere¹ Competitor 1² John Deere³ Competitor 2⁴

S680 S670 S680 S670

According to competitive benchmarking done with comparable Stage IIB machines

¹Operators Manual John Deere S690 ²Operators Manual Claas
³Operators Manual John Deere S670 ⁴Operators Manual New Holland
 | 51

help with your

combine harvester settings
in seconds

JDParts.com Online Parts Catalogue EXPERT Check – The John Deere after-harvest Maintenance and Extended Warranty
All our parts catalogues are digitalised and check Programmes
always up to date. You can look up parts using Your certified service technician will check over PowerGard Maintenance contracts include
the cut-away pictures or via part number search 180 check points on your combine during winter the standard servicing and scheduled replacement
and order online for collection at your dealership. to maximise uptime during the next season and by your John Deere dealer of parts, using genuine
If you order prior to the daily deadline the part is boost your machine’s resale value. components, lubricants and coolants without
available overnight. Our dealers stock the most additional warranty.
important harvesting parts themselves, have PowerGard Protection also provides warranty
visibility to parts in all other dealerships coverage of repairs on all engine, transmission
world-wide or get delivery overnight from and frame components up to 5 years / 2000 hours.
our central stock in Bruchsal, Germany. PowerGard Protection Plus covers engine
auxiliaries, electrical components, steering
and brakes, hydraulics and the operator’s
station on top of other programmes.
52 |

Service and maintenance

made easy
The S-Series doesn’t just save you time in the field and on the road –
but also on maintenance and cleaning. To make these tasks as simple
and quick as possible, we always kept the operator in mind during
the design process:

–– No daily lubrication points

–– Easy access to the rotor, engine and cooling package are just few examples
–– A new air compressor with a 60 L reservoir and two connections, a 10 m hose
and accessories so your machine can be cleaned comfortably

Short conversion times between Corn and small grain

–– Changing the sieves just takes few minutes, adding de-awning plates to the rotor
is easy thanks to the good access.
–– The cover plate for the grain tank cross augers can be adjusted without any tools.
–– Converting from barley to rapeseed with the new S-Series and the 600X header
takes less than 5 minutes.

Turn night into day

The S-Series comes fitted with 10 lights in the front as standard – with the option of
adding two extra lights for wider headers. A LED and service light package for lights
on all key maintenance points round off our lighting packages.
 | 53

daily
GreasinG
in 0:00 Minutes

operator package included up to 1250 litre fuel tank Goharvest app

Every combine operator will receive clothing and  The large, up to 1250 litre fuel tank, as well as The GoHarvest App, available for free for your 
merchandising from his dealer as well as a fully the adblue and hydraulic tank is within easy reach  smartphone, will suggest initial settings for
equipped toolbox.  from the rear platform. specifi c crop types. This includes photos and 
videos of important settings around the machine. 
in the notes section you can write down your
individual settings found in specifi c conditions 
for future use.
54 |

oPTimum PerFormanCe
In order to bring your machine to the next level of performance and comfort we
offer several attachments to upgrade your machine if not equipped ex-factory.
A small selection can be found on the next page, but there are far more. Just ask
your John Deere dealer.

printer premium Maize elements (cz4) tailings cover

Cab integrated printer attachment for  The CZ4 chaffer is especially for maize harvest.  The tailings cover is recommended for working in
the printing of harvesting results. The special tooth design (bend) will minimise  wet maize and CCm to prevent overload of the
the risk of blocking and ensure optimum cleaning  tailings system.
shoe performance. 
 | 55

Camera System Additional Grain Tank Sensor Rotary screen brush kits
The John Deere Video Camera System lets you The fast and easy way to let you know when your Help keep your engine from overheating during
observe your daily work and enables you to combine`s grain tank is full when harvesting on harvest. This brush kit keeps the rotary screen
operate more efficiently. You can connect up to hillsides. clear of build-up and minimises blocking.
three cameras on your GreenStar 2630 display.
56 |

Specification

Model S660 S670 S680 S685 S690

Engine
John Deere PowerTech PSS Engine, 6 Cylinder, twin turbo charger with fully automatic EGR and SCR technology
Emission Level Stage IV Stage IV Stage IV Stage IV Stage IV
Displacement (l) 9 9 13.5 13.5 13.5
Rated speed 2,200 2,200 2,100 2,100 2,100
Rated power ECE R120 (KW/hp/PS) 249/334/339 292/392/397 353/473/480 373/500/507 405/543/551
Max Power ECE R120 (KW/hp/PS) 285/382/387 335/449/455 402/540/547 426/571/579 460/617/625
Boost (kW/hp/PS) 25/34/34 25/34/34 37/50/50 37/50/50 37/50/50
Engine Speed Management NA incl. w/ ProDrive base base base
Fuel tank capacity, base/option (l) 950/750 1250/950
DEF tank capacity (l) 54.9 (29 L when 750 L diesel tank is chosen)
Air Compressor Optional
Feederhouse

Conveyor chains regular feederhouse 4

Conveyor chains HM feederhouse Not available 3

Slip Clutch 1200NM forward / 1400NM reverse
Header reverser Mechanical reverser
Feederhouse Speed, m/sec (fix speed) 3.4 (26 tooth sprocket)
Cutting angle adjustment, ° 17
Threshing & Separation
TriStream rotor with fixed crop flow
Available Available Available Available Available
(not on HM)
Variable Stream rotor with long front cone, rear
Available Available Available Available Available
cone, actively adjustable crop flow in separator
Rotor length (mm) 3,124 3,124 3,124 3,124 3,124
Rotor diameter (mm) 762 762 762 762 762
Shiftable rotor speed ranges, corn/small grain
210-550 / 380-1,000 210-550 / 380-1,000 210-550 / 380-1,000 210-550 / 380-1,000 210-550 / 380-1,000
(rpm)
Threshing area (m²) 1.1 1.1 1.1 1.1 1.1
Rotor separation area (m²) 1.54 1.54 1.54 1.54 1.54
Discharge beater grate separation area, premium
0.36/0.52 0.36/0.52 0.36/0.52 0.36/0.52 0.36/0.52
residue/deluxe + intermediate residue (m²)
DynaFlo Plus cleaning system with auger type preparation system front chaffer, chaffer and sieve
# of conveying augers 4
Active tailings reuturn Not available Base
Single range fan drive (RPM) 620-1,350
Pre-Chaffer (m²) 0.5
Chaffer (m²) 2.5
Sieve (m²) 2.2
TOTAL cleaning Shoe area (m²) 5.2
Active Terrain Adjustment Option
Electric Sieve adjustment Base
 | 57

Model S660 S670 S680 S685 S690

Grain Tank
14,100 14,100 14,100
Volume acc. ANSI/ASAE S312 norm (L) 10,600 10,600
(10,600 for HM) (10,600 for HM) (10,600 for HM)
Unloading auger swing range (deg.) 105
Standard unloading system at peak performance (L/sec) 120 120 135 (120 for HM) 135 (120 for HM) 135 (120 for HM)
Residue Management
Deluxe Residue – Manual adjustable Vane Tailboard
Available Not available Not available Not available Not available
Fine Cut Chopper (44 knives), Integrated Chaff Spreader

Deluxe Residue – In-cab electrically adjustable

Vane Tailboard Available Available Not available Not available Not available
Fine Cut Chopper (44 knives), Integrated Chaff Spreader

Deluxe Residue – In-cab operator controlled PowerCast

Powered Tailboard with wind compensation Not available Not available Not available Not available Not available
Fine Cut Chopper (44 knives), Integrated Chaff Spreader

Intermediate Residue – In-cab operator controlled

Electric Vane Tailboard
Not available Available Available Available Available
Extra Fine Cut Chopper (100 knives), Integrated Chaff
Spreader

Intermediate Residue – Advanced PowerCast powered

tailboard with In-cab operator controlled wind
compensation Not available Available Available Available Available
Extra Fine Cut Chopper (100 knives), Integrated Chaff
Spreader

Premium Residue – In-cab operator controlled Electric

Vane Tailboard
Not available Available Available Available Available
Extra Fine Cut Chopper (100 knives), Integrated Chaff
Spreader, Remote chop to drop door

Premium Residue – Advanced PowerCast powered

tailboard with In-cab operator controlled wind
compensation Not available Available Available Available Available
Extra Fine Cut Chopper (100 knives), Integrated Chaff
Spreader, Remote chop to drop door

Side-Hill Systems
HillMaster (inclines up to 15%) NA Option
Side Hill Kit (for non HM machines) Option
Ground drive
Electrical Push Button Shift 3-Speed Transmission Base Not available
ProDrive Stepless Transmission Not available Option Base
Speed with wheels (km/h)
20/25/30 20/25/30/40 20/25/30/40
(depending on country & homologation)
Speed with tracks (km/h)
NA 20/25/30/40 20/25/30/40
(depending on country & homologation)
4WD Option

John Deere 600DT Deluxe Tracks NA Option

58 |

Specification

Model S660 S670 S680 S685 S690

Transport width

With 600DT Deluxe Tracks [m] NA 3.49

VF710/70R42 R42 [m] 3.49

IF800/70R38 [m] 3.79

IF900/60R38 [m] 3.99

Maximum Shipping height with tyres [m] 4

Shipping length (with 6.9 m folding unloading
9.1
auger) [m]
Integrated Technology

HarvestMon Moisture Sensing Optional

HarvestDoc Yield Documentation Optional

HarvestSmart Automatic Forward Speed
NA Option Base
Regulation
AutoTrac Guidance Option

Guidance Signal Availability SF1, SF3, RTK

AutoTrac Row Sense Guidance for corn headers Option

Automatic Combine Adjustment Base

Interactive Combine Adjustment Base

ConnectedCombine Option

JDLink Option

Remote Display Access Option

Wireless Data Transfer Option

Data Analysis Available via MyJohnDeere.com

myJob Apps Available via App

Machine Sync Option

Cab

Operator Seat Air suspension seat with swivel and fore-aft and lateral attenuation

Leather Package NA Optional leather steering wheel, instructor seat, heated / air ventilated operator seat

Passenger Seat Base

7’ GreenStar CommandCenter 3 Touchscreen
Base
Display
10’ GreenStar 2630 Touchscreen Display Option

Cameras Optional (up to 4)

Active Refridgerator Base

Automatic Air Conditioning and Heating Base

 | 59

Unloading auger compatibility

Scenario 1 Scenario 2 Scenario 3

Auger Length [m]

Platform 5.6 m 6.9 m* 7.9 m* 8.7 m

615P Depending on windrow cutting width

620R/ 620 PremiumFlow/ 620F Run on windrow Scenario 3 Scenario 3 Scenario 3

622R/ 622X/ 622 PremiumFlow/ 622F Scenario 1 Run on windrow Scenario 3 Scenario 3

625R/ 625X/ 625 PremiumFlow/ 625D/ 625F Szenario 1 Run on windrow Run on windrow Scenario 3

630R/ 630X/ 630 PremiumFlow/ 630D/ 630F Szenario 2 Run on windrow Scenario 1 Run on windrow

635R/ 635X/ 635 PremiumFlow/ 635D/ 635F Not compatible Scenario 2 Run on windrow Run on windrow

640X/ 640 PremiumFlow/ 640D Not compatible Very close to FEE Scenario 2 Scenario 2

*Available as folding unloading auger and rigid unloading auger

 nothing runs like a deere
There´s no time for downtime when you`re harvesting, so our dealerships are geared
to provide you with the best support in the business. They know your operational
needs as well as your machines and have received regular in-depth training from
John Deere. This expertise, together with the finest parts delivery service in the
industry, is what makes your partnership with your John Deere dealer so valuable.

YY1614203ENG_GB  11/16  R

John Deere Financial – A range of finance options as powerful as our products.

Contact your John Deere dealer for a comprehensive range of finance options to suit the specific needs of your business. Not available in all countries please consult your
local dealer.
This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include finance,
credit, insurance, product options and accessories not available in all regions. Please contact your local dealer for details. John Deere reserves the right to change specification
and design of products described in this literature without notice. The green and yellow colour scheme, the leaping deer logo and the JOHN DEERE word mark are trademarks
of Deere & Company. JohnDeere.com